• 마이크로전자및패키징학회지
• /
• 제11권3호
• /
• pp.91-97
• /
• 2004

PZT 박막을 rf-마그네트론 스퍼터링으로 $Pt/Ti/SiO_2/Si$ 기판 위에 형성시켰다. $5\%$ 과잉 PbO 를 포함한 bulk PZT 타겟을 사용하였다. 상온에서 PZT 박막을 얇게 입힌 후 나머지 두께를 $650^{\circ}C$에서 in-situ 방법으로 형성시켰다. 강유전 특성을 갖는 PZT 상은 $650^{\circ}C$에서 형성되었다. 2단계 스퍼터링에 의해 누설전류 특성을 크게 증진시킬 수 있었고, 적절한 두께의 상온층을 포함시킨 경우 $2{\times}10^{-7}A/cm^2$의 매우 작은 누설전류를 나타냈다. 누설전류 기구에 대한 조사 결과, 여러 조건에서 제조된 PZT 박막의 전기전도는 모두 bulk-limit 기구에 의한 것임을 알 수 있었다.

• 천문학회지
• /
• 제36권1호
• /
• pp.1-12
• /
• 2003

Nonthermal particles can be produced due to incomplete thermalization at collisionless shocks and further accelerated to very high energies via diffusive shock acceleration. In a previous study we explored the cosmic ray (CR) acceleration at cosmic shocks through numerical simulations of CR modified, quasi-parallel shocks in 1D plane-parallel geometry with the physical parameters relevant for the shocks emerging in the large scale structure formation of the universe (Kang & Jones 2002). Specifically we considered pancake shocks driven by accretion flows with $U_o = 1500 km\;s^{-l}$ and the preshock gas temperature of $T_o = 10^4 - 10^8K$. In order to consider the CR acceleration at shocks with a broader range of physical properties, in this contribution we present additional simulations with accretion flows with $U_o = 75 - 1500 km\;s^{-l}$ and $T_o = 10^4K$. We also compare the new simulation results with those reported in the previous study. For a given Mach number, shocks with higher speeds accelerate CRs faster with a greater number of particles, since the acceleration time scale is $t_{acc}\;{\propto}\;U_o^{-2}$. However, two shocks with a same Mach number but with different shock speeds evolve qualitatively similarly when the results are presented in terms of diffusion length and time scales. Therefore, the time asymptotic value for the fraction of shock kinetic energy transferred to CRs is mainly controlled by shock Mach number rather than shock speed. Although the CR acceleration efficiency depends weakly on a well-constrained injection parameter, $\epsilon$, and on shock speed for low shock Mach numbers, the dependence disappears for high shock Mach numbers. We present the 'CR energy ratio', ${\phi}(M_s)$, for a wide range of shock parameters and for $\epsilon$ = 0.2 - 0.3 at terminal time of our simulations. We suggest that these values can be considered as time-asymptotic values for the CR acceleration efficiency, since the time-dependent evolution of CR modified shocks has become approximately self-similar before the terminal time.

• 한국세라믹학회지
• /
• 제50권2호
• /
• pp.157-162
• /
• 2013

The need for lead-free piezoceramics has caused a renewal of interest in $BaTiO_3$-based systems. Recently, it was found that ceramics in the $(Ba,Ca)(Zr,Ti)O_3$ system have properties comparable to those of $Pb(Zr,Ti)O_3$. However, these ceramics require rather high sintering temperatures of $1450-1550^{\circ}C$. In this work, the effect of $TiO_2$ and CuO addition on the sintering behavior, microstructure, dielectric and piezoelectric properties of $(Ba_{0.85}Ca_{0.15})(Zr_{0.1}Ti_{0.9})O_3$ (BCTZ) ceramics will be discussed. BCTZ ceramics were prepared by the mixed oxide route and 1 mol % of $TiO_2$ or CuO was added. Undoped and doped ceramics were sintered at $1350^{\circ}C$ for 1-5 h. CuO was found to be a very effective sintering aid, with samples sintered for 1 h at $1350^{\circ}C$ having a bulk density of 95% theoretical density; however the piezoelectric properties were greatly reduced, probably due to the small grain size.

• 한국수소및신에너지학회논문집
• /
• 제17권4호
• /
• pp.389-394
• /
• 2006

Mg and Mg-based alloys are promising hydrogen storage alloys for renewable clean energy applications. It is a lightweight and low cost material with high hydrogen storage capacity. However, commercial applications of the Mg hydride are currently hindered by its high absorption/desorption temperature, and very slow reaction kinetics. In this work, we aim to study the absorption properties of the $Mg_2Ni$-5mass% Nb composite prepared by mechanical alloying under hydrogen. The absorption capacity of the sample is found to be about 3.0 wt.% at T=573 K and P=1.0 MPa. The absorption characteristics observed have been compared with those of the prepared $Mg_2Ni$.

• 한국식품과학회지
• /
• 제20권6호
• /
• pp.794-800
• /
• 1988

재래 찰벼 신선찰벼와 다수계 찰벼. 통일찰벼 및 찰보리(수원 227호), 찰수수, 차조, 율무등의 전분을 분리하여 노화 특성에 관하여 글루코아밀라아제에 의한 노화도 측정법, X-선 회절법, ${\beta}-amylolysis$등으로 비교 측정한 결과는 다음과 같다. 첫번째, 6종의 찰 전분을 $0{\sim}5^{\circ}C$에서 20일, 30일 저장했을 때와 냉동, 해동 반복을 20회, 30회 했을 때 노화 속도가 대단히 느리다. 두번째, 노화가 잘되는 순서는 찰수수 > 찰보리 > 차조 > 율무 > 통일찰벼 > 신선찰벼의 순이었으며 찰수수와 찰보리는 다른 전분에 비하여 노화가 잘 되었다. 세번째, 노화를 촉진하는 인자로서 냉동, 해동 30회 반복은 $0{\sim}5^{\circ}C$ 냉장 30일과 비슷한 경향을 보였다. 마지막으로, 우리나라에서 단 하나의 장려 품종인 찰보리(수원 227호)는 보리 한알속에 메 전분 입자가 약15% 혼입되어 있으며 앞으로 찰보리 육종에 참고로 하였으면 한다.

• 한국초지조사료학회지
• /
• 제12권4호
• /
• pp.201-210
• /
• 1992

This study was designed to investigate the content of inorganic nitrogen($NH_4$, $NO_3$) and its change in the 7 different sites; the permanent meadows of alfalfa, orchardgrass, and reed canarygrass, the fields of rye. corn, rice and a mountain region. the results from this study were summarized as follows; 1. The contents of ammonium and nitrate in meadows were 15.89-16.46 and 1.32-1.86ppm, respectively, showing the lower level than in other sites and no significant diffirences among three meadows. 2. In the rice field, the average content of ammonium(7.19ppm) was the highest among all sites, but the content of nitrate(1 l.l7ppm) was the lowest. In addition, almost all of nitrate were spreaded around the surface. 3. In the mountain region, the content of $NH_4$(5.79ppm) was slightly high, but the content of nitrate ( 15.18ppm) was very low. 4. In the rye field. the average content of $NO_3$ was 35.46ppm and show the highest (92.63ppm) at the deep part of soil in the specific season, but it decreased with increasing temperature. 5. In the corn field, which kept bare after harvesting the corn silage, the content of $NO_3$ was high, regardless of seasons and depths, and increased up to maximum of 103ppm. 6. The ground water concentrations of $NO_3$ were not more than 50ppm in the pasture. In the vegetable house, they were less than 30 ppm during the winter and spring and were 80-100ppm during the summer and fall. 7. The concentrations of $NO_3$ in Han river water were lower during the winter and spring(20-30ppm) and higher dxring the summer and fall (50-90ppm).

• 펄프종이기술
• /
• 제30권4호
• /
• pp.18-27
• /
• 1998

Biopulping is defined as the treatment of wood chips with lignin-degrading fungi prior to pulping. Fungal pretreatment prior to mechanical pulping reduces electrical energy requirements during refining or increases mill throughput, improves paper strength, reduces the pitch content, and reduces the environmental impact of pulping. Our recent work involved scaling up the biopulping process towards the industrial level, investigating both the engineering and economic feasibility. We envision the process to be done in either a chip-pile or silo-based system for which several factors need to be considered: the degree of decontamination, a hospitable environment for the fungus, and the overall process economics. Currently, treatment of the chips with low-pressure steam is sufficient for decontamination and a simple, forced ventilation system maintains the proper temperature, humidity, and moisture conditions, thus promoting uniform growth of the fungus. The pilot-scale trial resulted in the successful treatment of 4 tons of wood chips (dry weight basis) with results comparable to those on a laboratory. Larger, 40-ton trials were also successful, with energy savings and paper properties comparable with the laboratory scale. The overall economics of the process also look very favorable and can result in significant annual savings to the mill. Although the current research has focused on biopulping for mechanical pulping, it is also beneficial for sulfite chemical pulping and some applications to recycled fiber have been investigated.

• 한국통신학회논문지
• /
• 제36권5B호
• /
• pp.573-581
• /
• 2011

수중채널은 매질에 의한 신호 감쇄로 인해 전송대역이 제한되며, 수온, 염도, 기하학적 구조 등 다양한 요소의 영향을 받기 때문에 복잡하며 신뢰성을 유지하기 어려운 통신 환경 중의 하나이다. 본 논문에서는 수중채널에 대한 분석을 토대로 보다 실질적인 모의 수중채널을 모델링하였다. 또한 ISI, 주파수 선택적 페이딩, 시간 선택적 페이딩을 동시에 고려한 Coded Orthogonal Frequency Division Multiplexing (OFDM) 시스템을 디자인하였으며 앞서 언급한 실질적인 표의 수중채널에 대한 시뮬레이션을 통하여 디자인된 시스템이 다양한 상태의 채널에서도 성능변화의 폭이 작고 견실하게 작동할 수 있음을 보였다. 제안하는 Coded OFDM 시스템은 Low Density Parity Check (LDPC) 코드를 사용했으며, Un-coded OFDM 시스템에 비해 $10^{-3}$ BER기점을 기준으로 7 dB의 이득이 발생하였다. 뿐만 아니라 채널의 변화에 따른 SNR 차가 8 dB에서 3 dB로 줄였다.

• 한국의류산업학회지
• /
• 제13권2호
• /
• pp.263-268
• /
• 2011

One-step reduction/dyeing method was applied for ramie dyeing with natural indigo powder. The effect of reduction/dyeing conditions including the pH of bath, dye temperature and time, and concentration of indigo powder and reduction agent on dye uptake and color properties were investigated. Regardless of addition of alkali, the dyed fabrics appeared in the PB Munsell color range(${\lambda}_{max}$: 660 nm) and the dye uptake was much higher with no addition of sodium hydroxide. Dyeing was carried out through the use of only sodium hydrosulfite in the bath. The maximum dye uptake was obtained at 60 for 30min. Saturated dye uptake was obtained at 2 g/L of sodium hydrosulfite concentration up to 2 g/ L of indigo powder. Whereas, at higher indigo powder concentration (4 g/L), more than 3 g/L of reducing agent concentration was required for obtaining the saturated dye uptake. Color reproducibility was reliable with color difference in the range of 0.03~0.16. Regardless of color strength, fastness to rubbing was acceptable with a 3/4~4/5. Fastness to washing, dry cleaning, and light of samples with low color strength were poor. Whereas, fastness to washing, dry cleaning, and light of samples with high color strength were very good.

• 한국전기전자재료학회논문지
• /
• 제23권11호
• /
• pp.854-858
• /
• 2010

In this study, we have investigated the effects of Cr dopant on the sintering and electrical properties of ZnO-$Sb_2O_3$ (ZS) ceramics for varistor application. Spinel phases including $\alpha-$ and $\beta$-type was formed at ZS system and $\alpha$-spinel was stabilized by Cr doping in ZS system. Densification of ZS and ZSCr system was retarded to $1000^{\circ}C$ by the formation of spinel at $800^{\circ}C$. The morphology and its distribution of spinel phases in ZS system was homogeneous but disturbed by Cr doping. In ZSCr the densification of ZnO compared with ZS system was more retarded by low concentration of Zn interstitial defects induced by Cr doping in addition to the effect of spinel phase formation. The defects in each system were identified as attractive coulombic center (ZS: 0.13 eV, ZSCr: 0.12 eV) and singly charged oxygen vacancy $V_0^{\cdot}$ (ZSCr: 0.33 eV). In all ZS and ZSCr system have week varistor behavior by the formation of double Schottky barrier at grain boundary but its stability of barrier was very sensitive to sintering temperature.