• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.05a
• /
• pp.201-205
• /
• 2005

This work presents a study on development of a practical and quantitative technique for assessment of the structural health condition by piezoelectric Impedance-based technique associated with longitudinal wave propagaation. The natural frequency of the object has a tendency of frequency shifting according to hole size corresponded to real structure crack and crack size. In order to estimate the damage condition numerically, we suggest the evaluation method of Impedance peak frequency shift hF in this paper.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2008.11a
• /
• pp.311-316
• /
• 2008

It is needed to assess the impact of the road traffic noise for city planning. In Korea, the current noise impact assessment h3s not yet considered the impacts of the multiple reflection, the deflection and the ground attenuation caused by buildings and other obstacles. A noise map is useful tool to solve this problems. But before everything else, suitability of noise map must be assessed for variety of geometry conditions. In this study, we assessed suitability of road traffic noise map by compared measured noise levels with predicted noise levels from each road traffic noise map for Site A, B and C.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.20 no.6
• /
• pp.515-520
• /
• 2010

The noise map has been applied to predicting the effect of noise and establishing the noise abatement measure for several years overseas. However the introduction of the noise map in Korea is at the initial stage. Thus, we surveyed the several prediction models for road traffic noise used in EU, and the method of applying the noise map in noise impact assessment. In order to improve the noise impact assessment we have to apply the noise map, and propose the guideline of predicting the road traffic noise. We intend to obtain coherency and accuracy of prediction results. As a result of this study, we know that the prediction guideline is an essential prerequisite in order to predict the unified and accurate road traffic noise.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.05a
• /
• pp.127-131
• /
• 2007

A laboratory study on low frequency noise assessment was carried out to determine the acceptability limits in the frequency range between 20 and 200 Hz. The acceptability limits were tested in the anechoic chamber to minimize the background noise. A total of 30 test subjects, who were aged between 19 to 33 years, participated in this study. They were exposed to various stimuli for about 1 hour by supra-aural earphone. The experiment consisted of two listening sessions; hearing threshold and the acceptability limits session. The results showed that the trend of the acceptability limits curve was approximately equal to C-weighting curve which had been found to be superior to A-weighting curve in low frequency noise assessment.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.05a
• /
• pp.1057-1061
• /
• 2007

Noise maps can be widely used to estimate the effect of various kinds of existing noise on people and to predict the future noise situation resulting from urban development projects, etc. In particular, countermeasure for the noise can be considered more effectively by using assessment methods of noise exposed population for specific noise levels, areas, and building types which are the main input factors in noise maps. In this study, effective assessment method of noise exposed population is presented by manufacturing facade noise maps depending on Korean house types.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.23 no.12
• /
• pp.1056-1065
• /
• 2013

Noise generated from Construction site has been raised most civil complaints to 64.4 % among the environmental pollution in 2011. Therefore, local government recommends and prescribes that construction sites over a certain scale install sound level meter for noise monitoring. For example, Seoul has implemented a 24 hour noise monitoring system, with real time communication, to the large construction sites more than 10,000 $m^2$ from the end of August 2012. But it is difficult to use noise measurement data for the construction noise assessment, since the installation standards and technical specifications for construction noise monitoring system are not presented. In this paper, we proposed noise monitoring system improvement plan including technical specifications and installation standards using the investigating results of the problems of current noise monitoring system and the foreign cases.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.16 no.7 s.112
• /
• pp.720-728
• /
• 2006

A robust damage assessment technique is presented such that the location and severity of damage in structures can be identified using measured modal data. In order to identify the damage efficiently, the concept of design of experiment using orthogonal array is used for screening the main effects of each parameter which corresponds to possible damage location in FE model. Then, Taguchi method, which has been widely used for robust design in industry, is applied to parameter updating in analytical FE model. The numerical simulations of a truss structure show that damages in structure can be located from updated parameters.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.11a
• /
• pp.191-196
• /
• 2001

The conventional methods for noise control attempts to simply reduce the level of product noise. This has been common practice in noise control industry. However, it is very straightforward common sense that we have consider human perception on noise. In this paper, we propose a noise control strategy which takes into account the subjective perception of product noise. We especially has concentrated on a refrigerator noise. The proposed method is composed of 3 steps. Firstly, the actual refrigerator noise signal is measured. Then, to make the sample noise set for subjective assessment the noise signal is edited in 1／3 octave bands. Finally, we establish a strategy of refrigerator noise control by using the results from subjective assessment of these noise signals

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.05a
• /
• pp.289-291
• /
• 2006

The noise pollution caused by air traffic is one of the popular environmental issues, which consistently gives rise to public discussion today especially among local residents near airports. But, because there is a growing tendency that large residential areas are constructed in flatlands around airports due to a high population density, the importance of the EIA in connection with aircraft noise is increased to take precautionary measures. Therefore, this paper examines the present status and the improvement plan of aircraft noise impact assessment.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.11a
• /
• pp.55-58
• /
• 2005

This study was Performed to grasp of the problem and improvement in traffic noise environmental impact assessment(EIA). National institute of environmental research(NIER) traffic noise prediction model is in general use in internal EIA. In this study, NIER noise prediction model need to improve in that the predicted results lower than the measured results. The other predict model(KLC KEI) is more accurate. Also the volume and speed of traffic is need to standardize in traffic noise prediction.