• Journal of the Korean Society of Marine Environment & Safety
• /
• v.29 no.7
• /
• pp.887-892
• /
• 2023

Vessel traffic service(VTS) centers are equipped with RADAR, AIS(Automatic Identification System), weather sensors, and VHF(Very High Frequency). VTS operators use this equipment to observe the movement of ships operating in the VTS area and provide information. The VTS data generated by these various devices is highly valuable for analyzing maritime traffic situation. However, owing to a lack of compatibility between system manufacturers or policy issues, they are often not systematically managed. Therefore, we developed the VTS Bigdata Platform that could efficiently collect, store, and manage control data collected by the VTS, and this paper describes its design and implementation. A microservice architecture was applied to secure operational stability that was one of the important issues in the development of the platform. In addition, the performance of the platform could be improved by dualizing the storage for real-time navigation information. The implemented system was tested using real maritime data to check its performance, identify additional improvements, and consider its feasibility in a real VTS environment.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.5B
• /
• pp.517-529
• /
• 2011

In this paper, the parameters of the RTT (Radio Transmission Techniques) for SANET (Ship Ad-hoc NETwork), which is considered for the next generation maritime communication systems, are set up. A channel model has been analyzed based on the practical measured maritime wireless channel in VHF (Very-High Frequency) for SANET system. Also, by considering the frame structure including preamble, guard time and pilots for both single and multi-carrier systems, the BER (Bit Error Rate) performances are evaluated and analyzed in the aspects of channel compensation and channel coding techniques. Based on the simulation results, optimal modulation & coding schemes are suggested for SANET. That is, in single-carrier system by using differential modulation schemes, channel compensation is not necessary. However, channel coding is helpful to achieve additional gain. On the other hand, when 16-QAM modulation is employed in multi-carrier system, the implementation of both channel compensation and channel coding techniques show huge performance gain for various of K values, which are related to different maritime environments, and the rolling effects of wave.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.459-459
• /
• 2007

VHF ICP (Very High Frequency Inductively Coupled Plasma) 반응기에서 반응기 압력, 수증기 유량, 플라즈마 출력, 반응기온도 등의 공정변수에 따른 수증기 분해특성과 수소생성거동을 실험하였다. 플라즈마 분해 특성은 OES(Optical Emission Spectroscopy)를 사용하여 분석하였으며, QMS(Quadrapole Mass Spectroscopy)를 이용하여 배기가스 성분을 분석하여, 수증기 분해거동 및 수소생성 효율을 조사하였다. 본 연구실에서 설계한 초고주파 유도결합 플라즈마는 고밀도 플라즈마 생성과 낮은 압력에서도 안정된 플라즈마 발생 특징을 나타내었다. 플라즈마 출력의 증가에 따른 수증기의 분해와 수소생성 거동은 개시영역, 선형증가영역, 포화영역의 세 영역으로 구분되는 특징을 나타내었다. 유량 및 압력의 증가에 따라 포화에 필요한 플라즈마의 출력이 증가되는 경향을 나타내었다. 본 실험의 온도범위에서는 온도 증가에 따른 수증기 분해 및 수소생성 증가효과는 플라즈마 출력의 영향에 비하여 매우 미미한 정도로 플라즈마의 높은 에너지 전달효과를 확인할 수 있었다. 따라서, 낮은 반응기 온도에서도, 유량 및 압력에 따른 포화 플라즈마조건을 설정할 경우, 높은 에너지 효율의 수소 제조가 가능함을 알 수 있었으며, 물분해 플라즈마를 이용한 저온 산화물 박막증착에의 적용도 기대된다.

• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.311-314
• /
• 2004

A new type of high frequency wideband ultrasonic transducer with a separation between a transmitter and a receiver was proposed and its characteristics were simulated using the PSpice model. The piezoelectric ceramic $PbTiO_{3}$ as a transmitter and the piezoelectric copolymer P(VDF-TrFE) as a receiver were used for high sensitivity and wide bandwidth, respectively. The characteristics of a center frequency approximately 40MHz focusing transducer fabricated in this study showed very wide bandwidth which could give an axial spatial resolution better than 30um in the B-mode image for biological tissues.

• Information and Communications Magazine
• /
• v.30 no.1
• /
• pp.47-57
• /
• 2012

본고에서는 DTV (Digital Television) 서비스로의 전환으로 사용 가능한 TV 화이트 스페이스 (TV White Space; TVWS)의 무선통신 기술규격과 위치정보 기반 TVWS DB (Geo-location based TVWS Database)에 대해 전반적인 내용을 소개하였다. 위치정보 기반 TVWS DB는 TVWS가 존재하는 VHF (Very High Frequency)와 UHF (Ultra High Frequency) 대역에서의 1차 우선 보호 서비스인 지상파 방송 서비스와 소출력 방송 중계기, 무선 마이크에 대한 간섭보호를 보증하며, TVWS를 활용하는 TVBD (TV Band Device)의 위치정보를 기반으로 허용가능 전송전력 및 TVWS 채널할당과 같은 핵심 역할을 수행한다. 본 고에서는 이와 함께 위치정보 기반 TVWS DB에 대한 국내외 연구개발 동향 및 시범 서비스 현황에 대해서도 소개하고자 한다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.478-478
• /
• 2012

Recently, there are many researches in order to increase the deposition rate (D/R) and improve film uniformity and quality in the deposition of microcrystalline silicon thin film. These two factors are the most important issues in the fabrication of the thin film solar cell, and for the purpose of that, several process conditions, including the large area electrode (more than 1.1 X 1.3 (m2)), higher pressure (1 ~ 10 (Torr)), and very high frequency regime (VHF, 40 ~ 100 (MHz)), have been needed. But, in the case of large-area capacitively coupled discharges (CCP) driven at frequencies higher than the usual RF (13.56 (MHz)) frequency, the standing wave and skin effects should be the critical problems for obtaining the good plasma uniformity, and the ion damage on the thin film layer due to the high voltage between the substrate and the bulk plasma might cause the defects which degrade the film quality. In this study, we will propose the new concept of the large-area multi-electrode (a new multi-electrode concept for the large-area plasma source), which consists of a series of electrodes and grounds arranged by turns. The experimental results with this new electrode showed the processing performances of high D/R (1 ~ 2 (nm/sec)), controllable crystallinity (~70% and controllable), and good uniformity (less than 10%) at the conditions of the relatively high frequency of 40 MHz in the large-area electrode of 280 X 540 mm2. And, we also observed the SEM images of the deposited thin film at the conditions of peeling, normal microcrystalline, and powder formation, and discussed the mechanisms of the crystal formation and voids generation in the film in order to try the enhancement of the film quality compared to the cases of normal VHF capacitive discharges. Also, we will discuss the relation between the processing parameters (including gap length between electrode and substrate, operating pressure) and the processing results (D/R and crystallinity) with the process condition map for ${\mu}c$-Si:H formation at a fixed input power and gas flow rate. Finally, we will discuss the potential of the multi-electrode of the 3.5G-class large-area plasma processing (650 X 550 (mm2) to the possibility of the expansion of the new electrode concept to 8G class large-area plasma processing and the additional issues in order to improve the process efficiency.

• Journal of Advanced Navigation Technology
• /
• v.12 no.1
• /
• pp.1-7
• /
• 2008

International Civil Aviation Organization(ICAO) adopted VOR(Very high frequency Omni-Range) as an international standard air navigation system in 1949 and recommended every country to make use of it in formulating air route and guiding take-off and landing of an aircraft. VOR is quite a useful navigation system so that more than 2,000 VORs have been installed all over the world including 39 in Korea: however, VOR signal could be easily affected by its circumstance like a mountainous area because it provides navigation information through AM and FM of VHF carrier. Therefore this study intends to investigate how much VOR performance is affected by its circumstances. For this purpose, the performance of the 10 VORs influenced by 24 obstacles are measured and analyzed by using an aircraft equipped with measuring instruments. This study may give us a feasible solution of problems related to the VOR siting in the future.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.11A
• /
• pp.1206-1212
• /
• 2007

International Civil Aviation Organization(ICAO) adopted VOR(Very high frequency Omni-Range) as an international standard air navigation system in 1949 and recommended every country to make use of it in formulating air route and guiding take-off and landing of an aircraft. VOR is quite a useful navigation system so that more than 2,000 VORs are currently installed all over the world including 39 in the Republic of Korea; however, VOR signal could be easily affected by its circumstance like a mountainous area because it provides navigation information to an aircraft through AM and FM of VHF carrier. There are two types of VOR which are defined according to a design methode. Therefore this study intends to investigate which type of VOR is suitable for mountainous area. For that purpose, the performance of each CVOR and DVOR is measured and analyzed by using an aircraft equipped with measuring instruments. The analyzed result will be applied and utilized in selecting the VOR type, so it could be a feasible solution of problem related to the VOR relocation due to its insufficient performance in the future.

• Journal of Advanced Navigation Technology
• /
• v.26 no.5
• /
• pp.358-364
• /
• 2022

The Inter Communication System for avionics is in charge of processing all voice signals that internal calls between Pilot and Co-pilot, internal calls between Pilots and Crews, external calls through communication equipment such as Ultra/Very High Frequency Receiver/Transmitter(U/VHF RT), audio signal monitoring for navigation and mission equipment such as VHF Omnidirectional Range/Instrument Landing System(VOR/ILS), Tactical Air Navigation(TACAN), audio signal output for voice recording to Flight Data Recorder(FDR) and Data Transfer System(DTS), and warning/caution audio signal generate about the status and threat of aircraft. Because Inter Communication System for avionics is sensitive to noise in the case of analog audio signals, a redundant design that can protect audio signal from electromagnetic noise inside/outside of aircraft is required for the mission of pilots and crews. In this paper, Normal/Back-up operation mode and redundancy design plan based on digital method for the redundancy of the digital Inter Communication System for avionics and manufacturing, verification results are described.

• Journal of the Semiconductor & Display Technology
• /
• v.20 no.4
• /
• pp.72-77
• /
• 2021

The radial distribution of etch rate was analyzed using the ion energy flux model in VHF-CCP. In order to exclude the effects of polymer passivation and F radical depletion on the etching. The experiment was performed in Ar/SF6 plasma with an SF6 molar ratio of 80% of operating pressure 10 and 20 mTorr. The radial distribution of Ar/SF6 plasma was diagnosed with RF compensated Langmuir Probe(cLP) and Retarding Field Energy Analyzer(RFEA). The radial distribution of ion energy flux was calculated with Bohm current times the sheath voltage which is determined by the potential difference between the plasma space potential (measured by cLP) and the surface floating potential (by RFEA). To analyze the etch rate uniformity, Si coupon samples were etched under the same condition. The ion energy flux and the etch rate show a close correlation of more than 0.94 of R² value. It means that the etch rate distribution is explained by the ion energy flux.