• 한국항해항만학회지
• /
• 제39권3호
• /
• pp.173-178
• /
• 2015

최근 국내외적으로 수중 유도무기체계 개발로 다양한 형태의 수중운동체 기술이 발전되고 있다. 특히 수중운동체 중 하나인 잠수함은 한국의 특수한 상황에서 최적의 선형설계를 위한 신뢰도 높은 조종성 평가 기술이 요구되며, 이를 위한 정확한 동유체력 계수의 추정 또한 중요한 연구 분야라 할 수 있다. 따라서 본 논문에서는 잠수함 모형을 대상으로 구속모형시험인 VPMM (Vertical Planar Motion Mechanism) 시험을 실시하여 정밀도 높은 동유체력 계수를 추정하였다. 그리고 추정된 연직면 운동에 대한 선형 (Linear) 동유체력 계수 (Hydrodynamic derivatives)들을 이용하여 동안정성 (Dynamic Stability)을 판별하였다. 그 결과, 이론추정치와의 비교를 통해 동유체력 계수의 타당성이 검증되었으며, 잠수함의 연직면 동안정성도 양호한 것으로 평가되었다. 즉, 무한수심으로 정의되는 심도 6.0의 깊은 수심으로 갈수록 주기에 따른 변화가 작아지며, 이론추정치에 근사함을 확인할 수 있었다. 한편 연직면 동안정성 판별에 있어서는, 0보다 큰 양(+)의 값을 가짐으로서 연직면 운동에 대한 동안정성을 만족하는 것으로 나타났다.

• 한국산업융합학회 논문집
• /
• 제19권1호
• /
• pp.10-17
• /
• 2016

In general, articulated robot control technology is limited to the design of robot arm control systems considering each joint of the robot joint as a simple servomechanism. This method describes the varying dynamics of a manipulator inadequately because it neglects the motion and configuration of the whole arm mechanism. The changes of the parameters in the controlled system are significant enough to render conventional feedback control strategies ineffective. This basic control system enables a manipulator to perform simple positioning tasks such as in the pock and place operation. However, joint controllers are severely limited in precise tracking of fast trajectories and sustaining desirable dynamic performance for variations of payload and parameter uncertainties. In many servo control applications the linear control scheme proposes unsatisfactory, therefore, a need for nonlinear techniques that increasing. for Forging process automation.

• 한국운동역학회지
• /
• 제30권4호
• /
• pp.293-299
• /
• 2020

Objective: The aim of this study was to investigate the swing and aerial motion of Kovacs, and evaluate the skill level of Kovacs by Korean adult players on horizontal bar. Method: The subjects for this study were 6 male top athletes participated in the 46th National Gymnastics against Cities and Provinces. After the motions of Kovacs were filmed by digital highspeed camcorder setting in 90 frames/s, kinematical data were calculated through DLT method. The variables were computed in the lapse time, the joint angle, the position·velocity of body COG, the inferred tension force of bar, and body COG path were simulated according to skill level of Kovacs. Results: Firstly, it was revealed that the lapse time was 1.19±0.03 s in the swing phase, and 0.83±0.03 s in the aerial phase. Secondly, it was revealed that the shoulder·hip joint motions of S1 and S2 were better than the other subjects in the swing phase, and the knee joint motions of S1 and S2 were better than the other subjects in the aerial phase. Thirdly, it was revealed that the horizontal·vertical velocity of body COG were -1.40±0.03 m/s, 3.80±0.07 m/s respectively, and the vertical positions of S1 and S2 were higher a little than the other subjects. Lastly, the skill level of Kovacs of this subjects was evaluated into 3 steps; excellent, advanced, normal. They need to train the swing motion including a giant circle, and body motions in the air. Conclusion: It would be suggested that Korean domestic players should improve to increase the vertical velocity at release instant and train to control the limbs elaborately in the air.

• 동력기계공학회지
• /
• 제21권2호
• /
• pp.27-34
• /
• 2017

A heave motion of the offshore crane system with load is affected by unpredictable external factors. Therefore the offshore crane must satisfy rigorous requirements in terms of safety and efficiency. This paper intends to reduce the heave displacement of load position which is produced by rope extension and sea wave disturbance in vertical motion. In this system, the load position is compensated by the winch actuator control. The rope is modeled as a mass-damper-spring system, and a controller is designed by the input-output linearization method. The model system and the proposed control method are evaluated on the simulation results.

• 제어로봇시스템학회논문지
• /
• 제13권12호
• /
• pp.1243-1251
• /
• 2007

In this paper a study on the simplified observability analysis of GPS/INS is introduced. Errors for the position, velocity, attitude, gyro and accelerometer biases, and lever arm between GPS antenna and inertial sensors are considered in the observablity analysis. From the error dynamics model in which relatively small terms are neglected, simple observability conditions are obtained such that the observability of GPS/INS is determined by the test on the attutude, gyro bias, and lever arm. Unobservable errors for the position, velocity, and accelerometer bias are determined by those for the attitude, gyro bias, and lever arm. The simplified observability conditions are applied to a constant speed horizontal motion. It is shown that there are seven unobservable modes for the motion including the vertical component of gyro bias. The analytic observability analysis results are confirmed with a covariance simulation.

• 제어로봇시스템학회논문지
• /
• 제7권9호
• /
• pp.758-765
• /
• 2001

본 논문에서는 랜드마트 정보 없이 장해물의 위치 정도 지도만 주어졌을 때 스테레오 시작(stereo vision)을 가진 이동로봇이 관측위치와 조명의 변화에도 강인한 시각 특징을 랜드마크로써 추출하는 수법을 제안한다. 장해물의편평한 면사에서 보다 안쪽영역에 존재하는 특징이 관측위치의 변화에 영향을 덜 받기 때문에 안쪽 영역에 존재하는 수직선 세그먼트(vertical line segment) 특징을 랜드마크로 선택한다. 그러나 선택된 특징에서는 로봇의 이동과 관측이 오차에 의해 불확실성(uncertainty)이 포함되어 있기 때문에 추정해야만 한다. 이를 위해 영역기반 스테레오 정합과 특징기반 스테레오 정합법을 이용하여 정합된 특징을 선택하고 확장 칼만필터(Extended Kalman Filter)를 이용여 선택된 특징의 위치, 길이를 추정하여 랜드마크로써 등록한다. 실내 이동환경에서의 실험을 통해 제안된 수법의 유용성을 보인다.

• Wind and Structures
• /
• 제30권5호
• /
• pp.485-497
• /
• 2020

A study, using potential water wave theory, is conducted on the oblique water wave motion over two fixed submerged rectangular blocks (breakwaters) placed over a finite step bottom. We have considered infinite and semi-infinite fluid domains. In both domains, the Fourier expansion method is employed to obtain the velocity potentials explicitly in terms of the infinite Fourier series. The unknown coefficients appearing in the velocity potentials are determined by the eigenfunction expansion matching method at the interfaces. The derived velocity potentials are used to compute the hydrodynamic horizontal and vertical forces acting on the submerged blocks for different values of block thickness, gap spacing between the two blocks, and submergence depth of the upper block from the mean free surface. In addition, the wave load on the vertical wall is computed in the case of the semi-infinite fluid domain for different values of blocks width and the incident wave angle. It is observed that the amplitudes of hydrodynamic forces are negligible for larger values of the wavenumber. Furthermore, the upper block experiences a higher hydrodynamic force than the lower block, regardless of the gap spacing, submergence depth, and block thickness.

• 소음진동
• /
• 제9권6호
• /
• pp.1247-1258
• /
• 1999

This paper presents vibration control of a CD-ROM(compact disc-read only memory) drive feeding system consisting of a new type of CD-ROM mount using an electro-rheologocal(ER) fluid. Chemically treated starch particles and silicon oil are used for EF fluid, and its field-dependent yield stresses are experimentally distilled under both the shear and the flow modes. On the basis of the yield stress, an appropriate size of ER CD-ROM mount adapted to conventional feeding system is designed and manufactured. Vibration isolation performance of the proposed mount is evaluated in the frequency domain and compared with that of conventional rubber mount. The ER CD-ROM mount is then installed to the drive feeding system and the system equation of motion is derived. The skyhook controller is then incorporated with the fuzzy technique to improve the performance of ER CD-ROM mount. A set of fuzzy parameters and control rules are obtained from a relation between vertical displacement and pitching motion of the feedng system. Followingthe formulation of the fuzzy-skyhook controller, computer simulation is undertaken in order to evaluate vibration suppression of the CD-ROM drive feeding system subjected to various excitations.

• 한국전문물리치료학회지
• /
• 제23권1호
• /
• pp.72-79
• /
• 2016

Background: Increased foot pronation causes biomedchanical changes at the lower limbs, which may result in musculoskeletal injuries at the proximal joints. Pronation rear-foot leads to plantar fasciitis, Achilles tendonitis, and posterior tibial tendonitis pathologically. According to the recent meta-analysis, They showed that therapeutic adhesive taping is more effective than foot orthoses and motion control footwear, low-Dye (LD) taping has become the most popular method used by physiotherapists. Objects: The purpose of this study was to determine the immediate effects of LD taping results in different ankle motion and ground reaction force (GRF) as before and after applied LD taping on pronated rear-foot during gait. Methods: Twenty-four participants were recruited for this study. The gait data were recorded using an 8-camera motion capture system and two force platforms. At first, the experiments were carried out that participants walked barefoot without LD taping. And then they walked both feet was applied LD taping. Results: The ankle inversion minimum was significantly greater after LD taping than before LD taping (p=.04); however, in the GRF, there were no significant differences in the inversion maximum or total motion of the stance phase (p=.33, p=.07), or in the vertical (p=.33), posterior (p=.22), and lateral (p=.14) peak forces. Conclusion: The application of taping to pronation rear-foot assists in increased ankle inversion.

• 제어로봇시스템학회논문지
• /
• 제14권12호
• /
• pp.1260-1265
• /
• 2008

This study deals with modeling and flight control of quadrotor type (QRT) unmanned aerial vehicles (UAVs). Rigorous dynamic model of a QRT UAV is obtained both in reference and body frame coordinate systems. A disturbance observer (DOB) based controller using the derived dynamic models is also proposed for robust hovering control. The control input induced by DOB is helpful to use simple equations of motion satisfying accurate derived dynamics. The experimental results show the performance of the proposed control algorithm.