• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.443-445
• /
• 2008

We have fabricated vertical type organic thin film transistor using $C_{60}$ as a n-type active material to improve the problems of conventional OTFTs. In general, it can be argued that the characteristics of organic transistor were influenced by carrier mobility and density. We have used several kinds of metals as source and gate electrodes to optimize the device characteristics using $C_{60}$. In addition, we have examined the feasibility of fabrication of organic light-emitting transistor (OLET) using MEH-PPV as an emission layer.

• International Journal of Fluid Machinery and Systems
• /
• v.4 no.2
• /
• pp.229-234
• /
• 2011

For Lift-type Vertical Axis Wind Turbine (VAWT), it is difficult to evaluate the performance through the scale-model wind tunnel tests, because of the scale effect relating to Reynolds number. However, it is beneficial to figure out the critical value of Reynolds number or minimum size of the Lift-type VAWT, when designing this type of micro wind turbine. Therefore, in this study, the performance of several scale-models of Lift-type VAWT (Reynolds number : $1.5{\times}10^4$ to $4.6{\times}10^4$) was investigated. As a result, the Reynolds number effect depends on the blade chord rather than the inlet velocity. In addition, there was a transition point of the Reynolds number to change the dominant driving force from Drag to Lift.

• Journal of Ocean Engineering and Technology
• /
• v.16 no.3
• /
• pp.1-7
• /
• 2002

In this paper, a numerical model to analyze the performance of a vertical slit-type wave absorber is developed under the assumption of inviscid water waves. The formulation combines the linear potential theory with a semi-empirical description of the eddy-shedding at a slit-type wave absorber. We investigated the reflection coefficients over a wide frequency range for a vertical slit-type wave absorber both with and without a solid rear wall. Model test was conducted at KRISO' s two dimensional wave tank to validate the theoretical results. It is found that the agreement between theoretical results and experimental data is surprisingly good. We found that the wave absorbing system using a vertical slit plate has sufficient potentials for breakwaters for ocean development.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 2006.03a
• /
• pp.217-224
• /
• 2006

This thesis investigates the behavior of precast wall systems with a new vertical connection which are proportioned by the displacement based design. The proposed precast wall systems are supposed to provide additional spaces and seismic strengthening in remodeling existing residential buildings. For a fast remodeling constructions using PC wails require an efficient, economic fabrication method. A C-type vertical connections for PC wall systems is proposed for transfer of bending moment between walls in the vertical direction while a shear key in the center of wall is prepared to transfer shear forces by bearing. The proposed vertical connection allows us easy fabrication because of different direction of slots at the edges of wall. The dimension of C-type connection components are determined by engineering models and a series of test.

• Journal of the Korean Society of Safety
• /
• v.34 no.5
• /
• pp.15-21
• /
• 2019

A rack-type warehouse has the advantage of storing a large amount in a small area by loading goods vertically. But in terms of fire risk, the fire load is very high, which can cause massive damage in the event of a fire. In the United States, research has been actively conducted to minimize the spread of vertical fires, and relevant standards have been established and operated. In Korea, research and related standards are insufficient to prevent the vertical spread of rack-type warehouse fires. In this study, an experimental study was conducted to prevent the vertical spread of a rack-type warehouse fire using a horizontal barrier and in-rack sprinklers. As a result of the test, the horizontal barrier considering the continuous flame prevented the vertical spread of the flame for a certain time. However, the horizontal barrier with continuous flame did not show the effect of preventing continuous flame. The combination of the horizontal barrier and the in-rack sprinkler prevented the vertical spread of fire effectively. In addition, the heat collecting effect through the horizontal barrier was shown and helped the early operation of the in-rack sprinklers.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.19 no.9
• /
• pp.825-831
• /
• 2006

As an increase of chip complexity and level of chip integration, chip input/output (I/O) pad pitches are also drastically reduced. With arrival of high complexity SoC (System on Chip) and SiP (System in Package) products, conventional horizontal type probe card showed its limitation on probing density for wafer level test. To enhance probing density, we proposed new vertical type probe card that has the $70{\mu}m$ probe needle with tungsten wire in $80{\mu}m$ micro-drilled hole in ceramic board. To minimize alignment error, micro-drilling conditions are optimized and epoxy-hardening conditions are also optimized to minimize planarity changes. To apply wafer level test for target devices (T5365 256M SDRAM), designed probe card was characterized by probe needle tension for test, contact resistance measurement, leakage current measurement and the planarity test. Compare to conventional probe card with minimum pitch of $50{\sim}125{\mu}m\;and\;2\;{\Omega}$ of average contact resistance, designed probe card showed only $22{\mu}$ of minimum pitch and $1.5{\Omega}$ of average contact resistance. And also, with the nature of vertical probing style, it showed comparably small contact scratch and it can be applied to bumping type chip test.

• The korean journal of orthodontics
• /
• v.27 no.3 s.62
• /
• pp.431-444
• /
• 1997

This research was carried out to compares the treatment effects of Horizontal and Vertical type activators in Angle's Class II div. 1 maloccusion patients with mandibular retrusion dand to find out whether different treatment effects or growth pattern were observed between sexes in each study groups. The results were as follows: 1. In Horizontal activator group, forward positioning of mandible and vertical increase in anteror face as examplified by increase of LAFH and AEM were observed when pre and post-treatment datas were evaluated. 2. Males samples in Horizontal activator group showed increase in mandiular length accmpanied by posterior positioning of maxilla, wheras female samples in Horizontal activator group showed increase in mandibular body length, labial inclination of mandibular incisors and increase in lower anterior facial height .3. In vertical activator group, increase in AFH, LAFH, PFH and LPFH were observed when pre and post treatment datas were evaluated. 4. Male samples in Vertical activator group showed increase in mandibular body length and anterior and posterior facial heights, whereas females samples of Vertical activator group showed mainly increase in anterior facial height. 5. When pre and post treatment datas of Horizontal and Vertical activator groups were compared, skeletal difference were mainly observed in pretreatment datas but dental difference were observed in post treatment datas ,indicating that two actiators differ only in their effects to dental variables. 6. Difference between sexes were noted after treatment although no difference were observed between sexs in each groups before treatmentt. This indicates that inherent growth effects in each sex exerts more influence 1km appliances used for treatment.

• Korean Journal of Microbiology
• /
• v.24 no.3
• /
• pp.308-316
• /
• 1986

Vertical distribution of heterotrophic bacteria and physico-chemical characteristics were measuted in Kum River estuarine sediments. And interrelationship between heterotrophic bacterka and environmental factors was also studied. The type of sediment of Site 1 was silty clay, and sand at Site 2. Annual pH ranges were between 7.1 and 7.7 in the clay type sediment (Site 1) and 6.9-7.2 in the sand type sediment (Site 2). It was shown that organic matter contents were higher in the clay type sediment than those of sand type sediment. Redox potential values of sediments were decreased rapidly with depth at Site 1, but those of Sete 2 showed vertical fluctuation. Nitrogens(ammonia+amino acid-N, nitrate-N, nitrite-N) and phosphate in the clay type sediment showed higher values than those of sand type sediment. Annual distribution of heterotrophic bacteria were ranged $6.71{\times}10^4$ cells/g dry wt. $-2.50{\times}10^6$ cells/g dry wt. In the clay type sediment and $2.67{\times}10^3$ cells/g dry wt. $-1.94{\times}10^6$ cells/g dry wt. in the sand type sediment. Distribution of proteolytic, lipolytic, and amylolytic bacteria were decreased with the depth and the highest density was found in April and the lowest in January. Bacterial populations in sediments were closely correlated with such environmental factors as pH, redox potential, moisture content, organic matter contents, and inorganic nutrients such as nitrite-N and phosphate-P.

• Journal of the Korean Society of Costume
• /
• v.54 no.2
• /
• pp.149-165
• /
• 2004

In this study, the photographic and anthropometric measurements of men in the 20's were made. and pattern making professionals visually evaluated their side photos to classify lateral views. These data were analyzed by being compared with existing research results to select objective standards, and body types were classified according to the selected standard. In addition, body features were defined according to lateral views based on measurement items and indices, and standard lines and determining factors for visual evaluation which determines lateral views were revealed. Back length - front length size smaller than 1.5cm was named as the lean-back type, 1.5∼3.9cm was named as the straight type. and that larger than 3.9cm was named as the bend-forward type. In the straight type, the bisection point of waist depth was located at a similar place to tragion level vertical line. In the lean-back type, the point was at the front of tragion level vertical line. In the bend-forward type, the point was at the back of tragion level vertical line.

• Journal of the Architectural Institute of Korea Structure & Construction
• /
• v.34 no.5
• /
• pp.43-50
• /
• 2018

The temperature of underground water generally remains constant regardless of the season. therefore, it is possible to get plenty of energy if we use characteristics of underground water for both cooling and heating. This study evaluates efficiency of real size coaxial and U-tube type complex geothermal system which is combined with underground water well. This study also evaluates relative efficiency/adaptability through comparison with existing geothermal systems(vertical closed loop system, open loop system(SCW)). The heat exchange capacity of complex geothermal system according to temperature difference between circulating water and underground water shows very high significance by increasing proportionally. The temperature change of underground water according to injection energy, shows very high linear growth aspect as injection thermal volume heightens. As a result of evaluation of heat exchange volume between complex geothermal system and comparative geothermal system, coaxial type has 26.1 times greater efficiency than comparative vertical closed type and 2.8 times greater efficiency than SCW type. U-tube type has 26.5 tims greater efficiency than comparative vertical closed type and 2.8 times greater than SCW type as well. This means complex geothermal system has extremely outstanding performance.