• 제목/요약/키워드: Vertical dimension increase

Search Result 99, Processing Time 0.034 seconds

Full mouth rehabilitation with vertical dimension increase in patient with severely worn out dentition (과도한 마모를 가진 환자의 수직 고경 증가를 동반한 전악수복 증례)

  • Jung, Ji-Hye
    • The Journal of the Korean dental association
    • /
    • v.54 no.6
    • /
    • pp.438-446
    • /
    • 2016
  • Severe tooth wear may cause the pathologic change of the TMJ and masticatory muscles, unesthetic facial appearance, pathogenic pulp and occlusal disharmony. Treating patients with severely worn dentition often requires full mouth rehabilitation with increasing vertical dimension. Proper diagnosis and treatment planning are important for esthetic and functional definitive restorations and the long term stability of the neuromuscular system and the TMJ. In this case, 66 year-old female presented with generalized worn dentition. Based on assessment, pathologic destruction of teeth structure on entire dentition was caused by masticatory force and diet habit without loss of vertical dimension. Subsequently, 3 mm increase of vertical dimension that based on incisor for tooth restoration and esthetic improvement was determined. After 8 weeks stabilization period with temporary fixed prostheses, definitive prostheses were fabricated. After 6 months follow up period, satisfactory outcomes were attained both functional and esthetic aspects through this procedure.

  • PDF

The Effect of Human Appendage Muscle Strength on Increase in Vertical Dimension from Intercuspal Position of Mandible (교두감합위로부터 출발한 수직교합고경의 단계적 증가가 사지 근력에 미치는 영향에 관한 연구)

  • Hong, Dong-Hee;Lee, Sung-Bok;Choi, Dae-Kyun
    • Journal of Dental Rehabilitation and Applied Science
    • /
    • v.19 no.3
    • /
    • pp.169-183
    • /
    • 2003
  • According to our recent investigation that the increase in the occlusal vertical dimension made the appendage muscle strength got higher, the occlusal appliances were made by increasing the occlusal vertical dimension "from the centric relation" position of the mandible. In this experiment, the authors tried to study the change in the appendage muscle strength due to increase in occlusal vertical dimension from intercuspal position(ICP) of mandible with the same subjects and manner as the former experiment. For this study, ten male athletes in a mean age of 23 year who were joined the former study were selected. All the subjects had a complete or almost complete set of natural teeth and reported no subjective symptoms of temporomandibular disorders. Upper and lower casts were mounted on the semi-adjustable articulator at the intercuspal position and a point was marked on the attached gingival area between the right canine and the right 1st. premolar in each upper and lower cast. From the points, the occlusal vertical dimension was increased by 2mm, 3.5mm and 5mm, and then each 10 maxillary type occlusal splint at each 3-increased position were fabricated with heat curing clear acrylic resin. Including the intercuspal position, the 3 kinds of occlusal splints were placed on the subjects individually, and then isokinetic muscle strength on 7 parts of the human appendage which are shoulder, knee, ankle, wrist, forearm, elbow and hip was measured with the CYBEX 6000 SYSTEM (Lumex, NewYork, USA). The results were as follows: The highest mean value in muscular strength was shown at the position of 2mm-increased vertical dimension. The muscle strength during internal/external rotation of shoulder and knee, plantarflexion of ankle, flexion of elbow, and flexion and extension of hip at the increased occlusal vertical dimension position were significantly higher than them at the intercuspal position (p<0.05). Only in view of the increase in the appendage muscle strength, regardless of the way of making the occlusal splints by elevating the occlusal vertical dimension from the centric relation position or intercuspal position, the occlusal splints had an effect on the increase of isokinetic muscle strength at the occlusal vertical dimension which increased within the proper range on the habitual arc of closure.

The Effect on Appendage muscle strength due to Increase in Occlusal Vertical Dimension (수직적 교합고경의 증가가 사지 근력에 미치는 영향에 관한 연구)

  • An, Su-Jin;Lee, Sung-Bok
    • Journal of Dental Rehabilitation and Applied Science
    • /
    • v.17 no.4
    • /
    • pp.231-244
    • /
    • 2001
  • This study was conducted to observe the effect on appendage muscle strength according to increase in occlusal vertical dimension. For this study, ten males with a mean age of 21 were selected. The subjects had a complete or almost complete set of natural teeth and reported no subjected symptoms of pain or dysfunction in the masticatory system. The tested occlusal splints were made at the position of increased occlusal vertical dimension of 2mm, 3.5mm, and 5mm from the ICP. Before and after wearing occlusal splints, the appendage muscle strength were tested by CybexII Dynamometer in each subject. The results were as follows : 1. When occlusal vertical dimension was increased, most of mean muscular strength values were increased except for those of supination and pronation of forearm at the position of 5mm increased occlusal vertical dimension. 2. The statistical analyses demonstrated that the increased occlusal vertical dimension position to be significantly stronger than intercuspal position for the muscle strength of the flexion and extension of hip, supination of forearm, external and internal rotation of knee, dorsiflexion and plantarflexion of ankle (p<0.05). 3. At the position of 3.5mm increased vertical dimension displayed the highest mean muscluar strength value than other positions. 4. Statistically demonstrated values, except for supination of forearm, internal rotation of shoulder, were related to lower appendage. Therefore splint was more effective on lower appendage than upper appendage to make muscle strength increased. 5. The mean increased rate of muscular strength tested on knee(57%), ankle(42%), and wrist(20%) were higher than hip(31%), elbow(14%), and shoulder(17%).

  • PDF

Treatment of Severely Worn Dentition: A Clinical Report (심하게 마모된 치열의 보철수복)

  • Choi, Mee-ra
    • Journal of Dental Rehabilitation and Applied Science
    • /
    • v.25 no.4
    • /
    • pp.337-347
    • /
    • 2009
  • The treatment of a patient with severely worn dentition is often challenging due to loss of vertical dimension and an uneven occlusal plane. To establish a correct occlusal plane and space for prostheses, it is necessary to increase vertical dimension. Occlusal vertical dimension is the vertical position of mandible to maxilla in centric occlusion. McAndrew reported that in spite of the change of the vertical dimension, the altered occlusion would be maintained if the equal occlusal contacts were established in centric relation. Centric relation is defined as an anatomically and physiologically stable, repeatable posture of the mandible and can be considered a most acceptable treatment and reference position. In this case we tried to treat patients with severely worn dentition by the use of centric relation and increased vertical dimension for the space of prostheses.

Mouth rehabilitation of a patient with severely worn dentition with vertical dimension increase (심한 마모를 가진 환자에서 수직 고경 증가를 동반한 구강회복 증례)

  • Lee, Ki-Young;Kim, Chi-Yoon;Jung, Ji-Hye;Kim, Yu-Lee
    • The Journal of Korean Academy of Prosthodontics
    • /
    • v.53 no.3
    • /
    • pp.215-221
    • /
    • 2015
  • Treating patients with severely worn dentition often requires comprehensive prosthetic treatments. Oral rehabilitation and long-term stability could be achieved by analyzing the cause of the wear and changing vertical dimension. The temporary restoration procedure is executed and patient's adaptation is evaluated by long-term observation when treatment is accompanied with increasing vertical dimension. In this case, 54 year-old male presented with worn dentition and esthetic dissatisfaction. In oral manifestations, severely worn dentition with attrition and erosion is diagnosed. To evaluate change of vertical dimension, interocclusal rest space, facial appearance, pronunciation, clinical crown length, distance from incisor edge to labial vestibule are evaluated. Consequently, 2.5 mm increase of vertical dimension that based on articulator incisal pin is determined. After 8 weeks stabilization period with temporary prostheses, definitive prostheses are fabricated. After 6 months follow up period, satisfactory outcomes were achieved both in functional and esthetic aspects through this procedure.

Full-mouth rehabilitation without changing the vertical dimension in patient with worn dentition (마모된 치열을 가진 환자에서 수직교합고경 변화 없이 수복한 증례)

  • Kim, Minuk;Kim, Nahong;Jang, Hee-Won;Lee, Yong-Sang
    • The Journal of Korean Academy of Prosthodontics
    • /
    • v.54 no.2
    • /
    • pp.160-166
    • /
    • 2016
  • Although physiologic abrasion in normal range need not to be corrected, when hard tissue of teeth are worn abnormally fast, it can cause severe damage and destroy esthetics and, functional structure of occlusion consequently. To establish a correct occlusal plane and space for the patient with worn dentition, it is necessary to increase vertical dimension. However, actual occlusal vertical dimension remains unhanged with compensation for the increase of alveolar bone height equivalent to the decrease of teeth length. A 74-year-old male presented with worn dentition and fractured tooth. Based on the assessment of OVD including clinical findings, full-mouth rehabilitation without increase of OVD was planned. This case presents that a satisfactory clinical result was achieved by restoring the worn dentition without changing occlusal vertical dimension.

Full mouth rehabilitation with extremely worn dentition (심한 치아 마모 환자의 전악보철 수복 증례)

  • Cha, Hwa-Ryun;Yeom, Kyeong-Yeon;Lee, Yong-Sang;Kim, Na-Hong
    • Journal of Dental Rehabilitation and Applied Science
    • /
    • v.33 no.3
    • /
    • pp.238-244
    • /
    • 2017
  • Pathologic attrition leads to pathologic damage on occlusal plane, functional disorders, occlusal disharmony, esthetic problems, pulpal lesion, temporomandibular joint (TMJ) disorder. In this case, treatment plan should be considered for possibility of vertical dimension loss, occlusal pattern, esthetics, phonetics, amount of vertical dimension increase. This case report was a 71-year-old man who had severely worn dentition. Full mouth rehabilitation was carried out with vertical dimension increase due to limited space for prosthesis. After evaluation of provisional restorations for patient's compliance, final restorations were fabricated and routine clinical assessments were made. This case presents that a satisfactory clinical result was achieved by restoring the worn dentition.

Rehabilitation of the Worn Dentition (심하게 마모된 치열의 전악 수복에 대한 임상적 고찰)

  • Kim, Yu-Lee
    • Journal of Dental Rehabilitation and Applied Science
    • /
    • v.26 no.4
    • /
    • pp.455-462
    • /
    • 2010
  • Patients often seek rehabilitative treatment for severely worn dentition. The etiology of noncarious tooth wear due to attrition, abrasion, and erosion is multifactorial. To treat the worn dentition, it is important to identify and eliminate and/or control the factors that contribute to excessive wear. Many situations requiring complete mouth rehabilitation present with the challenge of a lack of restorative space. To establish a correct occlusal plane and space for prostheses, it is necessary to increase vertical dimension. This may require an increase in occlusal vertical dimension. Also clinicians should be able to choose the appropriate restorative materials to achieve excellence in natural esthetics as well as proper biomechanics and durability. This article presents a method for altering occlusal vertical dimension to restore dentitions with limited restorative space due to loss of tooth structure.

Full mouth rehabilitation of the patient with worn dentition using full-contour monolithic zirconia prostheses at an increased vertical dimension of occlusion: a case report (치아 마모 환자에서 수직고경 증가를 동반하여 단일구조 지르코니아 보철물로 완전구강회복을 시행한 증례)

  • Oh, Kyung-Chul;Chung, Moon-Kyu;Kim, Jee-Hwan;Shim, June-Sung
    • The Journal of Korean Academy of Prosthodontics
    • /
    • v.50 no.3
    • /
    • pp.198-203
    • /
    • 2012
  • Excessive occlusal wear results in unacceptable damage to the occluding surfaces, and can cause pulpal injury, occlusal disharmony, impaired function, and aesthetic deformity. Patients with severely worn dentition need to be classified as several categories relative to the vertical dimension of occlusion (VDO) and the interocclusal distance for the prosthetic space. When treating patients classified as those who have excessive wear without loss of occlusal vertical dimension but with limited space, we could consider treating them at an increased vertical dimension of occlusion. Treatments at an increased vertical dimension of occlusion may provide stability, given that the amount of its increase was minimal, and a perfected occlusion was achieved after enough stabilization period. A 50-year-old male visited the department of Prosthodontics in Yonsei University Dental Hospital with the chief complaint of worn teeth on lower anterior area. Reconstruction at an increased vertical dimension of occlusion was planned. After the compatibility of the new vertical dimension of occlusion had been confirmed under interim fixed restorations, definitive fixed restorations composed of full-contour monolithic zirconia prostheses were placed. This case presents that a satisfactory clinical result was achieved by restoring the worn dentition at an increased vertical dimension of occlusion with an improvement in esthetics and function.

Full mouth rehabilitation on the patient with class II jaw relation and posterior bite collapse using reestablishment of occlusal vertical dimension: a case report (구치부 교합지지가 상실된 II급 악간관계 환자의 교합 재설정을 통한 완전 구강회복 증례)

  • Kim, Jae-Hyun;Cho, Hye-Won;Jung, Ji-Hye
    • Journal of Dental Rehabilitation and Applied Science
    • /
    • v.31 no.3
    • /
    • pp.262-272
    • /
    • 2015
  • Loss of molar support and abnormal jaw relationship lead to occlusal disharmony and cause pathologic signs. Full mouth rehabilitations with reestablishment of occlusal schemes are needed. In this case, the 75 year-old female patient showed posterior bite collapse, irregular occlusal plane and Class II jaw relationship. By observing her profile and interocclusal distance, she was diagnosed as loss of occlusal vertical dimension. Treatment plan is to restore maxillay class I removable partial denture and mandibular fixed prosthesis and to establish vertical dimension and harmonious occlusal plane. Occlusal vertical dimension of 19 mm, which is obtained by 7.5 mm increase between maxillary right lateral incisor and mandibular canine, was established using temporary prosthesis via diagnostic wax-up. Patient adaptation with newly formed vertical dimension was verified during 8 week follow-up period. Within the information of interim prostheses, final restoration was constructed and delivered. The patient showed sound occlusal scheme and esthetic profile.