• PNF and Movement
• /
• 제13권3호
• /
• pp.135-143
• /
• 2015

Purpose: The purpose of this study was to assess the effect of the proprioceptive neuromuscular facilitation (PNF) relaxation technique (hold relax; HR, contract relax; CR) and static stretch (SS) on hamstring flexibility and vertical jump performance in healthy adults over a four-week period. Methods: Twenty-four healthy adults volunteered to participate in PNF and static stretch sessions. The subjects were divided into three groups as follows: 8 subjects in the SS group, 8 subjects in the HR group, and 8 subjects in the CR group. In the HR and CR groups, contractions lasted 15 seconds per trial and consisted of 5 sets of 15 seconds of hamstring contraction immediately followed by 15 seconds of passive static hamstring stretching. For the static group, the participants were asked to stretch by hanging a leg over a table for 30 seconds. Subjects in all groups performed the exercises three days per week for 4 weeks. The active straight leg raising (ASLR) test, active knee extension (AKE) test, and vertical jump test were performed before the intervention and after 1, 2, and 4 weeks. Results: The SS, HR, and CR techniques effected positive improvement in hamstring flexibility and vertical jump performances but neither of the stretching methods had any statistically significant different effects according to group, although there were interactions (between group and time) in the ALSR group from 1 week to 2 week and in the AKE test from pretest to 1 week. Conclusion: Based on the results of the current study, SS, HR, and CR were shown to affect hamstring flexibility and vertical jump performance in healthy adults. In particular, it was determined that within a short period, hamstring flexibility could be attributed more to CR than to SS.

• The Journal of Advanced Prosthodontics
• /
• 제13권2호
• /
• pp.79-88
• /
• 2021

Purpose. To assess peri-implant stress distribution using finite element analysis in implant supported fixed partial denture with occlusal schemes of cuspally loaded occlusion and implant protected occlusion. Materials and methods. A 3-D finite element model of mandible with D2 bone with partially edentulism with unilateral distal extension was made. Two Ti alloy identical implants with 4.2 mm diameter and 10 mm length were placed in the mandibular second premolar and the mandibular second molar region and prosthesis was given with the mandibular first molar pontic. Vertical load of 100 N and and oblique load of 70 N was applied on occlusal surface of prosthesis. Group 1 was cuspally loaded occlusion with total 8 contact points and Group 2 was implant protected occlusion with 3 contact points. Results. In Group 1 for vertical load, maximum stress was generated over implant having 14.3552 Mpa. While for oblique load, overall stress generated was 28.0732 Mpa. In Group 2 for vertical load, maximum stress was generated over crown and overall stress was 16.7682 Mpa. But for oblique load, crown stress and overall stress was maximum 22.7561 Mpa. When Group 1 is compared to Group 2, harmful oblique load caused maximum overall stress 28.0732 Mpa in Group 1. Conclusion. In Group 1, vertical load generated high implant stress, and oblique load generated high overall stresses, cortical stresses and crown stresses compared to vertical load. In Group 2, oblique load generated more overall stresses, cortical stresses, and crown stresses compared to vertical load. Implant protected occlusion generated lesser harmful oblique implant, crown, bone and overall stresses compared to cuspally loaded occlusion.

• 한국지반공학회논문집
• /
• 제34권1호
• /
• pp.47-57
• /
• 2018

최근, 수직증축을 통한 공동주택의 리모델링은 제한된 부지 내에서 세대수를 증가시킬 수 있다는 장점으로 인해 그 수요가 증가하고 있다. 수직증축시 기초보강의 가장 큰 목적은 증축되는 층고로 인해 발생하는 추가하중을 지지하는 것이다. 단, 추가된 하중의 일부가 보강말뚝이 아닌 기존말뚝에도 가해지기 때문에, 기존말뚝의 허용지지력을 초과하지 않는 범위 내에서만 증축이 가능하다. 선재하공법은 수직증축 시공 전 단계에서 기존말뚝에 가해지던 하중 중 일부를 보강말뚝에 분담하도록 하여, 증축하중이 추가되어도 기존말뚝의 허용지지력을 초과하지 않도록 하며, 선재하 하중에 의해 보강말뚝의 침하를 미리 발생시켜 증축하중이 가해졌을 때 보강말뚝의 지지력을 빨리 발현시키는 공법이다. 본 연구에서는 3차원 수치해석을 통해 선재하공법의 효과를 분석하였다. 3D FEM 프로그램인 PLAXIS 3D를 활용하여 수직증축 리모델링시 기초보강을 모델링하고 선재하공법의 적용 유무에 따른 효과를 비교 분석하였다. 수치해석 결과 선재하공법을 적용하였을 때 기존말뚝에 가해지던 하중을 보강말뚝에 더욱 효과적으로 분담하였으며, 보강말뚝의 지지력이 조기에 발현하는 데 효과가 있는 것으로 확인하였다.

• 한국지반공학회논문집
• /
• 제36권8호
• /
• pp.61-72
• /
• 2020

수직증축 리모델링시 상부 구조물의 구조적 안정성 확보를 위해서는 기초의 안정성이 우선적으로 확보되어야 한다. 수직증축형 리모델링 구조기준 고시(2014)에 따라, 수직증축시 기존 말뚝과 보강 말뚝의 강성에 따라 상부 하중을 분담하여 지지한다. 하지만, 국내에서는 증축시 활용할 수 있는 기초 보강공법 등에 대하여 연구 주제가 집중되어 있으며, 기존 기초와 보강 기초의 강성 차이에 의한 하중 분담율에 대한 연구는 미비하다. 따라서, 본 연구에서는 현장 재하시험을 통해 수직증축 리모델링시 기존 말뚝과 보강 말뚝의 강성에 따른 하중 분담 거동에 대하여 분석을 수행하였다. 서로 강성이 다른 일반 및 파형 마이크로파일을 시공하여 기존 말뚝과 보강 말뚝을 모사하고, 각각의 말뚝에 대한 재하시험을 수행하여 각 말뚝의 강성을 산정하였다. 그 후, 기존 말뚝과 보강 말뚝 두부를 연결하는 기초판을 타설하고 기초판 상부에 하중을 재하함으로써 기존 말뚝 및 보강 말뚝의 강성 차이에 따른 하중 분담 거동을 분석하였다. 그 결과, 파형 마이크로파일의 강성이 일반 마이크로파일에 비해 약 2.5배 크게 산정되었으며, 이에 비례하여 하중을 분담하는 것을 확인하였다.

• 한국화재소방학회:학술대회논문집
• /
• 한국화재소방학회 2008년도 추계학술논문발표회 논문집
• /
• pp.283-288
• /
• 2008

Since installing a balcony can significantly reduce the spread of fire, fire spread to the upper levels was confirmed, comparing the cases with and without balcony extension. It was confirmed that the fire can spread not only to the next higher level but also to two levels higher due to the outburst of flame which reached a significant temperature in the case without balcony, while the possibility of fire spread to the upper level reduced considerably with the balcony. this study is compared and analyzed to vertical diffusion appearance of an externally venting flame. An installed balcony is also applied to fire test 6.54kW to analyze about effect of a balcony.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 D
• /
• pp.1991-1992
• /
• 2006

this paper is described the Vortical Mobile Robot problem which can be generated a lot of error like gravity, mobile error between main control system of robot and application program and solution which is installed RTX( Real Time Extension ) Kernel to Embedded XP of main control board because it needs to guarantee real time between the main control board of robot and the motion drive board and to develop the remote operation system for real time robot control also in case The Vertical Mobile Robot that needs fast and stable motile control so it is proposed a guaranteed real time system

• 한국항해항만학회지
• /
• 제41권5호
• /
• pp.337-344
• /
• 2017

In the offshore crane system, the requirements on the operating safety are extremely high due to many external factors. Rope extension is one of the factors producing vertical vibration of load. In this study, the load is carried by the motor-winch actuator control and the rope is modeled as a mass-damper-spring system. To control the load position and suppress the vertical vibration of the load, a control system based on input-output linearization method is proposed. By the simulation and experiment results with pilot crane model, the effectiveness of proposed control method is evaluated and verified.

• 국제초고층학회논문집
• /
• 제11권2호
• /
• pp.137-144
• /
• 2022

As one of the most important vertical transportation equipment in super high-rise buildings, the construction elevator directly affects the project period, cost, and effectiveness. The paper proposes a new construction elevator with single-guide rail and multi-cages. It can solve the problems of single construction elevator capacity shortage and efficacy decrease with height reduction, the occupancy of plan and elevation position of multiple construction elevators, and extension of total construction period by cycling operation of multi-cages on a single-guide rail. The paper focuses on the design and research of the main components of the equipment, such as the rotating guide rail mechanism, vertical bearing mast tie system, segmented electrical power supply system, group control scheduling system, and safety anti-collision system.

• KIEAE Journal
• /
• 제11권5호
• /
• pp.55-67
• /
• 2011

The purpose of this research is to find applicable design characteristics and methods of communal spaces in vertical urban multi-family housing. With this goal, several overseas' multi-family housing projects are selected and their communal spaces are identified. The design characteristics of the communal spaces are analyzed with a special focus on the territories such as an individual unit boundary, building interior and exterior boundary. In terms of the framework for analysis, territoriality, openness, and unique characteristics are reviewed. As a result, the communal spaces are created using various spatial composition methods such as addition, subtraction, connection, extension, accumulation, and isolation. The communal space programs are integrated in plans and sections throughout the buildings. Visual openness and connection with surrounding urban environments are articulated by void spaces, transparent and translucent building materials, green spaces, and applications of graphical images. Communal identities and aesthetics are emphasized by unique building forms and space arrangements. The uses of finish materials, colors, objects, and images add strong characters to the communal spaces. For a further research, it is necessary to combine a design method study with residents' behaviors and community interactions.

• 대한임상전기생리학회지
• /
• 제2권1호
• /
• pp.71-82
• /
• 2004

To compare the effectiveness of the hemisling, bobath sling, extension-type sling, and the newly designed Modified Triangular Bobath Sling with Distal Support on a hemiplegic shoulder subluxation. Fourteen hemiplegic patients with shoulder subluxation were evaluated by a simple X-ray with and without the slings and the vertical and horizontal distances on the plain AP views were measurement. The newly designed arm sling was compared in terms of the effects of correction with distal support attached with shoulder saddle sling. The arm sling designed for this study was developed for the purpose of maintaining patients hands in a functional position and performing ROM exercise of the shoulder easily, and prevention or correction to shoulder subluxation. The mean values of the vertical and horizontal distance were compared to determine if there was significant difference of function between the new sling and the conventional slings. The new sling provided the patients with good vertical correction of the subluxation(p<0.05) but did not increase the horizontal distance significantly. These results support the effectiveness of a new sling to decrease subluxation in hemiplegia. Further study on the long term effects or complication of the new sling is recommended.