• International journal of advanced smart convergence
• /
• 제7권1호
• /
• pp.33-41
• /
• 2018

This study was designed to provide basic data for developing exercise program that helps correcting posture by knowing the effect of strengthening and elongation exercises of upper extremity muscle to forward head posture correction. In this study determined subjects whether they had forward head posture or not. On the basis of the New York state posture rating, if a subject's posture is match up with the normal standard posture, gives 5 points and if the posture is slightly get out of the normal standard posture, gives 3 points and if the posture is apparently get out of the standard, gives 1 points. When determining the forward head posture, if talus, humerus and outer ear center are on the same line, it is determined as normal and if outer ear center is off the line less than 1.0cm, it is a slight deformation and if outer ear center is off the line more than 1.0cm, it is a high deformation. In the study selected people who have more than 1 cm gap between two vertical lines start from outer ear center and acromion separately as subjects. Length between the ideal alignment line measured by using goniometer and temporal region showed statistically significant decrease as $2.36{\pm}1.07cm$ before the intervention and $1.06{\pm}0.88cm$ after the intervention. After 4 weeks of neck and chest extensor muscle exercise, the group who exercised both showed increase in range of neck joint motion and neck flexion of the forward head posture. Meanwhile the group who only exercised neck extensor muscle only and the group who only exercised chest extensor muscle didn't showed statistically significant result. That only the group who exercised both muscles showed significant result is the different with studies before. Because this study didn't target patient who had a lesion, couldn't compare effect of the conservative manner and exercise. However, this study provides the fact that the group who exercised both neck and chest muscle had more effect than the control group.

• Physical Therapy Rehabilitation Science
• /
• 제7권1호
• /
• pp.13-17
• /
• 2018

Objective: This was a correlation study for predicting the power to improve the distance of golf players and developing an effective power program. Design: Cross-sectional study. Methods: The subjects of this study were 24 healthy males and females in their 20s and 30s who were golf athletes living in Seoul and Gyeonggi-do. In the Titleist Performance Institute (TPI) Level 1 test, the twelve swing characteristics include components of stability, mobility, body conditioning ability, and balance. The power test consisted of a vertical jump (VJ) in order to examine the power of the lower body, the seated chest pass (SCP) was used to examine upper body power, and the sit up and throw (SUAT) was used to examine the power of the upper body and core for the TPI Level 2 test. Results: The results of this study showed that the 90/90 was correlated with VJ, SUAT, and SCP scores (p<0.05). Single leg stance was correlated with VJ, SUAT, over head deep squat, and bridge with leg extension were correlated with VJ (p<0.05). The toe touch was correlated with SUAT results (p<0.05). Conclusions: The results of this study showed that the TPI Level 1 test and power test were correlated with the performance of the golf players. Future studies have shown that fitness program development and further research are needed.

• 한국운동역학회지
• /
• 제32권3호
• /
• pp.87-93
• /
• 2022

Objective: The purpose of this research was to investigate the age-related changes in whole-body motor variability during sit-to-stand (STS) task. It has been reported that children perform motor tasks less accurately with greater variability as compared to adults. However, it is still unknown how they utilize the abundant degrees of freedom and accomplish voluntary actions. Uncontrolled manifold (UCM) analysis has been used to partition motor variabilities into two independent variability components, task-relevant variability (V_ORT) and task-irrelevant variability (V_UCM). We investigated what differences exist between children and adults with respect to these two motor variability components in relation to motor development stages. Method: Ten 6-year-old children (height: 116.2 ± 4.3 cm, weight: 23.1 ± 3.9 kg, motor development assessment percentile score: 77.5 ± 18.6%), ten 10-year-old children (height: 138.7 ± 7.2 cm, weight: 35.8 ± 10.3 kg, motor development assessment percentile score: 73.9 ± 12.7%), and ten young adults (age: 23 ± 1.6 year-old, height: 164.3 ± 11.4 cm, weight: 60.8 ± 12.0 kg) participated in this study. Each participant performed STS ten times, and a motion capture system was used to capture the whole-body kinematics. Each segment centers of mass and the whole-body center of mass were calculated, and UCM analysis was used to quantify motor variabilities, V_ORT and V_UCM. One-way ANOVA was used for statistical analysis. Results: We found that children produced more motor variabilities in V_ORT and V_UCM in all three dimensions, anterior-posterior, medial-lateral, and vertical. As age increased, both, V_ORT and V_UCM significantly decreased (p<.05). Conclusion: The greater V_ORT found in children compared to adults indicates that the repeatability over repetitions improves through development, while the greater V_UCM found in children suggests that children better utilize the abundant degrees of freedom during STS compared to adults.

• 한국운동역학회지
• /
• 제21권1호
• /
• pp.31-38
• /
• 2011

This study aimed to determine the effects of the blockage of visual feedback on joint dynamics of the lower extremity. Fifteen healthy male subjects(age: $24.1{\pm}2.3\;yr$, height: $178.7{\pm}5.2\;cm$, weight: $73.6{\pm}6.6\;kg$) participated in this study. Each subject performed single-legged landing from a 45 cm-platform with the eyes open or closed. During the landing performance, three-dimensional kinematics of the lower extremity and ground reaction force(GRF) were recorded using a 8 infrared camera motion analysis system (Vicon MX-F20, Oxford Metric Ltd, Oxford, UK) with a force platform(ORG-6, AMTI, Watertown, MA). The results showed that at 50 ms prior to foot contact and at the time of foot contact, ankle plantar-flexion angle was smaller(p<.05) but the knee joint valgus and the hip flexion angles were greater with the eyes closed as compared to with the eyes open(p<.05). An increase in anterior GRF was observed during single-legged landing with the eyes closed as compared to with the eyes open(p<.05). Time to peak GRF in the medial, vertical and posterior directions occurred significantly earlier when the eyes were closed as compared to when the eyes were open(p<.05). Landing with the eyes closed resulted in a higher peak vertical loading rate(p<.05). In addition, the shock-absorbing power decreased at the ankle joint(p<.05) but increased at the hip joints when landing with the eyes closed(p<.05). When the eyes were closed, landing could be characterized by a less plantarflexed ankle joint and more flexed hip joint, with a faster time to peak GRF. These results imply that subjects are able to adapt the control of landing to different feedback conditions. Therefore, we suggest that training programs be introduced to reduce these injury risk factors.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 1999년도 추계학술발표회 초록집
• /
• pp.15-15
• /
• 1999

In chip plating, several parameters must be taken into consideration. Current density, solution concentration, pH, solution temperature, components volume, chip and media ratio, barrel geometrical shape were most likely found to have an effect to the process yields. The 3 types of barrels utilized in chip plating industry are the conventional rotating barrel. vibrational barrel (vibarrel), and the centrifugal type. Conventional rotating barrel is a close type and is commonly used. The components inside the barrel are circulated by the barrel's rotation at a horizontal axis. Process yield has known to have higher thickness deviation. The vibrational barrel is an open type which offers a wide exposure to electrolyte resulting to a stable thickness deviation. It rotates in a vertical axis coupled with multi-vibration action to facilitate mixed up and easy transportation of components, The centrifugal barrel has its plated work centrifugally compacted against the cathode ring for superior electrical contact with simultaneous rotary motion. This experiment has determined the effect of barrel vibration intensity to the plating thickness distribution. The procedures carried out in the experiment involved the overall plating process., cleaning, rinse, Nickel plating, Tin-Lead plating. Plating time was adjusted to meet the required specification. All other parameters were maintained constant. Two trials were performed to confirm the consistency of the result. The thickness data of the experiment conducted showed that the average mean value obtained from higher vibrational intensity is nearer to the standard mean. The distribution curve shown has a narrower specification limits and it has a reduced variation around the target value, Generally, intensity control in vi-barrel facilitates mixed up and easy transportation of components, However, it is desirable to maintain an optimum vibration intensity to prevent solution intrusion into the chips' internal electrode. A cathodic reaction can occur in the interface of the external and internal electrode. $2HD{\;}+{\;}e{\;}{\rightarrow}20H{\;}+{\;}H_2$ Hydrogen can penetrate into the body and create pressure which can cause cracks. At high intensity, the chip's motion becomes stronger, its contact between each other is delayed and so plating action is being controlled. However, the strong impact created by its collision can damage the external electrode's structure thereby resulting to bad plating condition. 1 lot of chip was divided into two equal partion. Each portion was loaded to the same barrel one after the other. Nickel plating and tin-lead plating was performed in the same station. Portion A maintained the normal barrel vibration intensity and portion B vibration intensity was increased two steps higher. All other parameters, current, solution condition were maintained constant. Generally, plating method find procedures were carried out in a best way to maintained the best plating condition. After plating, samples were taken out from each portion. molded and polished. Plating thickness was investigated for both. To check consistency of results. 2nd trial was done now using different lot of another characteristics.

• 디자인학연구
• /
• 제14권
• /
• pp.1-7
• /
• 1996

디자이너들은 어떤 제품의 크기, 모양 혹은 인터페이스 부분을 설계해야 하는데 그것들이 사용자에게 맞도록 하려면 인간공학 원칙과 데이터를 필요로 하게 된다. 그러나 아직까지 냉장고를 비롯한 가전제품 분야에서는 실제 작업에 쓰일만한 인간공학 관련 디자인 원칙이나 데이터들이 거의 없는 형편이다. 냉장고 디자이너들이 가장 고민하는 문제 가운데 하나인 냉장실과 냉동실의 레이아웃 결정만 하더라도, 서로 다른 레이아웃의 차이를 비교할만한 객관적인 방법이 없다. 그 외에 도어 손잡이를 어떤 모양으로 어느 위치에 부착할 것이지, 조작패널의 사용자 인터페이스는 어떻게 설계할 것인 지 등에 관한 모든 것이 아직까지는 디자이너들의 직관에 의존하고 있다. 본 연구는 이러한 냉장고 디자이너들의 의사결정 과정을 도와주기 위해 몇 가지의 인간 공학적 연구방법을 사용하여 냉장고 디자인에 대한 평가를 시도하였다. 근전도 분석방법은 냉장고의 선반 높이와 냉장실, 냉동실의 레이아웃을 평가하기 위해 사용되었으며, 3차원 동작분석은 도어의 손잡이를 평가하기 위해 사용되었다. 비데오 분석에 의한 사용성 평가의 조작패널의 문제점을 찾아내기 위해 사용되었다. 마지막으로 한국인 인체측정 데이터에 근거한 냉장고의 적정 설계치수 결정 기준을 설정하였다. 이러한 연구결과들은 향후 냉장고 디자인 개발에 참조 될 수 있을 것이다.

• 한국산학기술학회논문지
• /
• 제13권8호
• /
• pp.3513-3520
• /
• 2012

본 연구는 뇌졸중 환자와 정상 성인이 앉은 자세에서 동적으로 변화하는 지지면의 각도에 적응하여 신체를 정위시키는 능력에 차이가 있는지 알아보기 위해 실시되었다. 뇌졸중 환자 12명(남 6명, 여 6명)과 정상 성인 12명(남 6명, 여 6명)을 대상으로 실시하였고, 앉은 자세에서 지지면을 2가지 방향(우세측, 비우세측)으로 기울였을 때 수직선과 머리와 체간이 이루는 각도를 영상 동작 분석 시스템을 이용하여 측정하였다. 앉은 자세에서 우세한 쪽을 올렸을 때 뇌졸중 환자와 정상 성인의 사이의 머리와 체간의 각도는 유의한 차이를 보였다(p<0.05). 앉은 자세에서 비우세한 쪽을 올렸을 때 뇌졸중 환자와 정상 성인 사이의 머리와 체간의 각도는 유의한 차이를 보였다(p<0.05). 앉은 자세에서 비우세한 쪽을 내렸을 때 뇌졸중 환자와 정상 성인 사이의 머리와 체간의 각도는 유의한 차이를 보였다(p<0.05). 앉은 자세에서 우세한 쪽을 내렸을 때 뇌졸중 환자와 정상 성인 사이의 머리의 각도는 유의한 차이를 보였으나(p<0.05) 체간의 각도는 유의한 차이를 보이지 않았다(p>0.05). 본 연구의 결과, 뇌졸중 환자들이 정상 성인에 비해 동적으로 변화하는 지지면의 각도에 적응하여 신체를 정위시키는 능력에 있어서 다양한 결손이 있음을 확인하였다. 뇌졸중 환자가 앉은 자세에서 환경의 변화에 적응하여 신체를 정위시키는 능력의 분석을 통해 뇌졸중 환자의 앉은 자세 조절의 문제점을 좀 더 명확히 이해할 수 있을 것으로 여겨진다.

• Journal of Korean Neurosurgical Society
• /
• 제60권5호
• /
• pp.577-583
• /
• 2017

Objective : Laminoplasty is an effective surgical method for treating cervical degenerative disease. However, postoperative complications such as kyphosis, restriction of neck motion, and instability are often reported. Despite sufficient preoperative lordosis, this procedure often aggravates the lordotic curve of the cervical spine and straightens cervical alignment. Hence, it is important to examine preoperative risk factors associated with postoperative kyphotic alignment changes. Our study aimed to investigate preoperative radiologic parameters associated with kyphotic deformity post laminoplasty. Methods : We retrospectively reviewed the medical records of 49 patients who underwent open door laminoplasty for cervical spondylotic myelopathy (CSM) or ossification of the posterior longitudinal ligament (OPLL) at Pusan National University Yangsan Hospital between January 2011 and December 2015. Inclusion criteria were as follows : 1) preoperative diagnosis of OPLL or CSM, 2) no previous history of cervical spinal surgery, cervical trauma, tumor, or infection, 3) minimum of one-year follow-up post laminoplasty with proper radiologic examinations performed in outpatient clinics, and 4) cases showing C7 and T1 vertebral body in the preoperative cervical sagittal plane. The radiologic parameters examined included C2-C7 Cobb angles, T1 slope, C2-C7 sagittal vertical axis (SVA), range of motion (ROM) from C2-C7, segmental instability, and T2 signal change observed on magnetic resonance imaging (MRI). Clinical factors examined included preoperative modified Japanese Orthopedic Association scores, disease classification, duration of symptoms, and the range of operation levels. Results : Mean preoperative sagittal alignment was $13.01^{\circ}$ lordotic; $6.94^{\circ}$ lordotic postoperatively. Percentage of postoperative kyphosis was 80%. Patients were subdivided into two groups according to postoperative Cobb angle change; a control group (n=22) and kyphotic group (n=27). The kyphotic group consisted of patients with more than $5^{\circ}$ kyphotic angle change postoperatively. There were no differences in age, sex, C2-C7 Cobb angle, T1 slope, C2-C7 SVA, ROM from C2-C7, segmental instability, or T2 signal change. Multiple regression analysis revealed T1 slope had a strong relationship with postoperative cervical kyphosis. Likewise, correlation analysis revealed there was a statistical significance between T1 slope and postoperative Cobb angle change (p=0.035), and that there was a statistically significant relationship between T1 slope and C2-C7 SVA (p=0.001). Patients with higher preoperative T1 slope demonstrated loss of lordotic curvature postoperatively. Conclusion : Laminoplasty has a high probability of aggravating sagittal balance of the cervical spine. T1 slope is a good predictor of postoperative kyphotic changes of the cervical spine. Similarly, T1 slope is strongly correlated with C2-C7 SVA.

• 한국전문물리치료학회지
• /
• 제20권1호
• /
• pp.18-27
• /
• 2013

The purpose of this study was to compare the ring lock type knee-ankle-foot orthosis (KAFO) with newly developed 4-bar linkage KAFO on the gait characteristics of persons with poliomyelitis clinically. This 4-bar linkage is the stance control type KAFO which provide the stability during stance phase and knee flexion during swing phase. Two subjects participated in this study voluntarily. We provided the customized 4-bar linkage KAFO then asked the subjects to walk in level surface and stairs under the two different KAFO conditions. The characteristics of gait in the persons with poliomyelitis were evaluated using a 3D motion analysis system and force plate. Additionally 6 minute walk test for physiological cost index were conducted using pulse oximeter to measure the energy consumption. In the results of this study, the differences of 4-bar linkage KAFO compared with ring lock type KAFO are as follows: (1) Walking speed, stride length, and step length on level increased in subjects, (2) The gait symmetry was improved by generated knee flexion and decreased pelvic external rotation on level and stairs walking, (3) Decreased vertical excursion of center of mass and pelvic elevation during swing phase was decreased on level, (4) Knee extension moment, hip flexion moment, hip and knee internal rotation moment of non-braced limb were decreased on level walking, (5) Walking speed in 6-minute walk test was increased and physiological cost index was decreased. These findings indicate that 4-bar linkage KAFO compared with ring lock type KAFO is effective in enhancing pattern, endurance, and energy consumption in level surface and stairs walking.

• 대한정형외과스포츠의학회지
• /
• 제3권1호
• /
• pp.66-72
• /
• 2004

목적: 후방 십자 인대 손상 환자의 포괄적 기능적 검사를 시행한 후 동일 조건의 정상인과 비교 분석함으로써 생체 내의 보상기전을 알아보고 향후 치료에 유용한 지침을 개발하는데 있다. 연구대상 및 방법: 10명의 후방 십자 인대 손상 환자와 10명의 정상 대조군을 대상으로 운동 범위, 후방 전위 검사, KT-1000을 이용한 후방 전위 검사, 텔로스 스트레스 및 30도 굴곡 전 체중 부하 방사선 검사, 보행 분석, 근전도 검사, 등 운동성 근력 검사 등을 시행하였다. 결과: 이학적, KT-1000, 텔로스 후방 전위 검사에서는 양군 간에 의미 있는 차이를 보였으나 30도 굴곡 전 체중 부하 방사선검사, 굴곡 및 신전건의 근력 검사에서는 차이가 없었다. 보행 시 후방십자인대 결손 군은 초기 착지 시 슬관절 굴곡을 더 적게 하고 입각기 시 슬관절 최대 외반 관성력은 감소하였다(p=0.027). 수직 착지 시 초기 접촉이 일어나는 순간 더 큰 족저 굴곡을 보이므로(p=0.014) 슬관절의 하중 부담을 감소시켰고(p=0.020) 근전도 검사 및 근력에서는 유의한 차이가 없었다. 결론: 후방 십자 인대 손상 후 환자들은 슬관절의 불안정 요소를 줄이고 충격을 최대로 흡수하는 보상 작용을 수행하여 훌륭한 임상적, 기능적 결과를 나타내며 향후 지속적인 연구가 필요하다.