• Transactions of the Korean Society of Mechanical Engineers
• /
• v.8 no.5
• /
• pp.450-461
• /
• 1984

A new indirect tool wear sensing technique is proposed using time series analysis. The acceleration measured on the tool post in the vertical direction during turning is sampled with uniform interval, and fitted following the ARMA modeling procedures. Various signal characteristics are observed in respect with the progress of flank wear. From those observations it is believed that; *The variance of the signal is approximately proportional to the increase of flank wear. *The absolute power of a dynamic mode decreases in the beginning of cutting until the maximum flank wear increases up to 0.4-0.5mm, and then increases. *The other characteristics are not so much related to the tool wear as the signal variance and the absolute power of a dynamic mode. Hence, the absolute power of a dynamic mode seems to be a good factor for the indication of tool-change time regardless of tool material or cutting conditions.

• Progress in Superconductivity and Cryogenics
• /
• v.6 no.2
• /
• pp.11-14
• /
• 2004

YBCO thin films have good characteristics for current limiting materials due to compact size and high current carrying capability. But the irregularities and the extreme thin thickness of YBCO films cause some difficulties in simultaneous quench and thermal shock protection. In order to solve these problems, vertical magnetic field generated from solenoid coil was applied to the YBCO element. And also to minimize the inductance caused by the serial connection of magnetic field source with superconducting elements, magnetic field source was separated from the power lines adapting protective current transformer. In this study, electric field-current (E-I) and quench characteristics of YBCO films were analyzed both by electrical measuring method and observations of bubble propagation. From the experiment results, it was revealed that the magnetic fields generated by surrounding coil could induce the uniform quench distribution for all stripes of current limiting units and finally simultaneous quenches were realized in all serial connection of YBCO elements. In addition, the separation of magnetic field source form electrical network could be good solution for simultaneous quench of YBCO films without any unnecessary effect caused by serial connection.

• Advances in materials Research
• /
• v.5 no.3
• /
• pp.193-203
• /
• 2016

Compared to metal-to-metal tribology, polymer tribology presents further complexity as it is more prone to be influenced by operating conditions. Over the past two decades, progress in the field of wear of polymers has led to the establishment of more refined wear mechanisms. The current paper establishes the link between different load parameters and the wear rate of polymers, based on experimental investigations. A pin-on-plate reciprocating tribometer was used to examine the wear behaviour of polyamide sliding against a steel counterface, under constant and fluctuating loads, in dry conditions. In addition, the influence of controlled imperfections in the polymer surface upon its wear rate were examined, under cyclic and steady loading, in order to better understand surface fatigue wear of polymers. The imposed imperfections consisted of vertical artificial deep crack (slit) perpendicular or parallel to the direction of sliding. The study concludes with the followings findings; in general, wear of polymers shows a significant tendency to the type of applied load. Under cyclic loads, polymers show an increase in wear rate compared to those tested under static loads. Such increase was found to increase with the increase in cyclic load frequency. It is also demonstrated that surface cracks results in higher wear rates, particularly under cyclic loads.

• Progress in Medical Physics
• /
• v.13 no.4
• /
• pp.234-241
• /
• 2002

The depth electrode technique, especially using the occipito-temporal route is widely used in the clinic, since it is known to be the most precise method about the invasive study of the mesial temporal lobe epilepsy. The depth electrode with the occipito-temporal route has been applied with manual calculation of MR images. Inherently there are some factor causing significant errors due to geometrical axis alignment, such as miss alignment of horizontal or vertical cutting line. In order to correct it in manually, it takes a long time. In this study, authors has developed the software for automate calculation of MRI wording for instance calculation and for the no time delaying operation. Authors could show that this software is useful for the clinic after applying if for 33 cases of the patients.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2002.05a
• /
• pp.1079-1084
• /
• 2002

Systems engineering technology development program for Korea next-generation high-speed railway(KNHR) system in progress is a national large-scale system development program that is not only a large-size and complex but also multi-disciplinary in nature. Using the RDD-IOO, a systems engineering tool, the KNHR program can establish requirements traceability and development process management in the course of development. This paper presents the results from a computer-aided systems engineering application to KNHR system technology development project over the three years of activities. The traceability among the system design database in the vertical direction of SE process, as the results of the first year and the second year research was accomplished. The database in both the requirement management domain and the project management domain was developed and set up the traceability between them in the horizontal direction of the SE process in the V model as the results of the third year research. Therefore, KNHR design database was built to support the life-cycle management of the system as well as to reuse the knowledge in future programs. In the following development phase, this database will be utilized to accomplish the test and integration activities providing a baseline database. The outcome of the study contributes to the establishment of the model-based systems engineering approach as a best practice in the accumulation and advancement of systems engineering technology for railway system development.

• Journal of architectural history
• /
• v.25 no.6
• /
• pp.35-44
• /
• 2016

The purpose of this study is to identify the aspect of expression about the form of Shwedagon Pagoda as well as to find out its meanings. The aesthetic value of Shwedagon Pagoda appears as the worship and infinite respect to Buddha realizing its beautiful sacred symbol. The meaning of Shwedagon Pagoda is to progress in keeping pace with the specific flexibility of Buddhism in Myanmar developing Buddhistic diversity and accepting its active changes. As time passes, Shwedagon Pagoda has been transformed. It is because that Myanmar's architecture was developed independently being affected by India with the introduction of Buddhism, and accepted it through autonomous reinterpretation. Then, the function of the worship space surrounding Shwedagon was extended and its annexes and statues of the Buddha were built; its scale became larger. This study shows the comparison between Shwezigon Pagoda and Shwedagon Pagoda. This method of investigation reveals that the formal changes of Shwedagon makes it transform to concise composition and develop aesthetical component giving the sense of vertical rise.

• International Journal of High-Rise Buildings
• /
• v.10 no.4
• /
• pp.299-310
• /
• 2021

External fire spread has the potential to breach vertical compartmentation and violate the fire safety strategy of a building. The traditional design solution to this has been the use of non-combustible materials and spandrel panels but recent audits show that combustible materials are widespread and included in highly complex systems. Furthermore, most jurisdictions no longer require detailing of spandrel panels under many different circumstances. These buildings require rapid investigation using rational scientific methods to be able to adequately classify the fire risk. In this work, we use an extensive experimental campaign of material-scale data to explore the critical parameters driving upward flame spread. Two criteria are outlined using two different approaches. The first evaluates the time to ignition and the time to burnout to assess the ability for a fire to spread, and can be easily determined using traditional means. The second evaluates the preheated flame length as the critical parameter driving flame spread. A wide range of cladding materials are ranked according to these criteria to show their potential propensity to flame spread. From this, designers can use conservative approaches to perform fire risk assessments for buildings with combustible materials or can be used to aid decision-making. Precise estimates of flame spread rates within complex façade systems are not achievable with the current level of knowledge and will require a substantial amount of work to make progress.

• Journal of Industrial Convergence
• /
• v.3 no.2
• /
• pp.51-71
• /
• 2005

As the living standards have been enhanced thanks to rapid to rapid economic growth following industrial progress, today the advancement of woman into specialized jobs keep expanding not only for economic purpose such as increasing family income but also due to changed perception on woman's role, i.e. self-realization. In the actual situations, however, women are generally placed in a inferior position compared with men in most jobs, despite existence of gender equality policy. Therefore, concern and study on female adaptation into job and their work attitude have become increasingly important, which can contribute to alleviating women's discontent in the work but to raising efficiency of job execution and improving work quality. In this treatise, I researched the job attitude of woman for the period of 1980 up to 2005, with interval of every 5 years. For empirical analysis, research has been done towards females teachers in elementary and middle schools as well as female works in financial institutions. Both job fields have comparatively high percentage of female employees and have less sexual discrimination. The purpose of this vertical research is (1) to find out how women workers perceive their job environment, (2) to analyze empirically the change in female job attitude and their flow of consciousness. Ultimately this treatise aimed at contributing to efficient management of female work force in our society.

• Progress in Superconductivity and Cryogenics
• /
• v.8 no.4
• /
• pp.12-14
• /
• 2006

YBCO coated conductors have been fabricated by the reel-to-reel processing using TFA-MOD method. In this work, the fluorine-free Y & Cu precursor solution was synthesized to shorten the calcining time by reducing the evolution of HF gas, thus the meter-long YBCO precursor films can be made within few hours by the continuous slot-die coating & calcination step using the F-free Y & Cu precursor solution. The annealing step was followed to make the YBCO films by the reel-to-reel method with the vertical gas flow system onto the moving tape. To increase the growth rate of the YBCO films by enhancing the removal of HF gas, the low total pressure was adopted in the annealing processing. And the water partial pressure and the oxygen partial pressure were varied to optimize the growth conditions of the MOD-YBCO films on the buffered metal tape. FE-SEM and XRD were used to investigate the surface morphologies and the texture of the meter-long YBCO films. The end-to-end critical current $(I_c)$ of 63A/cm-width and the critical current density $(J_c)$of $0.9MA/cm^2$ with the thickness of $0.7{\mu}m$ were obtained in the 0.42m long coated conductor.

• Progress in Superconductivity and Cryogenics
• /
• v.8 no.1
• /
• pp.65-70
• /
• 2006

Transient heat transfer caused by an impulsive heating in subcooled liquid nitrogen is investigated experimentally. This study is part of out ongoing efforts directed to a stable cryogenic cooling system lot superconducting fault current limiters (SFCL). A thin heater attached by epoxy on one surface of a GFRP plate is immersed in liquid-nitrogen bath at temperatures between 77 K and 55 K. A strong heat flux up to $150W/cm^2$ is generated lot 100 ms, and the temperature of the heater sulfate is measured as a function of time. The behavior of bubbles on the heating surface can be explained by comparing the measured temperature history for vertical and two horizontal (up and down) orientations. It is concluded that the subcooling of liquid nitrogen below 70 K is very effective in suppressing bubbles, resulting in better thermal protection and faster recovery from an impulsive heat.