• Archives of Plastic Surgery
• /
• v.38 no.3
• /
• pp.300-308
• /
• 2011

Purpose: The goal of reduction mammaplasty is breast with natural cone shape, minimizing scars, well-placed and sensate nipple-areolar area and maintaining breast physiology. In order to satisfy that goal, variable reduction mammaplasty methods are performed, however, two methods such as vertical reduction method and inverted T-scar method are currently most used. We compared indications and advantages of the two methods and set up useful guidlines. Methods: For 15 years from 1995 to 2010, we experienced 84 patients (162 breasts). We performed vertical reduction method as Lejour's superior pedicle technique (45 patients) and inverted T-scar method as Goldwyn's inferior dermal flap technique (39 patients). We evaluated the result of the operation comparing patient's age, amount of resected tissue, complications and post-operative scars of the two methods. Results: The mean age was 36 years and the vertical reduction group was 3 years younger than inverted T-scar group. The mean breast tissue resection amount per one breast, inverted T-scar group (712 gm) was lagger than vertical reduction group (395 gm). Conclusion: There is no ideal method for reduction mammaplasty until now. However, we suggest that guide line, the vertical reduction method is effective for minimal and moderate macromastia in young and middle aged women and inverted T-scar method is appropriate for severe macromastia with ptosis in elderly women. Recently, all procedures tried shorter and smaller scar on the vertical line as small I, J or L shape scar, and inframammary fold as short inverted T-scar.

• Wind and Structures
• /
• v.9 no.1
• /
• pp.59-74
• /
• 2006

Vertical stabilizer plates have been found to be an effective aerodynamic measure to improve the aerodynamic stability of bridges either with an open cross section or with a streamlined box cross section in wind tunnel testings and have been adopted in some long span bridges. By taking an open deck II-shaped section and a closed box section as examples, the mechanism of vertical stabilizer plates for improving aerodynamic stability are investigated by using numerical simulation based on Random Vortex Method. It is found that vertical stabilizer plates can increase the amplitude of the heaving motion, and decrease that of the rotational motion of the bridge decks.

• Journal of Power System Engineering
• /
• v.17 no.6
• /
• pp.95-101
• /
• 2013

A stereo PIV measurements in a circulating water channel has been performed to investigate the skin friction reduction mechanism of the outer-layer vertical blades first devised by Hutchins. In a recent PIV measurement study, considerable skin friction reduction was achieved as much as 2.73%~7.95% by outer-layer vertical blades array. In the present study, the influence of vertical blades array upon the characteristics of the turbulent coherent structures was analyzed by proper orthogonal decomposition method. It is observed that the vortical structures are cut and deformed by blades array and also the turbulent intensity and the Reynolds stress were weakened by the blades. These phenomena strongly associate the skin-friction drag reduction mechanism in the turbulent boundary layer flow.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.25 no.3
• /
• pp.195-203
• /
• 2020

This paper presents a parasitic inductance reduction design method for the stable driving of GaN HEMT. To reduce the parasitic inductance, we propose a vertical lattice loop structure with multiple loops that is not affected by the GaN HEMT package. The proposed vertical lattice loop structure selects the reference loop and designs the same loop as the reference loop by layering. The design reverses the current direction of adjacent current paths, increasing magnetic flux cancellation to reduce parasitic inductance. In this study, we validate the effectiveness of the parasitic inductance reduction method of the proposed vertical lattice loop structure.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2001.06a
• /
• pp.21-31
• /
• 2001

The last 30 years have been significant worldwide growth in the use of EPS as a lightweight fill material. A new construction method was introduced, which reduces earth pressure acting on culvert and conduit by placing a thin layer of EPS. This paper analyzes the compressible inclusion function of EPS and geogrid which can results in reduction of earth pressure by arching that is the behaviour of soil-structure system involving redistribution of soil stress around the structure. Field test was conducted to evaluate the reduction of vertical earth pressure using EPS and geogrid inclusion. Based on field test it is found that the magnitude of reduced vertical earth pressure was about 24~50% compared to conventional method.

• Structural Engineering and Mechanics
• /
• v.10 no.6
• /
• pp.603-619
• /
• 2000

Analysis of a framed structure for vertical vibration requires a lot of computational efforts because large number of degrees of freedom are generally involved in the dynamic responses. This paper presents an efficient modeling technique for vertical vibration utilizing substructuring technique and super elements. To simplify the modeling procedure each floor in a structure is modeled as a substructure. Only the vertical translational degrees of freedom are selected as master degrees of freedom in the inside of each substructure. At the substructure-column interface, horizontal and rotational degrees of freedom are also included considering the compatibility condition of slabs and columns. For further simplification, the repeated parts in a substructure are modeled as super elements, which reduces computation time required for the construction of system matrices in a substructure. Finally, the Guyan reduction technique is applied to enhance the efficiency of dynamic analysis. In numerical examples, the efficiency and accuracy of the proposed method are demonstrated by comparing the response time histories and the analysis time.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.1C
• /
• pp.33-39
• /
• 2009

Vertical soil stress near a pile subjected to negative skin friction (NSF) may be reduced due to shear transfer at the pile-soil interface. A three-dimensional finite difference analysis has been performed to clarify the influence of vertical and horizontal stress reductions on the pile behavour. In addition, a simple equation has been proposed to estimate vertical stress reduction of the soil near the pile. The vertical and horizontal stresses are reduced by substantial amount compared to corresponding stress components at the Greenfield condition. The horizontal extent of vertical stress reduction of the soil near the pile is rather limited to about up to 4-8 D, where D is the pile diameter. The findings from the current research indicate that widely used $\beta$-method may result in over-estimation of dragload (compressive force on piles due to NSF) and hence stress reduction needs to be incorporated in the original equation.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.56 no.4
• /
• pp.395-406
• /
• 2020

The objectives of this study were to develop the optimal structures of recirculating aquaculture tank for improving the removal efficiency of solid materials and maintaining water quality conditions. Flow analysis was performed using the CFD (computational fluid dynamics) method to understand the hydrodynamic characteristics of the circular tank according to the angle of inclination in the tank bottom (0°, 1.5° and 3°), circulating water inflow method (underwater, horizontal nozzle, vertical nozzle and combination nozzle) and the number of inlets. As the angle in tank bottom increased, the vortex inside the tank decreased, resulting in a constant flow. In the case of the vertical nozzle type, the eddy flow in the tank was greatly improved. The vertical nozzle type showed excellent flow such as constant flow velocity distribution and uniform streamline. The combination nozzle type also showed an internal spiral flow, but the vortex reduction effect was less than the vertical nozzle type. As the number of inlets in the tank increased, problems such as speed reduction were compensated, resulting in uniform fluid flow.

• Earthquakes and Structures
• /
• v.13 no.2
• /
• pp.103-118
• /
• 2017

In vertical seismic isolation (VSI), a building is partitioned intentionally by vertical layers into two dynamically different substructures for seismic response reduction. Initially, a 1-story frame was partitioned into two substructures, interconnected by viscous and visco-elastic links, and seismic responses of the original and the vertically isolated structures (VIS) were obtained, considering a large number of stiffness and mass ratios of substructures with respect to the original structure. Color contour graphs were defined for presentation and investigation of large amounts of output results. Dynamic characteristics of the isolated structures were studied by considering the non-classical damping of the system, and then the effects of viscous and visco-elastic link parameters on the modal damping ratios were discussed. On this basis, three states of mass isolation, interactional state, and control mass were differentiated. Response history analyses were performed by Runge-Kutta numerical method. In these analyses, interaction of isolation ratios and link parameters, on response control of VIS was studied and the appropriate ranges for link parameters as well as the optimal ranges for isolation ratios were suggested. Results show that by using the VSI technique, seismic response reduction up to 50% in flexible substructure and even more in stiff substructure is achievable.

• Journal of Yeungnam Medical Science
• /
• v.4 no.2
• /
• pp.51-58
• /
• 1987

The goal of reduction mammaplasty is a breast with natural contour and volume, aesthetically situated scars, and a well-placed, sensate nipple and areola. The most successful techniques achieve this through the excision of tissue from the lower part of the breast based on some variation. However, the Mckissock's vertical bipedicle technique is the popular method for reduction mammaplasty. As an alternative modified Mckissock's method, we have found the use of only an inferior dermal flap with a keyhole pattern to be a simple and safe method for obtaining satisfactory aesthetic results. We have used inferior dermal flap for 4 patients recently and obtained the advantages as below compare to the Mckissock's method. 1. Rich blood supply to the broad based inferior flap. 2. More easy transposition of the nipple and areola. 3. More good operation field for resection of breast tissue. 4. Short operation time. 5. Can applied to the gigantomastia.