• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.31 no.6
• /
• pp.403-408
• /
• 2019

In general, the caisson having the perforated wall is used to for the purpose of reducing the wave reflection and wave overtopping. In this study, the hydraulic characteristics (reflection coefficient) of the perforated wall caisson chamber filled with aggregates (rocks) were investigated with hydraulic model tests. When the perforated wall chambers were filled with aggregates, the reflection coefficients would increase. However, it was confirmed that the rock filling method into the perforated wall chamber could secure the stability of the structures and satisfy the hydraulic characteristics at a certain level.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2005.03a
• /
• pp.392-399
• /
• 2005

Shear modulus (or rigidity) of dam material is an important parameter which can be directly associated with the deformation of dam. Seepage or leakage of water can cause the defects or cracks of dam body. The existence of cracks and rigidity of dam body are decisive information for the estimation of dam safety. Rigidity of material is mainly determined from S-wave velocity and the defects of dam body can be detected by seismic reflection survey. Therefore, seismic reflection survey will be a desirable method which can give a solution about dam safety problem. Among various physical properties of dam body, S-wave velocity is the most important information but it is not easy to get the information. In this study, diverse measuring techniques of S-wave reflection survey were attempted to get the information about S-wave velocity of dam body. Ultimately, S-wave velocity could be estimated by the analysis of SH reflection events which can be easily observed in shot gather data obtained from SH measuring technique. Meanwhile, P-wave reflection survey was also performed at the same profile. P-beam radiation technique which can reduce the surface waves and reinforce the P-wave reflection events was applied for giving a help to analyse P-wave velocity. In the end, P-and S-wave velocity, Vs/Vp, Poisson's ratio distribution of the vertical section under the profile could be acquired.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2006.11a
• /
• pp.396-402
• /
• 2006

An efficient spline boundary element scheme is newly developed for water wave scattering of an incident wave train on a submerged breakwater. Validation of the present scheme is accomplished through the numerical experiments for various cases, by comparing the numerical results with theories vailable in the literature. Very accurate reflection and transmission coefficients for thin horizontal breakwater are obtained. It is observed that the reflection coefficient for the rectangular breakwater is significantly affected by the thickness. Horizontal and vertical forces on the breakwater for various thicknesses were also investigated.

• Journal of the Society of Naval Architects of Korea
• /
• v.48 no.1
• /
• pp.23-32
• /
• 2011

Numerical analysis of hydrodynamic performance of a movable submerged breakwater was carried out as an eco-friendly marine structure for coastal and harbor protection. Using boundary elements method with two-dimensional frequency-domain reflection and transmission coefficients and wave forces acting on the submerged flat plate were calculated with various submerged depths and respective motion allowable modes. The movable breakwater was found to be more efficient in wave-blocking than the fixed structure. Variation of reflection coefficients was significantly influenced by vertical motion of the body.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2003.05a
• /
• pp.56-56
• /
• 2003

플라즈마 식각에서 물리적 손상과 전기적 손상은 차세대 Nanoscale 소자와 Deep - Submicron 반도체공정에서 해결되어야 할 가장 큰 문제 중 하나이다. 이 중 전기적인 손상을 줄이기 위한 몇 가지 무손상 공정이 제시되고 있으며, 그러한 기술 중의 하나가 이온빔의 Low Angle Forward Reflection을 이용한 식각방법이다. Low Angle Forward Reflection방법은 이온소오스로부터 발생시킨 이온을 Low Angle 에서 Reflection-시켜 이온빔을 중성화되도록 하는 방법으로, 이전 연구를 통해 Reflection시 입사각이 5도일 경우 대부분의 이온들이 중성화되는 결과를 얻었다. 또한, 실험에 사용된 $SF_6,{\;}NF_3,{\;}CF_4$와 같은 모든 가스종에서 유사한 값의 중성화 정도를 관찰할 수 있었으며, 이러한 가스를 이용하여 $Si0_2$ 식각시 Vertical한 Profile 결과를 얻었다. 본 연구에서는 기존 Grid 장치에서 이온소오스 부분에 Low Angle Forward Reflected Neutral Beam을 위한 판형 Reflector를 부착하였으며, 이에 따라 중성빔의 Flux가 크게 향상되며 Beam의 직진성을 향상시킬 수 있었다. 또한, F계열 가스를 이용한 실험을 통해 $Si0_2$ 식각율과 식각특성 면에서 향상된 실험결과를 얻을 수 있었다.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.22 no.6
• /
• pp.627-636
• /
• 2002

Identification and sizing of surface breaking vertical cracks using angle beam ultrasonic testing in practical situation quite often become very difficult tasks due to the presence of non-relevant signals caused by geometric reflectors. The present work introduces effective and systematic approaches to take care of such a difficulty by use oi angle beam ultrasonic testing models that can predict the expected signals from various targets very accurately. Specifically, the model-based TIFD (Technique for Identification of Flaw signals using Deconvolution) is Proposed for the identification of the crack tip signals from the non-relevant geometric reflection signals. In addition, the model-based Size-Amplitude Curve is introduced for the reliable sizing of surface breaking vertical cracks.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.38 no.5
• /
• pp.316-322
• /
• 2005

In order to develop a floating breakwater, which can efficiently control long period waves, vertical plates are attached in pontoon. Wave control and dynamic behaviors of the newly developed vertical plates type are verified from numerical analysis and hydraulic experiment. As a result, for the wave control and energy dissipation, the newly developed vertical plates type is more efficient than the conventional pontoon type. For the floating body motion, the wave transmission, depending on incident wave period, is decreased at the natural frequency. Dimensionless drift distance has similar trend of the reflection rate of wave transformation near natural frequency except maximum and minimum values. Dimensionless maximum tension is 17 percent of the weight of floating breakwater in case of the conventional pontoon type and 18 percent or 14 percent in case of the newly developed vertical plates type. Thus, it is shown that the wave control is improved by the vertical plates type. In addition, by adjusting the interval of the front and back vertical plate, we would control proper wave control.

• Korean Journal of Materials Research
• /
• v.23 no.3
• /
• pp.194-198
• /
• 2013

In this paper, we studied a p-type reflector based on indium tin oxide (ITO) for vertical-type ultraviolet light-emitting diodes (UV LEDs). We investigated the reflectance properties with different deposition methods. An ITO layer with a thickness of 50 nm was deposited by two different methods, sputtering and e-beam evaporation. From the measurement of the optical reflection, we obtained 70% reflectance at a wavelength of 382 nm by means of sputtering, while only 30% reflectance resulted when using the e-beam evaporation method. Also, the light output power of a $1mm{\times}1mm$ vertical chip created with the sputtering method recorded a twofold increase over a chip created with e-beam evaporation method. From the measurement of the root mean square (RMS), we obtained a RMS value 1.3 nm for the ITO layer using the sputtering method, while this value was 5.6 nm for the ITO layer when using the e-beam evaporation method. These decreases in the reflectance and light output power when using the e-beam evaporation method are thought to stem from the rough surface morphology of the ITO layer, which leads to diffused reflection and the absorption of light. However, the turn-on voltage and operation voltage of the two samples showed identical results of 2.42 V and 3.5 V, respectively. Given these results, we conclude that the two ITO layers created by different deposition methods showed no differences in the electric properties of the ohmic contact and series resistance.

• Journal of the Optical Society of Korea
• /
• v.5 no.2
• /
• pp.55-59
• /
• 2001

Results of an experimental study of possible ways to extend the capabilities of a big size transmission type holographic screen are presented. Different approaches to the problem of making a big size screen have been considered and tested experimentally. Up to 60$\times$80 $\textrm{cm}^2$ screens have been recorded on a single photographic plate VRP-M. By attaching a mirror behind the screen, the reflection mode of operation has been obtained. In this arrangement some additional peculiarities appear in the screen, which can be used to extend the screen capabilities. The first possibility is to increase the screen size by mosaicking the subscreens in the reflection mode of operation. Screens of 120$\times$80 $\textrm{cm}^2$ and 180$\times$40 $\textrm{cm}^2$ have been obtained by proper alignment of 60$\times$40 $\textrm{cm}^2$ subscreens. The second possibility is to move the viewing Bone by rotation of the screen together with the mirror and thereby realize by the eye-tracking capability. Methods of increasing vertical size of the viewing zone have been considered. Along with the multi-exposure method, which was considered in previous papers, addition of the vertical diffuser with the optimized scattering angle has been tested experimentally. The vertical size of the viewing zone has been increased by up to 10-15 cm. Another method consists of usage of a diffraction grating with vertical dispersion to solve the same problem.

• Journal of Advanced Research in Ocean Engineering
• /
• v.1 no.1
• /
• pp.44-54
• /
• 2015

Breakwaters are the coastal structures constructed either perpendicular (shore connected) or parallel (detached) to the coast. The main function of breakwater is to create a tranquil medium on its leeside by reflecting the waves and also dissipating the wave energy arriving from seaside, resulting in ease of manoeuvrability to boats or ships to their berthing places. Different types of breakwaters are being used at present, such as rubble mound breakwater, vertical wall type breakwater and composite breakwater. The objective of this paper is to investigate reflection coefficients (Kr) and dissipation (loss) coefficients (Kl) for physical models of Quarter circle caisson breakwater of three different radii of 0.550 m, 0.575 m and 0.600 m with S/D ratio of 2.5 (S=spacing between perforations, D=diameter of perforations). The models were tested in the monochromatic wave flume of the department, for different incident wave heights (Hi), Wave periods (T) and water depths (d). It was observed that reflection coefficient increased with increase in the wave steepness (Hi/gT2) and decreased with increase in depth parameter (d/gT2) and hs/d (Height of structure including rubble base/depth of water). The loss coefficient decreased with increase in the wave steepness and increased with increase in depth parameter and hs/d.