• Journal of Advanced Marine Engineering and Technology
• /
• v.29 no.4
• /
• pp.377-383
• /
• 2005

This paper deals with the flow characteristics of air-water two-phase flow in a vertical tube of 10mm I.D. and 600mm in length at an adiabatic condition. The obtained experimental data were covered with the liquid superficial velocity ranging from 0.095m/s to 2.56m/s. and the gas superficial velocity ranging from 0.032m/s to 21.08m/s. The effects of the gas and liquid superficial velocity on the flow pattern transitions, frictional pressure drop, and film thickness and gas-liquid interface roughness were also examined. It was found that the film thickness increased and the liquid film wave length was more longer with the liquid superficial velocity $j_L$ increasing at $j_G$ constant. It was also showed that the frictional pressure drops were experienced in three regions. namely increasing region(bubbly flow), decreasing region (Taylor bubble and slug flows) and re-increasing region (annular flow).

• Journal of Biomedical Engineering Research
• /
• v.4 no.1
• /
• pp.15-20
• /
• 1983

In this paper, the velocity characteristics of the vertical saccadic eye movement system with subject-experiment are investigated utilizing the infra-red methed. Especially, target-generation system which produces pseudo-random signals using EPROM 2716 and differentiator whose time constant is 12 msec are developed in hardware.

• Korean Journal of Applied Biomechanics
• /
• v.13 no.1
• /
• pp.63-72
• /
• 2003

This study is examine and analysis of the most flying and run distance during swing three times with six balls between two amateurs and pro-golfers in golf field in Sungnam airport. During down swing, kinetics variances are velocity of club-head and balls, vertical angular velocity. this scientic data present amateur golfers with recognition of long flying distances for golf balls. Through this study, the conclusions are as follows. 1. Before impact the balls, The club-head velocity of amateur golfers and pro-golfers show 33.34 - 39.53m/s, 39.04 - 42.82m/s respectively during the down swing. But The club-head velocity, flight and Run distances comparative $K_1$ amateur golfer with the pro-golfer are similar. 2. After impact the balls, The balls velocity if amateur golfers show 53.04 - 61.57m/s, The pro-golfers show 62.32 - 63.4m/s respectively during the down swing. In case of $K_3$,$K_4$, After the impact balls velocity comparative The RA brand with other brand are similar, Flight and Run distance are difference. 3. After impact the balls, The balls velocity are difference to other brand but The long flight and Run distance arrange RA, BIG, TITL. 4. In the vertical flight angle of the ball after impact, amateur golfer showed 16.75 - $18.73^{\circ}$. The pro-golfer showed 15.03 - $16.04^{\circ}$. In the vertical flight angle of the balls ideal $12-13^{\circ}$, The long flight and Run distance approach In the vertical flight angle the balls $12-13^{\circ}$.

• Water Engineering Research
• /
• v.2 no.4
• /
• pp.261-268
• /
• 2001

This study presents the estimation of the entrainment velocity of sediment particles from the scour hole. Sediment particles are entrained from the scour hole downstream of hydraulic structures by the turbulent vortices. Mathematical form of the entrainment velocity of sediment particles from the scour hole was obtained using the impulse-momentum equation with given value of the vertical component of turbulent velocity of the line vortex. Also, its probability density distribution was obtained with the results that the probability density distribution of the vertical turbulent velocity followed the normal distribution. Experimental results of the entrainment velocity of sediment particles showed relatively good agreements with theoretical ones.

• Korean Journal of Applied Biomechanics
• /
• v.20 no.1
• /
• pp.109-116
• /
• 2010

This study aims to comparatively analyze kinetic variables that affect high jump records and thus to provide the basic data for enhancement of physical education teachers' teaching skills and expertise. 10 students who were majoring in physical education in a college of education - five males and five females - were chosen for the experiment in which the 3D image analyzer and ground reaction force measuring unit were adopted. The kinetic variables of the groups, the characteristics and differences were analyzed, and the correlation between each variable and record in each group was examined. The results are as follows: As to the height of center of gravity from one step before stamping to landing, the vertical velocity of the center of gravity at take off, the vertical velocity of the limbs at take off, the angles of the hip joint and ankle joint of the jumping leg, it turned out that male were better than female. As to the angles of the hip joint and ankle joint of the lead leg, female recorded higher values than male. As to the maximum vertical ground reaction force, the maximum horizontal ground reaction force, the vertical impulse, it turned out that male were better than female.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.23 no.10
• /
• pp.1340-1346
• /
• 1999

The turbulent shear flow around a surface-mounted vertical fence was investigated using the two-frame PTV system. The Reynolds number based on the fence height(H) was 2950. From this study, it is revealed that at least 400 instantaneous velocity field data are required for ensemble average to get reliable turbulence statistics, but only 100 field data are sufficient for the time-averaged mean velocity information. Various turbulence statistics such as turbulent intensities, turbulence kinetic energy and Reynolds shear stress were calculated from 700 instantaneous velocity vector fields. The fence flow has an unsteady recirculation region behind the fence, followed by a slow relaxation to the flat-plate boundary layer flow. The time-averaged reattachment length estimated from the streamline distribution is about 11.2H. There exists a region of negative Reynolds shear stress near the fence top due to the highly convex (stabilizing) streamline-curvature of the upstream flow. The large eddy structure in the separated shear layer seems to have significant influence on the development of the separated shear layer and the reattachment process.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.05a
• /
• pp.521-526
• /
• 2004

In order to evaluate the effect of blasting vibration in buildings and it's resident located around blasting construction field in urban area, blasting vibration characteristics were measured the vibration level, vibration velocity. The 250g and 750g of charged powder were used at the apartment and at the ground, respectively. In the measurement of the ground, Z(perpendicularity) axis was the highest value in vibration level, but vertical axis was the highest value at 25m point and longitudinal axis was the highest value at 50m point in vibration velocity. The amount of measurement was high value when measuring point is higher than blasting source, while that of measurement was low value when measuring point is lower than blasting source. In the measurement of the apartment, 2 axis was the highest value in vibration level, but in vibration velocity transverse axis was the highest value at ground, was vertical axis at 1st floor, was longitudinal axis at 3rd floor and was vertical and longitudinal axis at 5th floor. The vibration level and the vibration velocity of 50m point showed higher correlation value than 25m point at the ground, but those of 25m point showed higher correlation value than 50m point at the apartment.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.4C
• /
• pp.406-412
• /
• 2003

A fast multiple object motion detection method using periodogram has been proposed. Each frame is projected to vertical and horizontal directions, and then temporal FFT is applied. A line in two dimensional frequency domain indicates velocity. To estimate the velocity of an object, we intergrate along a line which passes through the origin in frequency domain. If a frame contains multiple moving objects, multiple peaks are detected corresponding to the velocity of each object. After pairing these peaks, we can determine the velocities of an object. In the proposal method we can easily pair horizontal and vertical velocity components efficiently with simple computation by combining projections in 45$^{\circ}$ and 135 $^{\circ}$ directions in addition to the vertical and horizontal direction.

• Particle and aerosol research
• /
• v.14 no.2
• /
• pp.35-40
• /
• 2018

Vertical particle size distribution, total particle concentration, wind velocity, temperature and humidity measurement was performed with a drone. The drone was equipped with a wind sensor, house-made optical particle count(Hy-OPC), condensation particle counter(Hy-CPC), GPS, Temperature, Relative Humidity, Pressure and communication system. Base on the wind velocity and the particle size vertical distribution measurement with drone, the particle mass flux was calculated. The vertical particle distribution showed that the particle number concentration was very strongly correlated with the relative humidity.

• Proceedings of the KSRS Conference
• /
• 2005.10a
• /
• pp.54-57
• /
• 2005

This study examines moisture supplement from the warm ocean in snowfalls of two cases and heavy rainfall of Typhoon case. The QuickSCAT wind is used to evaluate the convergence of moisture fluxes in the storms from the sea in estimation of the amount of heavy snowstorm and rainfall. The results show that enough water vapor transport from ocean to atmosphere induced the severe storms, because strong QuickSCAT -derived vertical velocity nearly concurred with heavy snowfall and rainfall. In the present study, we attempted to show that QuickSCAT wind can be used to forecast the severe weather events, such as heavy snowfall and rainfalls.