• 수산해양기술연구
• /
• 제47권2호
• /
• pp.146-152
• /
• 2011

Underwater CCTV camera systems are increasingly replaced the traditional net approach of assessing the species, numbers and aggregation patterns of marine animals distributing around the artificial reefs installed in the inshore fishing grounds, in particular, in relation to the biological investigation of behavior and distribution patterns of target fishes. In relation to these needs, we developed a multi-directional underwater CCTV camera system to use in detecting and tracking marine animals in the artificial reef ground. The marine targets to be investigated were independently tracked by using a camera module toward the bottom and four camera modules installed in the interval of $90^{\circ}$ in horizontal plane and inclination of $45^{\circ}$ in vertical plane of the CCTV system without the overlap of video frames by each camera module. From the results of several field tests at sea, we believe that the developed multi-directional underwater CCTV camera system will contribute to a better understanding in evaluating the effect of artificial reefs installed in the inshore fishing grounds.

• Nuclear Engineering and Technology
• /
• 제31권1호
• /
• pp.29-48
• /
• 1999

Local two-phase flow parameters of subcooled flow boiling in inclined annulus were measured to investigate the effect of inclination on the internal flow structure. Two-conductivity probe technique was applied to measure local gas phasic parameters, including void fraction, vapor bubble frequency, chord length, vapor bubble velocity and interfacial area concentration. Local liquid velocity was measured by Pilot tube. Experiments were conducted for three angles of inclination; 0$^{\circ}$(vertical), 30$^{\circ}$, 60$^{\circ}$. The system pressure was maintained at atmospheric pressure. The range of average void fraction was up to 10% and the average liquid superficial velocities were less than 1.3 m/sec. The results of experiments showed that the distributions of two-phase How parameters were influenced by the angle of channel inclination. Especially, the void fraction and chord length distributions were strongly affected by the increase of inclination angle, and flow pattern transition to slug flow was observed depending on the How conditions. The profiles of vapor velocity, liquid velocity and interfacial area concentration were found to be affected by the non-symmetric bubble size distribution in inclined channel. Using the measured distributions of local phasic parameters, an analysis for predicting average void fraction was performed based on the drift flux model and flowing volumetric concentration. And it was demonstrated that the average void fraction can be more appropriately presented in terms of flowing volumetric concentration.

• 한국농촌건축학회논문집
• /
• 제14권2호
• /
• pp.67-74
• /
• 2012

This study investigated that grasped the present state of high-rise apartment on Urban Street color, through the color image estimation effect of primary factor on color image preference. The range of study were high-rise apartment on Urban Street color of land for housing, Sangmu, Woonnam, Shinchang, Pungam, Ilgok, Moonheung district. The method of study put out a model of reference after photography a spot colorimeter BIB test. And the data analyzing was factor analysis, multi regression through Semantic Differential Method, questionnaire. The result of study, the present state of color was used predominate, support color is YR, Y, and stress color is YR, R. Predominate color showed distribution of high luminosity, low freshness and assistance, stress color is middle luminosity, low freshness. And effects of primary factor on color image preference were 'unification', 'comfortableness', 'sophistication'. The result of this study showed that need high luminosity color for comfortableness to improve of high-rise apartment on Urban Street color, harmony of color, harmony of vertical horizontality color scheme pattern, consult square rate of stress color.

• 한국의류산업학회지
• /
• 제25권5호
• /
• pp.615-625
• /
• 2023

This study aimed to analyze the characteristics of the lower-body shape of middle-aged males with abdominal obesity by type and consider dimensional distribution to present a suit-pants size. The criteria were having a waist circumference greater than 90 cm and a waist-to-hip ratio(WHR) greater than 0.90; a total of 566 middle-aged males were surveyed. The findings revealed that, first, compared to standard lower-body types, the average body size of abdomenobese middle-aged males was significantly larger, especially in the horizontal area than in the vertical ares. Second, through a cluster analysis, a total of three categories of abdominal obesity were defined: small oval, large cylinder, and trapezoid type. The coverage rates of each type were 93.8%, 75.9%, and 93.0%, respectively. Finally, the suit-pants size system established according to lower-body types indicated the basic body size and reference body size were different for each type and also for the KS K 0050 male adult's garments size system. According to the definition of abdominal obesity, the types of abdominal obesity and the dimensions of each area are different, even if they belong to the same obesity group, suggesting that it is necessary to develop a pattern based on the analysis of obesity types.

• 구강회복응용과학지
• /
• 제26권2호
• /
• pp.179-195
• /
• 2010

임플란트 보철물에 저작력 등 외부 하중이 작용하면 내부 반응으로 응력이 발생되는데 지지골에 나타난 응력은 골재생 및 흡수 파괴, 임플란트에 나타난 응력은 임플란트 자체의 파절이나 나사의 풀림현상 및 파절, 상부 구조물에 나타난 응력은 보철물의 파절 등을 예견하는 지침이 될 수 있을 것이다. 지대주의 형상과 재질에 따라 연결방법과 보철방법이 달라지고 임플란트 내부의 하중전달 기전이 변하게 되고 이에 따라 악골에 발생하는 응력분포 역시 달라질 수 있다. 본 연구에서는 하악 제 1대구치 부위에 이중나사 구조를 갖고 원추형 내측연결 임플란트 시스템인 GSII$^{(R)}$ (Osstem, Korea)임플란트를 이용해 지대주의 종류를 티타늄 소재의 2-piece Transfer$^{TM}$ abutment (GST), 금합금 소재의 2-piece GoldCast$^{TM}$ abutment(GSG), 외부 연결형태를 가진 3-piece Convertible$^{TM}$ abutment (GSC) 로 분류하여 이에 따른 응력분포 양상을 비교 분석하여 보았다. 결과 하중조건에 관계없이 응력은 주로 지대주와 고정체가 접촉하는 경부에 집중되었다. 또한 하중조건에 관계없이 임플란트의 고정체 상부와 접촉하는 치밀골에 높은 응력이 나타나고 해면골에는 아주 작은 응력이 나타났다. 축하중보다는 중심축을 벗어난 하중조건에서 더 높은 응력이 발생되었고 수직하중보다 경사하중에서 더 높은 응력이 발생되었다. 전체에 걸친 최대응력은 GSG에서는 지대주, 치관 및 고정체에 고르게 분포되었고 GST는 주로 고정체와 지대주 나사에, GSC는 고정체와 지대주에 집중되었다. 세 지대주 간 골내의 최대응력에는 유의한 차이가 없었고 GSG가 전체 구성부의 응력분포에 있어 유리한 것으로 나타났다.

• 환경영향평가
• /
• 제23권2호
• /
• pp.119-136
• /
• 2014

This work aims to select the potentially vulnerable plant species against climate change at alpine and subalpine belts of Mts. Sorak, Jiri, and Halla, from central, southern, southern insular high mountains of the Korean Peninsula, respectively. The selection of global warming related vulnerable plants were performed by adapting various criteria, such as flora, endemicity, rarity, floristically specific and valuable species, species composition at mountain summits, horizontal and vertical ranges of individual species, and their distributional pattern in the Korean Peninsula. Line and quadrat field surveys along the major trails from all directions at height above 1,500 meters above sea level of Mts, Sorak, Jiri and Halla were conducted each year during spring, summer, and autumn from 2010 to 2011. Based upon above mentioned eight criteria, high level of climate change related potentially vulnerable arboral plants, such as Rhododendron aureum, Taxus caespitosa, Pinus pumila, Oplopanax elatus, Vaccinium uliginosum, and Thuja koraiensis are noticed from at subalpine belt of Mt. Sorak. Species of Abies koreana, Rhododendron tschonoskii, Oplopanax elatus, Taxus cuspidata, Picea jezoensis, and Juniperus chinensis var. sargentii belong to climate change concerned vulnerable species at subalpine belt of Mt. Jiri. High level of climate change related species vulnerability is found at alpine and subalpine belts of Mt. Halla from Diapensia lapponica var. obovata, Salix blinii, Empetrum nigrum var. japonicum, Vaccinium uliginosum, Juniperus chinensis var. sargentii, Taxus cuspidata, Rhamnus taquetii, Abies koreana, Hugeria japonica, Prunus buergeriana, and Berberis amurensis var. quelpartensis. Countermeasures to save the global warming vulnerable plants in situ are required.

• 한국경제지리학회지
• /
• 제8권2호
• /
• pp.217-236
• /
• 2005

최근 지역발전 이론이나 정책 수단에서 클러스터나 혁신체제가 강조되면서 연계 혹은 네트워크에 대한 관심이 높아지고 있다. 그런데 우리나라 주력 산업들은 대부분 완제품을 생산하는 핵심 대기업과 여기에 부품을 납품하는 중소기업들 사이의 생산 연계 관계가 클러스터나 혁신체제의 핵심 구조를 이루고 있기 때문에 정책의 성공을 위해서라도 대기업과 관련 중소기업들 사이의 연계 관계에 대한 분석이 중요하다. 본 연구에서는 현재 우리나라의 주력 산업인 반도체 부분을 대상으로, 이 산업의 선도 대기업인 삼성전자와 관련 협력업체들의 연계 관계를 살펴보았다. 본 연구의 결론을 요약하면 다음과 같다. 삼성전자 협력업체들은 수도권에 집중되어 밀집된 생산 연계를 구축하고 있는데, 이는 삼성전자 사업장과의 근접성이라는 요인에 덧붙여, 수도권이 지닌 다양한 입지 경쟁력 때문이다. 또한 삼성전자와 협력업체들 사이의 관계는 여전히 수직적 지배종속관계의 성격이 강한 편으로서 향후 수평적 협력관계로 전환해야 하는 과제를 안고있다.

• 환경생물
• /
• 제24권1호
• /
• pp.67-80
• /
• 2006

환경특성이 초미소 식물플랑크톤의 분포에 미치는 영향을 파악하기 위해 서태평양의 열대와 아열대 수역(TSWP)과 동해에서 2002년 9월 조사를 하였고, 동중국해 대륙붕수역 (C-ECS)은 2003년 8월에 조사를 수행하였다. 초미소 식물플랑크톤은 flow cytometry 방법을 이용 Synechoroccus, Prorhlorococcus 그리고 picoeukaryotes의 3개체군으로 구분 계수하였다. 물리화학적 환경이 상이한 3곳의 조사수역 별로 초미소 식물플랑크콘들의 수직분포, 100m 수심까지 적분된 풍도를 비교하였다. 분석결과 synechococcus와 Prochlorococcus의 적분된 개체수는 3곳의 조사수역에서 서로 상반되는 결과를 보였다. Synechococcus는 TSWP에서 정점평균 $84.5X10^{10}\;cells\;m^{-2}$의 풍도를, C-ECS에서 $305.6X10^{10}\;cells\;m^{-2}$를 동해에선 $124.5X10^{10}\;cells\;m^{-2}$의 풍도를 보여 영영염이 풍부한 지역에서 풍도가 증가하는 경향을 보였다. 이에 반해 Prochlorococcus는 빈 영양 환경의 TSWP에서 $504.5X10^{10}\;cells\;m^{-2}$의 가장 높은 풍도를 보였으며, 영양염 환경이 양호한 C-ECS에서 낮은 풍도를 보이는 독특한 분포양상을 나타냈다. Picoeukaryotes는 Synechococcus와 유사한 지역적 변화를 보였으나 풍도는 약 1/10정도를 나타냈다. Synechococcus와 picoeukaryotes는 모든 정점에서 출현한 반면 Prochlorococcus는 일반적으로 C-ECS와 동해의 저염 환경에서 출현하지 많았다. Synechococcus와 Prochlorococcus의 수층별 평균 풍도의 수직분포는 표면 혼합층에서 유사한 수준을 보이다 이심에서 급격한 감소를 나타냈다. 그러나 TSWP에선 풍도의 급격한 감소가 나타나지 많고 100 m 수심까지 높은 풍도를 나타냈다. Picoeukaryotes는 C-ECS에서 100 m까지 유사한 수준의 풍도를 보였으며, 동해의 $20\sim30\;m$ 수심에선 최대 풍도층이 나타났다.

• 대기
• /
• 제25권4호
• /
• pp.611-622
• /
• 2015

Heavy rainfall ($>30mm\;hr^{-1}$) over the Korean Peninsula is examined in order to understand thermo-dynamic characteristics of the atmosphere, using radiosonde observational data from seven upper-air observation stations during the last 17 years (1997~2013). A total of 82 heavy rainfall cases during the summer season (June-August) were selected for this study. The average values of thermo-dynamic indices of heavy rainfall events are Total Precipitable Water (TPW) = 60 mm, Convective Available Potential Energy (CAPE) = $850J\;kg^{-1}$, Convective Inhibition (CIN) = $15J\;kg^{-1}$, Storm Relative Helicity (SRH) = $160m^2s^{-2}$, and 0~3 km bulk wind shear = $5s^{-1}$. About 34% of the cases were associated with a Changma front; this pattern is more significant than other synoptic pressure patterns such as troughs (22%), migratory cyclones (15%), edges of high-pressure (12%), typhoons (11%), and low-pressure originating from Changma fronts (6%). The spatial distribution of thermo-dynamic conditions (CAPE and SRH) is similar to the range of thunderstorms over the United States, but extreme conditions (supercell thunderstorms and tornadoes) did not appear in the Korean Peninsula. Synoptic conditions, vertical buoyancy (CAPE, CIN), and wind parameters (SRH, shear) are shown to discriminate among the environments of the three types. The first type occurred with high CAPE and low wind shear by the edge of the high pressure pattern, but Second type is related to Changma front and typhoon, exhibiting low CAPE and high wind shear. The last type exhibited characteristics intermediate between the first and second types, such as moderate CAPE and wind shear near the migratory cyclone and trough.

• 대한치과보철학회지
• /
• 제35권3호
• /
• pp.517-534
• /
• 1997

It has been held that excessive mechanical forces to the osseous and soft tissues of the TMJ result in joint dysfunction. Understanding the stress pattern on TMJ is very important in TMJ research. But, it is very difficult to measure directly the biomechanical stress distribution in the TMJ when the mandible is loaded. Therefore, stress distribution in the TMJ during functional movement was studied through animal experiment or mathematical model. It was observed and compared the stress distribution occuring in the working and balancing condyle when lower right canine, lower right first molar and lower right second molar were clenched by the three dimensional finite element analysis. Also, stress distribution in the working and balancing condyles were observed and compared when $20^{\circ}$ forward and buccal bite forces were applied to the first molar. The results were as follows : 1. Stress distribution in the condyles during unilateral clenching of the first molar, second molar, canine showed no difference. In the working condyle, tensile force was concentrated on the lateral aspect of the condylar articular surface and condylar neck. And compressive force was concentrated on the anteromedial and lateral aspect of condyle. In the balancing condyle, tensile and compressive forces were concentrated on the lateral aspect of the condylar articular surface and stress transmission to the temporal bone was not observed. 2. When lateral forces were applied to the first molar, tensile forces were concentrated on the medial aspect of the condylar neck and condylar posterior surface in working and balancing condyle. Compressive force was concentrated on the anteromedial and lateral surface of the condyle and stress transmission to the temporal bone was not observed. 3. During unilateral clenching, stress in the working condyle decreased as the occlusal load moved posteriorly while the stress in the balancing condyle increased. when lateral force was applied to first molar, the incremental amount of stress was greater than vertical load. 4. During unilateral clenching, the average balancing/working condyle stress ratio was 2.52. There was a greater concentration of stress in the balancing condyle. The ratio increased as the occlusal load moved posteriorly and decreased considerably when lateral forces were applied to the first molar.