• 해양환경안전학회지
• /
• 제27권6호
• /
• pp.832-838
• /
• 2021

본 연구는 최근 해양사고가 점차 증가하고 있는 10톤 미만 소형어선의 규칙파 중 운동응답 특성에 대하여 수치해석을 통하여 분석하였다. 10톤 미만의 소형선박들을 크기별로 구분하여 해양사고 분석에 이용되고 있기 때문에 본 연구에서도 서로 다른 크기의 소형어선 3척을 대상으로 운동응답 해석을 이행하였다. 선수파인 경우 장파장 영역에서 속력이 높아질수록 상하동요 및 종동요 응답도 커지고 있는 현상을 확인하였다. 가장 작은 3톤급 어선의 운동응답이 다른 크기의 어선보다 더 크게 나타나는 특성을 보여주었다. 선수사파 상태에서의 횡동요 운동은, 선박의 크기와 관계없이 점차 속력이 높아질수록 운동응답의 최대값이 장파장 영역으로 이동되는 특성을 확인할 수 있었다. 선수사파와 횡파에서 3척의 소형어선 모두 속력이 가장 높은 15노트에서 횡동요 운동이 가장 크게 나타나는 것을 알 수 있었다. 선수파 및 선수사파를 받으면서 항행할 경우 속력을 낮추는 것이 종운동과 횡운동 영향을 감소시킬수 있는 방법이라고 보여진다. 횡파에 의한 횡동요는 속력 및 선박의 크기와 관계없이 특정 파장에서만 급격히 커지는 경향을 보여 주었다. 전진속력이 있을 경우 선수 사파에 비해서 선미사파에서의 확연한 횡동요 감소 현상을 확인할 수 있었다. 선박의 크기 및 속력에 따라 선체운동응답의 최대값이 나타나는 특정 영역이 있으므로 이 운동 영향을 최소화 시킬 수 있는 운항방법이 고려되어 실행되어야 한다.

• 해양환경안전학회지
• /
• 제25권3호
• /
• pp.366-372
• /
• 2019

This study performed a numerical analysis of a 3D unsteady viscous flow in order to investigate ship motion responses running through regular waves of the platform supply vessel. The feasibility of numerical analysis was tested under the three regular wave conditions of the KRISO container ship (KCS) suggested at the 2010 Gothenburg CFD Workshop. The resulting resistance coefficient, heave motion, and pitch angle were compared with the model test of the harmonic analysis. Also, the ship motion response characteristics of the platform supply vessel were performed using the proven method of the KRISO container ship (KCS). The ship motions including the resistance coefficient, heave motion, and pitch angle according to the time series were investigated via harmonic analysis under regular waves condition of ${\lambda}/LPP=1.87$ and $H_S=0.078m$.

• 수산해양교육연구
• /
• 제21권1호
• /
• pp.68-77
• /
• 2009

In this study it will be discussed how to solve the problem of discomfort from rolling motion on the small fishing boats. Up to now, the equipments of reducing rolling system can be examined by various case, but difficult to apply small vessel by function, space and costly establishment. A way of improving the feeling of getting on a boat through the equipped sail at stern edge of bulwark top was researched and developed. The author has tested the sailing performance of the experimental skiff boat, from the signals obtained by the inclinometer in irregular waves and compared with the results got in sail on and off mode operation for 10 minutes duration at the conditions of stop and underway. These data has been analyzed in the application statistical methods. Eventually we summarize the analyzed results obtained from the vessel while stationary and underway for two cases, the vessel with a sail and the vessel without a sail. The field test was done in Jeju outer harbor. The ratio of the motion responses at resonance for the sail with and without cases indicate that under given conditions the motion was reduced by the efficiency of diminution is 4.726%, 2.792% in the stopping and 11.663%, 3.282% in the underway and mean rolling periods are 2.158, 2.142, 2.421, 2.412sec. and 1.968, 1.963, 2.089, 2.051sec. respectively. Consequently the efficiency of diminution was higher when the ship is underway and rolling periods got longer in the equipped sail.

• 한국해양공학회지
• /
• 제25권4호
• /
• pp.7-11
• /
• 2011

The installation phase for a topside module suggested can be divided into 9 stages, which include start, pre-lifting, lifting, lifted, rotating, positioning, lowering, mating, and end of installation. The transfer of the topside module from a transport barge to a crane vessel takes place in the first three stages, from start to lifting, while the transfer of the module onto a floating spar hull occurs in the last three stages, from lowering to the end. The coupled multi-body motions are calculated in both calm water and in irregular waves with significant wave height (1.52m), with suggested force equilibrium diagrams. The effects of the hydrodynamic interactions between the crane vessel and barge during the lifting stage have been considered. The internal forces caused by the load transfer and ballasting are derived for the lifting phases. The results of these internal forces for the calm water condition are compared with those in the irregular sea condition. Although the effect of pitch motion on the relative vertical motion between the deck of the floating structure and the topside module is significant in the lifting phases, the internal force induced pitch motion is too small to show its influence. However, the effect of the internal force on the wave-induced heave responses in the lifting phases is noticeable in the irregular sea condition because the transfer mass-induced draught changes in the floating structure are observed to have higher amplitudes than the external force induced responses.

• Journal of Multimedia Information System
• /
• 제7권4호
• /
• pp.269-276
• /
• 2020

The small craft including jet-board for leisure are commonly smaller than the general commercial vessels. For the floating vessel, the motion analysis is significantly important component to design the shape. It is, however, hardly predicting its behavior by using conventional boundary element method due to violating small amplitude assumption for potential theory. The computational fluid dynamics method can afford to simulate such small craft, but its grid system was not able to calculate motion, because movable body disturbs the grid system by confliction. The dynamics fluid body interaction model with over-set mesh system can be dealt with movable floating body under irregular ocean wave. In this study, several cases were considered to reveal that DFBI is essential method to predict floating body motion. The single phase simulate was conducted to establish the shape perfection, and then the validated vessel was simulated with ocean waves weather DFBI option on or off. Through the comparison, the results between the cases of DFBI on and off shows significantly difference. It was claimed that the DFBI was necessary not only to calculation body motion, but also to predict accurate drag and lift force on the floating body for small size craft.

• 해양환경안전학회:학술대회논문집
• /
• 해양환경안전학회 2003년도 추계학술발표회
• /
• pp.123-126
• /
• 2003

In the present paper, the analysis is on the safe navigation between ships moving each other in restricted waterways under the external force, such as wind or current The numerical simulation of manoeuvring motion was carried out to propose an appropriate safe speed and distance between ships, which is required to avoid marine disasters from the viewpoint of marine safety. From the inspection q this investigation, it indicates the following result In case of proximal navigation between ships under the wind and current, the low-speed vessel is potentially hazardous because the rudder force if low-speed vessel needed for steady-state course-keeping is not sufficient, compared to the high-speed vessel The manoeuvring characteristic based on this investigation will be very useful for keeping the safety of navigation from the practical point of ships design and traffic control in restricted waterways.

• 한국해양공학회지
• /
• 제16권6호
• /
• pp.71-75
• /
• 2002

In this paper, a study on the principal performance of the purse seiner ship in two vessel formations was conducted. For this task, the outline of the purse seiner fishing system in two vessel formations was reviewed. At the same time, based on the general arrangement plan, hull from of the main vessel was developed. And the stability and ship motion characteristics of the ship design were estimated. Finally, to verify the characteristics of the resistance and self-propulsion coefficient, a model test in a circulating water channel was performed. As n result, it is anticipated that this presentation will be used as the foundation material for research of purse seiner.

• 한국해양공학회지
• /
• 제33권5호
• /
• pp.462-469
• /
• 2019

In this study, a motion control problem for the vessels towed by tugboats or towing ships on the sea is considered. The towed vessels, such as barge ships, are used for several purposes. Generally, these vessels have no power propulsion system and are towed using ropes and towing vessel (tugboats). The basic mathematical model of the towed vessel in which three active rudders are attached was introduced from a previous study. Owing to the dependency of the motions of the towed vessel to the towing ship, a method is suggested to cope with the undesirable disturbance and improve the tracking performance. For the simulation study, a model of the towed vessel with a towing ship is made, and necessary physical parameters are identified from the experiment. For the defined and linearized model, a control system is designed, and the control performance is also evaluated. A simulation study is conducted and the effectiveness of the proposed control strategy is verified.

• Ocean Systems Engineering
• /
• 제10권3호
• /
• pp.333-357
• /
• 2020

International Maritime Organisation (IMO) regulations insist on reduced emission of CO₂, noxious and other environmentally dangerous gases from ship, which are usually let out while burning fossil fuel for running its propulsive machinery. Contrallability of ship during sailing has a direct implication on its course keeping and changing ability, and tries to have an optimised routing. Bad coursekeeping ability of a ship may lead to frequent use of rudder and resulting changes in the ship's drift angle. Consequently, it increases vessels resistance and also may lead to longer path for its journey due to zigzag movements. These adverse effects on the ship journey obviously lead to the increase in fuel consumption and higher emission. Hence, IMO has made it mandatory to evaluate the manoeuvring qualities of a ship at the designed stage itself. In this paper a numerical horizontal planar motion mechanism is simulated in CFD environment and from the force history, the hydrodynamic derivatives appearing in the manoeuvring equation of motion of a ship are estimated. These derivatives along with propeller thrust and rudder effects are used to simulate different standard manoeuvres of the vessel and check its parameters against the IMO requirements. The present study also simulates these manoeuvres by using numerical free running model for the same ship. The results obtained from both these studies are presented and discussed here.

• 대한조선학회논문집
• /
• 제48권2호
• /
• pp.183-187
• /
• 2011

As larger the commercial vessel is, and rougher the marine environment becomes nowadays, drag embedment type anchor (DEA) of more stable performance and higher holding power is requested to be applied on the vessel. But, the performance of DEA has not become well known to academy and industries so far, that the basic study of DEA performance and holding force for the development of new DEA of higher performance is insufficient that required. In this paper, three types of same holding category DEA model (HALL, AC-14, POOL-N, scale 1/10), which are generally applied on the commercial vessel nowadays, were tested by being horizontally dragged on the test tank, on which sand was being floored with sufficient depth, and measured the holding force of each anchor simultaneously using load cell and D/A converter. With the test results, the embedding motion was analyzed to have three different stages and the holding force of each anchor was analyzed with respect to the anchor geometry, such as shape and weight of each type of anchors, and final embedding depth.