• 한국정밀공학회지
• /
• 제9권4호
• /
• pp.147-153
• /
• 1992

This study was undertaken to investigate the cutting behaviour of super duralumin (A2024-T3) with sintered carbide tool(P20). The cutting test was carried out under different conditions such as cutting speed, cutting depth and rake angle, etc. The specific cutting force Kc and Kt of vertical and radial forces decreases as cutting speed increases, especially the decrease rate of Kt becomes larger than of Kc as cutting speed increases. Kc and Kt in small cutting depth are much affected by work-hardening of surface layer. The chip width and shear angle become layer as cutting depth increases, especially chip width at feed of 0.1mm almost approaches cutting width. Relation between the friction coefficient of chip side and tool rake angle side can make the modelization studying the built-up edge size. The shear angle model equation of super duralumin generally agree with theory of Ernst-Merchant.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 추계학술대회 논문집
• /
• pp.671-677
• /
• 1996

This paper proposes a study on the effects of motion errors for acceleration/ deceleration types. The proposed motion errors are consisted of two errors : one due to transient response of servomechanism and the other due to gain mismatching of positioning servo motor. They are derived from using laplace transformation for the block diagram of general purpose feed drive system. In order to minimize them, the paper proposes second order polynomial regression model by using orthogonal array method which describes one of experimental methodolgies. The validity and reliability of the study was veri lied on a vertical machining center equipped with FANUC 0MC through a series of experiments and analyses.

• 한국기계가공학회지
• /
• 제13권4호
• /
• pp.28-35
• /
• 2014

A composite honeycomb core is widely used for lightweight aircraft materials. However, the composite honeycomb core coupled with metal-cutting machining processes does not make a very good match. This paper describes an experimental study of the shape-machining characteristics of a composite honeycomb core, in which a five-axis gantry machine is used. The experimental conditions of the offset allowance, tooling condition and feed rate were applied. The shape machining characteristics of a flat surface, a vertical surface, and a concave surface are evaluated by comparing the machining shape and burr characteristics.

• 농업과학연구
• /
• 제18권2호
• /
• pp.127-139
• /
• 1991

1. The purpose of this study was to recommend ways of more efficient pheasant farm business management and promoting the demand of pheasant foods by reviewing the current pheasant farm business management and the general pattern of consumption of pheasant foods. The study was conducted on the basis of the field survey covering 83 pheasant feeders and 283 consumers. 2. Majority of pheasant feeders, 86.8%(n=72), utilized broiler feed for pheasant rearing because of high price of exclusive pheasant feed. 3. In case of producing 1,000 heads of 5 month-old pheasant, the primary production cost per head was roughly calculated at about 5,530 Won. And 40.3% of primary production cost was consisted of feed cost and 12.9% was depreciation cost for facillities including artificial incubator equipments. 4. 81.1%(n=51) of whole surveyed feeders disposed of 1-4 week-old birds directly to the new feeders and 6%(n=6) sold them to the middlemen who were almost pioneering pheasant feeders. 5. 48.9%(n=138) of the surveyed consumer respondents have taken the pheasant foods once and several times, and the others never once. And 50.6%(n=69) of the respondents who had taken the pheasant foods were satisfied with the tastes. 6. The surveyed consumers were asked whether they knew the nutritional value of pheasant foods and 47.3(n=136) recognized it positively and 37.5%(n=106) negatively. 7. To increase the pheasant farm income and promote the demand of pheasant foods. followings are recommended. - Production cost should be reduced by cooperative utilization of facilities and equipments at farm level, and exclusive pheasant feed of good quility should be developed and supplied to the feeders at a low price. - Pheasant marketing and pricing system should be improved to prevent consumers from price disorder of retail shop including pheasant food reataurants and to popularize the pheasant foods. - Various type of menu of pheasant foods should be developed not only to satisfy consumers in tastes but also to solve the seasonality of pheasant supply. But it is preferable that this action is led by pheasant feeders and their cooperative organization, espectially through vertical intergration system owned by pheasant feeders. - Generic, pioneering advertisement and promotion should be carried out to promote primary demend of pheasant foods. It would be preferable that these primary demend advertising and promoting activities shuld be sponsored by pheasant feeders and government together. And their activities should be supported by institutional regulation.

• Journal of Positioning, Navigation, and Timing
• /
• 제6권4호
• /
• pp.211-221
• /
• 2017

Ellipsodially referenced survey (ERS) is considered as one of the challenging issues in the hydrographic surveys due to the fact that the bathymetric data collected by this technique can be readily transformed either to the geodetic or the chart datum by application of some geoscientific models. Global Navigation Satellite Systems (GNSS) is a preferred technique to determine the ellipsoidal height of a vessel reference point (RP) because it provides cost-effective and unprecedentedly accurate positioning solutions. Especially, the GNSS-derived heights include heave and dynamic draft of a vessel, so as for the reduced bathymetric solutions to be potentially free from these corrections. Although over the last few decades, differential GNSS (DGNSS) has been widely adopted in the bathymetric surveys, it only provides limited accuracy of the vertical component. This technical barrier can be effectively overcome by adopting the so-called GNSS carrier phase (CPH) based techniques, enhancing accuracy of the height solution up to few centimeters. From the positioning algorithm standpoint, the CPH-based techniques are categorized under absolute and relative positioning in post-processing mode; the former is precise point positioning (PPP) correcting errors by the global or regional models, the latter is post-processed kinematic positioning (PPK) that uses the differencing technique to common error sources between two receivers. This study has focused on assessment of achievable accuracy of the ellipsoidal heights obtained from these CPH-based techniques with a view to their applications to hydrographic surveys where project area is, especially, few tens to hundreds kilometers away from the shore. Some field trials have been designed and performed so as to collect GNSS observables on static and kinematic mode. In this paper, details of these tests and processed results are presented and discussed.

• 한국정보전자통신기술학회논문지
• /
• 제2권2호
• /
• pp.69-77
• /
• 2009

위성방송수신 및 위성 양방향 인터넷, VSAT 등의 위성통신서비스를 차량 이동시에도 이용할 수 있기 위해서는 차량에 탑재하기 용이하도록 소형이며 높이가 낮은 안테나 구조가 요구된다. 또한 중위도 지역에서 평면 안테나 상태로 45도 빔틸트 특성을 갖고, Ka 밴드의 위성통신용으로 충분한 고이득을 얻기 위해, 빔폭이 좁고 사이드로브가 적으며 저손실 구조의 배열안테나 개발이 필요하다. 본 논문에서는 이러한 성능을 만족시키기 위해, 진행파형 누설파 모드를 기초로 한 도파관 종방향 슬롯 배열안테나를 제안하였으며, 특히 슬롯 배열들 각각의 폭을 조절하여 복사 전력을 제어함으로써 복사 패턴의 사이드로브 레벨을 저감시켰다. 32개 누설파 소자의 배열안테나 이득은 34 dBi 였으며, 빔폭은 3.6도, 사이드로브 레벨은 -25 dB 이하로 기존의 경우보다 약 8 dB 의 저감 개선효과를 얻었다. 중심주파수 20.0 GHz에서 빔틸트 각도는 43도를 얻었다. 급전선로는 도파관의 코퍼레이트 급전방식으로 설계하여 광대역, 저손실 특성을 얻을 수 있었다.

• 한국해양공학회지
• /
• 제35권5호
• /
• pp.313-326
• /
• 2021

A submerged body with varied control inputs can execute large drift angles and large angles of attack, as well as basic control such as straight movement and turning. The objective of this study is to analyze the dynamic characteristics of a submerged body comprising six thrusters and six control planes, which is capable of a large drift angle and angle of attack motion. Virtual captive model tests via were analyzed via computational fluid dynamics (CFD) to determine the dynamic characteristics of the submerged body. A test matrix of virtual captive model tests specialized for large-angle motion was established. Based on this test matrix, virtual captive model tests were performed with a drift angle and angle of attack of approximately 30° and 90°, respectively. The characteristics of the hydrodynamic force acting on the horizontal and vertical surfaces of the submerged body were analyzed under the large-angle motion condition, and a model representing this hydrodynamic force was established. In addition, maneuvering simulation was performed to evaluate the standard maneuverability and dynamic characteristics of large-angle motion. Considering the shape characteristics of the submerged body, we attempt to verify the feasibility of the analysis results by analyzing the characteristics of the hydrodynamic force when the large-angle motion occurred.

• Journal of Computational Design and Engineering
• /
• 제1권2호
• /
• pp.128-139
• /
• 2014

This study investigates the effects of machining parameters as they relate to the quality characteristics of machined features. Two most important quality characteristics are set as the dimensional accuracy and the surface roughness. Before any newly acquired machine tool is put to use for production, it is important to test the machine in a systematic way to find out how different parameter settings affect machining quality. The empirical verification was made by conducting a Design of Experiment (DOE) with 3 levels and 3 factors on a state-of-the-art Cincinnati Hawk Arrow 750 Vertical Machining Center (VMC). Data analysis revealed that the significant factor was the Hardness of the material and the significant interaction effect was the Hardness + Feed for dimensional accuracy, while the significant factor was Speed for surface roughness. Since the equally important thing is the capability of the instruments from which the quality characteristics are being measured, a comparison was made between the VMC touch probe readings and the measurements from a Mi-tutoyo coordinate measuring machine (CMM) on bore diameters. A machine mounted touch probe has gained a wide acceptance in recent years, as it is more suitable for the modern manufacturing environment. The data vindicated that the VMC touch probe has the capability that is suitable for the production environment. The test results can be incorporated in the process plan to help maintain the machining quality in the subsequent runs.

• 유기물자원화
• /
• 제23권1호
• /
• pp.38-44
• /
• 2015

본 연구에서는 저온 해양성 미세조류인 Nannochloropsis sp.를 대상으로 (주)아이엠비즈에서 개발한 수직형 고효율 광배양기를 통한 생산성 평가를 목적으로 2톤의 배양액으로 자가영양의 옥외생장실험을 진행하였다. 한달간 진행된 실험에서, 0.1%의 $CO_2$를 주입한 배양에서는 일평균 0.953g/L의 생산성을 나타냈으며, 공기만을 주입했을 경우에는 0.574g/L의 생산성을 나타냈다. 온도의 분포는 최저 $20^{\circ}C$에서 최고 $31^{\circ}C$에 이르렀으며, 이 범위에서 온도에 따른 생산성의 변화는 크게 차이가 없는 것으로 나타났다. 빛의 세기는 최저 5,000럭스에서 최고 4만 럭스 내외로 조사되었으며, 빛의 세기와 미세조류의 생장사이에 매우 밀접한 관련이 있는 것으로 밝혀졌다. 한편, 본 실험에서 시도된 개발된 배양기를 통한 가압부상에 의한 조류의 수확방법은 효과가 매우 높은 것으로 나타났다.

• 대한추나의학회지
• /
• 제4권1호
• /
• pp.75-88
• /
• 2003

Objectives : The purpose of this study is to find out the effects of Catalpa Ovata on the collagen-induced arthritis in the lewis rats. and we infere the effects of Catalpa Ovata on the rheumatoid arthritis in the human body. Methods : We investigated the effect of Catalpa Ovata on the Collagen-induced arthritis in Lewis rats via morphology, histology and serology as an experimental group, a control group, and a normal group. We feed Catalpa Ovata. only to an experimental group. Results : According to this research, the abnormal finding In Moire topography was 53.7% (1,018 students), and students needed X-ray re-examination were 11.2% (213 students). Students diagnosed scoliosis by X-ray re-examination were 1.8%. According to statistical analysis, interval between vertical base line of pelvis and vertical base line of neck, gap between left distance and right distance to the vertical base line of pelvis and difference of contour lines have strong correlations with deformity degree of the body surface examined by Moire. Conclusions : 1. The weight of an experimental group were lower than control group with statistically significant at 15 days later. 2, The paw edema volume of an experimental group were lower than control group at 10 days, 15 days later. but couldn't be found meaning. 3. The size of the tarsal joint of an experimental group were lower than control group at 5 days, 10 days, 15 days later, but couldn't be found meaning. 4. The volume of tumor necrosis factor-a at an experimental group were lower than control group with statistically significant. 5. The volume of interleukin-$1{\beta}$ at an experimental group were lower than control group with statistically significant. 6. An experimental group and a control group were showed ankylosing osteoarthritis, but an experimental group compared with a control group, alleviated In the fibrous ankylosis, destruction of articular cartilage and destruction of subchondral bony tissue. According to the above results, it might be considered that Catalpa Ovata has the suppression of the advance of the Collagen-induced arthritis and that result were presumed to bo connected with suppression of volume of the tumor necrosis $factor-{\alpha}$ and $interleukin-1{\beta}$ in the blood.