• Safety and Health at Work
• /
• v.9 no.2
• /
• pp.125-132
• /
• 2018

Background: According to the US Bureau of Labor Statistics, musculoskeletal disorders (MSDs) accounted for 32% of all nonfatal injury and illness cases in 2014 among full-time workers. Our objective was to review and summarize the evidence linking occupational exposures to vibration and awkward posture with MSDs of the shoulder and neck. Methods: A literature search was conducted using the terms musculoskeletal disorders, vibration, and awkward posture. All types of observational epidemiologic studies, with the exception of case reports, published during 1998-2015 were included. Databases searched were MEDLINE (Ovid), Embase (Ovid), Scopus, Ergonomic Abstracts, NIOSHTIC-2, and Health and Safety Science Abstracts. Results: Occupational exposures to whole-body or hand-arm vibration were significantly associated with or resulted in MSDs of the shoulder and neck. Awkward postures while working were also associated with MSDs in these locations. These findings were consistent across study designs, populations, and countries. Conclusion: Occupational exposure to vibration and awkward posture are associated with shoulder and neck MSDs. Longitudinal studies are required to elucidate the mechanisms responsible for these associations, and intervention studies are warranted.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.21 no.12
• /
• pp.1177-1184
• /
• 2011

One of the main objectives of noise control act is to define and ensure application and respect of noise exposure limits. Most advanced countries have prepared a legal framework for noise limits either by national laws, ordinances or municipal by-laws. A large number of advaced countries have adopted the Leq index for the main sources of noise(road, railway, industry). The exception is aircraft noise for which regulatory practice is highly disparate. These differences in the indices adopted, the periods and areas to which regulations apply, definitions of measurement conditions and ways in which noise levels are calculated make it difficult to compare the current advanced countries standards. This study presents the current noise abatement policy of the advanced countries and proposes the improvement of the current noise abatement policy of Korea to catch up with it of the advanced countries.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.05a
• /
• pp.338-341
• /
• 2005

This paper proposes a control system for a Galvano meter which can be used in angle multiplexing for a holographic data storage. Due to the small angle multiplexing selectivity and the exposure/delay time of a CCD camera, the system needs to be controlled to satisfy the performance specification. First, the mathematical model is derived by combining the electrical and mechanical dynamic equations. Then, the obtained model was tuned by the experiments. Finally, a PID controller using DSP was designed and was applied the holographic system. From this approach, we successfully meet the performance specification.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.05a
• /
• pp.900-904
• /
• 2005

Studies of community annoyance caused by civil aircraft noise exposure were carried out in fifteen areas near Gimpo and Gimhae international airports, Korea, to accumulate social survey data in Korea and to assess the relationship between aircraft noise level and degree of annoyance. Aircraft noise levels were measured automatically by airport noise monitoring system, B&K type 3597. A social survey was carried out people living within In meters of noise measurement points, as a rule. Questionnaires were only aggregated face-to-face interviews using various questions which concerned with demographic, degree of noise annoyance, interference with daily activities and health-related symptoms. The questions of noise annoyance were answered on an 11-point numerical scale. The respondents, from 18 to 70 years of age, were randomly selected and completed the questionnaire themselves. The total number of respondents for the questionnaires was 554.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2014.04a
• /
• pp.487-490
• /
• 2014

These Days a lot of Noise Complaints in vicinity of Railway has been more increase than before. Almost 1/3 Residences who lives in Railway side are Exposure to Noise Pollution. Since the Apartment Buildings around Railway are getting more higher, so those of the Noise Barrier are not best solution anymore. We are going to make a New Plane with the state of the art technology for Railway Noise Abatement Control. Our Goal are focus on a development of Light Weight Noise Tunnel designed by new absorption mat'l and tunnel Stucture on the Overbridge and Viaduct of existing Railway. New Noise Tunnel will be reducing their weight more than 30% against Road Traffic One and also 10dB(A) Noise Reduction against Noise Barrier.

• Journal of Biosystems Engineering
• /
• v.18 no.3
• /
• pp.191-198
• /
• 1993

Vertical and horizontal ride vibrations of the selected agricultural tractors were measured and evaluated with respect to the ISO 2631 'guide for the evaluation of human exposure to whole body vibration'. Evaluation showed that at the normal transportation speeds of 1.4~20km/h on both the concret and ground surfaces tractor drivers were exposed to the vibrations whose magnitudes exceed the 8 hour fatigue decreased proficiency boundary in the frequency ranges of 2~16Hz in vertical and 1~2Hz in horizontal directions. Considering that tractor operation becomes as one of the specialized job for the future farming in Korea, measures must be made to protect the drivers against harmful ride vibrations of agricultural tractors.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2008.04a
• /
• pp.264-267
• /
• 2008

Relationship between exposure to combined noise sources and community annoyance have been investigated. Social surveys were conducted in urban spaces near the construction site with road traffics. The question relating to noise annoyance was answered on an 11-point numerical scale and 5-point verbal scale according to ISO 15666. The questionnaire also contained demographic factors, interference with daily activities, health-related symptoms, and noise sensitivity. Noise levels were measured in terms of A-weighted equivalent level ($L_{Aeq}$), and noise mapping technique was applied to predict the noise levels of urban spaces. Synthesis curves for the relationship between noise levels and percentage highly annoyed for combined noise sources were derived, and compared to the curves from a single noise source.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.15 no.7 s.100
• /
• pp.859-864
• /
• 2005

Noise map is a presentation of existing data or predicted noise situation in terms of noise indicator. However, it has shortcoming for assessing the number of people exposed, or the number of dwellings affected to any relevant limit values of noise level in certain areas. In this study, so called over-ride value noise mapping is Proposed to make up for the shortcoming by using over-ride function of object-oriented programming and it is to show the guard of the area where it is satisfied the standard of option, or it is not satisfactory. Over-ride value noise map data is combined with topography layer, population and house statistics, and GIS space statistical analysis. The over-ride value noise mapping can also be applied to make the road traffic noise map, the railroad noise map, the aircraft noise map, and the industrial site noise map. This can express noise damage information more exactly.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.05a
• /
• pp.366-371
• /
• 2004

For the reduction and efficient management of railway noise, first of all prediction of railway noise is necessarily requisted. At home and abroad many studies for prediction of raiiway nearby noise have been accomplished. But it is impossible to predict easily and exactly for the Korean Railway, because the acoustic powers for each rolling stock operated in Korea have not been built yet. So in this study, prediction model equation for environmental noise for Korean rolling stock Mugungwha was suggested using SEL of engine and rolling noise component separately. In this prediction model, the number of car, distance from the rail can be considered. Finally for the validation of prediction nlodel equation, the predicted Leq was compared to the measured Leq.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2010.05a
• /
• pp.44-44
• /
• 2010

In this presentation, noise control materials will be discussed from several points-of-view. First, materials will be categorized in terms of their intended function: i.e., as dissipative materials, as barriers, and as media intended to modify some aspect of the sound field. Within each category, example implementations will be described as will modeling procedures. In the context of barrier materials, recent developments in the area of metamaterials will be described briefly, and problems with some recently suggested approaches will be highlighted. Acoustical cloaking will be described as a method of modifying a sound field in such a way that a sensitive area is shielded from noise exposure; the practical difficulties of this approach will also be described. Finally, within each category of material and approach, a series of suggested research challenges will be described.