• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 추계학술대회 논문집
• /
• pp.516-521
• /
• 2004

TEEE(Thermoplastic ether-ester elastomer) is expected to reduce the noise and vibration from railway because its unique properties such as porosity. in this study, after building TEEE rail pad at established rail, we conducted practical test and vibration test to inquire the field application and endurance of TEEE material. The test results showed that TEEE material was lower vibration than EVA material, therefore, TEEE material was effective from a vibration reduction point of view.

• 자동차안전학회지
• /
• 제11권4호
• /
• pp.22-27
• /
• 2019

In this paper, the vibration load and analysis results for automotive battery supporter were performed to provide efficient vibration tolerance performance prediction methods for single-product vibration tolerance testing, and the major influencing factors and considerations for setting up single-unit vibration tolerance tests were reviewed. A common applicable standard load was applied to efficiently predict the performance of single-unit vibrations through the frequency response analysis technique. The results similar to test results can be predicted by checking vulnerable parts of the vehicle components for vibration loads and applying scale factor to standard loads. In addition, it was confirmed that the test conditions with a frequency generating the same durability severity as the endurance test are needed for accurate prediction of the durability of the single-unit vibration tolerance test conditions, and the acceleration and frequency with the conditions that there is no significant nonlinear phenomena in the vibration system are established during the single-unit vibration tolerance test conditions.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2009년도 춘계학술대회 논문집
• /
• pp.614-615
• /
• 2009

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2013년도 춘계학술대회 논문집
• /
• pp.628-629
• /
• 2013

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제6권1호
• /
• pp.27-36
• /
• 2006

It is increasingly important to ensure that a given vibration test specification of a particular machinery component is appropriately established by considering its real environmental conditions. Vibration test standards for electrical components are well documented, for example in an IEC 60068 series, while standards for machinery components are rarely found except a few military standards. Thus many vibration tests are performed based on the military standards. However, a test based on these military standards often results in over-testing, and under-testing in some cases due to the different environmental conditions. Also, these standards require an appropriate tailoring that may not be easily accomplished. In this paper, various international and military standards are compared and investigated to obtain test specifications relevant for machinery components. Also appropriate tailoring methods are demonstrated through a case study.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2010년도 추계학술대회 논문집
• /
• pp.521-522
• /
• 2010

• PNF and Movement
• /
• 제15권2호
• /
• pp.185-194
• /
• 2017

Purpose: The purpose of this study was to prove the effects of the PNF patterns combined with whole-body vibration (PWBV) training on muscle strength, balance, walking speed, and endurance in stroke patients. Methods: Sixteen subjects were randomly assigned to the PWBV group (n=8) and the whole-body vibration (WBV) group (n=8). The PWBV group performed PNF pattern exercises using sprinter combined with WBV, while the WBV group performed using squatting for 30 minutes. Both groups performed therapeutic interventions five days per week over a period of four weeks. The manual muscle test, timed up and go test (TUG), 10-meter walk test (10MWT), and six-minute walk test (6MWT) were used to assess the muscle strength, balance, and gait of the participants. The SPSS Ver. 19.0 statistical program was used for data processing. Statistical analysis included a pared t-test to compare the pre- and post-intervention, and an independent t-test was used to compare groups. The significance level was set as 0.05. Results: The PWBV group and WBV group showed significant improvements in the TUG, 10MWT, and 6MWT (P<0.05). Significant differences between the PWBV and WBV groups were found (P<0.05). Conclusion: The PWBV improved muscle strength, balance, gait speed, and endurance in stroke patients. Thus, PWBV may be suggested as a therapeutic intervention in patients with stroke hemiplegia.

• 대한토목학회논문집
• /
• 제29권4D호
• /
• pp.483-489
• /
• 2009

진동 소음을 저감시키는 Fe-Mn 제진 금속을 이용하여 제작된 핑거형 신축이음장치의 피로 내구성을 평가하고자 유한 요소해석과 수직하중 피로시험을 실시하였다. 피로실험은 Fe-Mn 제진금속을 이용한 신축이음장치와 유압가력기(25tonf)를 사용하여 진행되었으며, 그 결과에 따르면 핑거형 신축이음장치에 수직하중을 인가하였을 경우 핑거에서 측정된 최대 응력은 237.6MPa 이며, 이는 제진 금속의 항복강도인 420MPa의 56.6%이였다. 제진 금속을 이용한 신축이음의 피로시험은 도로교 설계기준에 따라 재하위치(KS F 4425)와 재하판($57.7cm{\times}23.1cm$)의 크기가 설정되었고, 그에 따른 200만회 수직하중 피로 시험에 있어서 파괴거동을 나타내지 않았으며 그 내구성과 안전성을 확인하였다.

• 한국정밀공학회지
• /
• 제24권1호
• /
• pp.37-46
• /
• 2007

The vibration environment essentially companied by vehicle operation on the ground is determined by the shape of road surface, which is called profile. This paper focuses on development of a profile and severity measurement system for unpaved test courses. In general, the profile and severity of unpaved road is an important issue in the reliability of endurance test. In order to measure unpaved road profile and severity, it is necessary to develop a profilometer system. The developed profilometer system is composed of data processing computer, power unit, air compressor and sensors(encoder, vertical gyro and laser displacement) This paper presents the measuring system configuration, measurement principle of road profile and analysis method of road characteristics used at CPG(Changwon Proving Ground) for this purpose.

• 한국소음진동공학회논문집
• /
• 제25권12호
• /
• pp.807-814
• /
• 2015

A control rod drive mechanism(CRDM) is a reactor regulating system, which inserts, withdraws or maintains a control rod containing a neutron absorbing material within a reactor core to control the reactivity of the core. The top-mounted CRDM for Jordan Research and Training Reactor(JRTR) with 5 MW power has been designed and fabricated based on the HANARO's experience through KAERI and DAEWOO consortium project. This paper describes the performance qualification test results to demonstrate the operability of a prototype and four production CRDMs during the reactor lifetime. The driving performance, the drop performance and the endurance tests for CRDM are carried out at a test rig simulating the actual reactor conditions. A vibration of internal components due to the coolant flow is also measured using a laser vibrometer. As a result, the CRDMs are driven having a good driving performance without a malfunction between command and output signals for the stepping motor. Also, the pure drop time and the impact acceleration are within 0.72 s and 4.2 g to meet the design requirements, and the vibrational displacement of control rod is measured as maximum $5.2{\mu}m$.