• Ocean and Polar Research
• /
• v.26 no.2
• /
• pp.273-286
• /
• 2004

The effects of environmental forcing on autotrophic picoplankton distributional patterns were investigated for convergence ($5^{\circ}N$), divergence ($9^{\circ}N-10^{\circ}30'N$) and oligotrophic ($17^{\circ}N$) sites in the tropical eastern Pacific during 2001 and 2003 KODOS (Korea Deep Ocean Study) cruises. The distributions of picoplankton populations - Prochlorococcus, Synechococcus and picoeukaryotes algae - were determined by flow cytometric analyses. Latitudinal variations in abundance maxima, vertical profiles, integrated abundance (0-150 m), and estimated carbon biomass were contrasted for each site according to three hydrological conditions. Prochlorococcus showed consistently high abundance in the surface mixed layers of all sites at $1\;{\times}\;10^5{\sim}3\;{\times}\;10^5\;cells\;ml^{-1}$ and showed declining abundance below these layers. However, these decreasing rates were not particularly sharp showing considerably high abundance at $1\;{\times}\;10^4\;cells\;ml^{-1}$ or higher even at 100 m depth. Vertical profiles of Synechococcus and picoeukaryotes were generally parallel to each other in all sites. A clear abundance maximum was observed at divergence site at or slightly above the pycnocline depth. Higher abundance was observed at the surface mixed layer for convergence site but a sharp decrease was observed below the pycnocline. However, there was no significant abundance fluctuation with depth at more oligotrophic site ($17^{\circ}N$). Integrated cell abundance of Prochlorococcus was high in the oligotrophic site at $2.17\;{\times}\;10^{13}\;m^{-2}$, and low in the convergence site at $0.88\;{\times}\;10^{13}\;m^{-2}$. However, opposite pattern was observed for Synechococcus and picoeukaryotes where relatively high integrated cell abundance was shown in the convergence site. Estimated carbon biomass of Prochlorococcus contributed 30.4-80.3% of total autotrophic picoplankton carbon showing the highest contribution in the oligotrophic site and the lowest contribution in the convergence site. Synechococcus contribution of total autotrophic picoplantkon carbon biomass was lower than 5.8% for most of sites except the convergence site where Synechococcus contributed 23.2% of picoplankton carbon biomass. Carbon biomass of picoeukaryotes was 18.8-46.4% showing the highest carbon biomass at the convergence site. Overall, Prochlorococcus showed higher cell abundance and carbon biomass and exhibited different reaction to hydrological conditions when compare with the other two major autotrophic picoplankton groups.

• Journal of Environmental Impact Assessment
• /
• v.23 no.2
• /
• pp.119-136
• /
• 2014

This work aims to select the potentially vulnerable plant species against climate change at alpine and subalpine belts of Mts. Sorak, Jiri, and Halla, from central, southern, southern insular high mountains of the Korean Peninsula, respectively. The selection of global warming related vulnerable plants were performed by adapting various criteria, such as flora, endemicity, rarity, floristically specific and valuable species, species composition at mountain summits, horizontal and vertical ranges of individual species, and their distributional pattern in the Korean Peninsula. Line and quadrat field surveys along the major trails from all directions at height above 1,500 meters above sea level of Mts, Sorak, Jiri and Halla were conducted each year during spring, summer, and autumn from 2010 to 2011. Based upon above mentioned eight criteria, high level of climate change related potentially vulnerable arboral plants, such as Rhododendron aureum, Taxus caespitosa, Pinus pumila, Oplopanax elatus, Vaccinium uliginosum, and Thuja koraiensis are noticed from at subalpine belt of Mt. Sorak. Species of Abies koreana, Rhododendron tschonoskii, Oplopanax elatus, Taxus cuspidata, Picea jezoensis, and Juniperus chinensis var. sargentii belong to climate change concerned vulnerable species at subalpine belt of Mt. Jiri. High level of climate change related species vulnerability is found at alpine and subalpine belts of Mt. Halla from Diapensia lapponica var. obovata, Salix blinii, Empetrum nigrum var. japonicum, Vaccinium uliginosum, Juniperus chinensis var. sargentii, Taxus cuspidata, Rhamnus taquetii, Abies koreana, Hugeria japonica, Prunus buergeriana, and Berberis amurensis var. quelpartensis. Countermeasures to save the global warming vulnerable plants in situ are required.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.21 no.2
• /
• pp.286-291
• /
• 1997

The purpose of this study is to examine the effect of clothing habits wearing cool or warm in daily life on motor ability. A group of ten healthy young females were divided into a cold (C) group and a warm (W) group. From autumn to winter, C group was advised to wear cool clothing, and W group, warm Clothing. The subject's physical fitness were tested in October, initial stage of the clothing training and March of the following year, final stage of the training. The measurements were taken after the subjects rested in a thermoneutral room conditioned at 23$\pm$2$^{\circ}C$ over 1 hour. The test items were weight, skinfold thickness, grip strength (right, left), back-lift strength, vertical jump, sit-ups, Irosmax, side step test, single-foot standing test with eyes closed, and standing trunk flexion. Changes in motor ability of each group between initial stage and final stage of the training were compared. 1. Muscle strength, part of the motor revelation capacity, showed no significant change in the both ,Troops. On the other hand, strength and power showed a decrease in the both groups and C group showed a sharp decrease. 2. Muscular endurance and cardio-pulmonary fitness, part of the motor continuation capacity, were increased after the training and the degree of increase was great in C group. 3. C group showed significant increase in motor coordination capacity including agility, balance, and flexibility after the training, while Wgroup showed significant increases only in balance. 4. Weight and skinfold thickness as a part of the physique showed no significant change.

• Journal of Advanced Navigation Technology
• /
• v.6 no.1
• /
• pp.10-16
• /
• 2002

High altitude platform station(HAPS) is being developed actively in some countries as well as Korea. At the same time Resolution 734 was adopted in WRC-2000 to study the sharing of HAPS into the existing fixed services in the bands above 3GHz. As one of the sharing studies, interferences between HAPS and radio-relay stations should be analyzed by dividing into two cases, the one is the interference effects of HAPS system into radio-relay stations and on the contrary, the other that of radio-relay stations into HAPS system. Since the former case had been already studied, only the latter case will be focused on this paper. Analysis result shows that the coordination distance must be needed above 100 km when the trendline of radio-relay is located vertical to HAPS service area and the transmitting power is -50 dBW/MHz.

• The korean journal of orthodontics
• /
• v.42 no.2
• /
• pp.56-63
• /
• 2012

Objective: To identify the right and left difference of the facial soft tissue landmarks three-dimensionally from the subjects of normal occlusion individuals. Materials and Methods: Cone-beam computed tomography (CT) scans were obtained in 48 normal occlusion adults (24 men, 24 women), and reconstructed into 3-dimensional (3D) models by using a 3D image soft ware. 3D position of 27 soft tissue landmarks, 9 midline and 9 pairs of bilateral landmarks, were identified in 3D coordination system, and their right and left differences were calculated and analyzed. Results: The right and left difference values derived from the study ranged from 0.6 to 4.6 mm indicating a high variability according to the landmarks. In general, the values showed a tendency to increase according to the lower and lateral positioning of the landmarks in the face. Overall differences were determined not only by transverse differences but also by sagittal and vertical differences, indicating that 3D evaluation would be essential in the facial soft tissue analysis. Conclusions: Means and standard deviations of the right and left difference of facial soft tissue landmarks derived from this study can be used as the diagnostic standard values for the evaluation of facial asymmetry.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.9 no.1
• /
• pp.115-125
• /
• 1998

This paper examined the feasibility of adding a new NGSO/MSS(Non-Geostationary orbit/Mobile satellite service) service link to a frequency band which is already allocated to fixed-service microwave(M/W) system. To achieve this goal, the NGSO/MSS handset performance under the influence of the M/W multiple stations and the influence of handsets on the M/W station were both analyzed. Sharing criterions were also obtained by means of coordination contour in the former case, and handset capacity in the latter case. As the results, it was proven that sharing was feasible only when the vertical distance between handset and trendline was above 4 km except front and back points of M/W antenna bore sight under influence of 9 hops(the distance between hops = 50 km) M/W system on the NGSO/MSS handset, and only when the capacity of handset was below $7.0\times10^{-14}$ handsets/ $m^{2}$ under influence of handsets on the M/W station.

• Advances in Computational Design
• /
• v.4 no.2
• /
• pp.119-139
• /
• 2019

Planning and management building projects should tackle the coordination of works and the management of limited spaces, traffic and supplies. Activities cannot be performed without the resources available and resources cannot be used beyond the capacity of workplaces. Otherwise, workspace congestion will negatively affect the flow of works. Better on-site management allows for substantial productivity improvements and cost savings. The procurement system should be able to manage a wider variety of materials and products of the required quality in order to have less stock, in less time, using less space, with less investment and avoiding multiple storage stations. The objective of this paper is to demonstrate the advantages of using the Chronographic modeling, by combining spatiotemporal technical scheduling with the 4D simulations, the Last Planner System and the Takt-time when modeling the construction of building projects. This paper work toward the aforementioned goal by examining the impact that material flow has on site occupancy. The proposed spatiotemporal model promotes efficient site use, defines optimal site-occupancy and workforce-rotation rates, minimizes intermediate stocks, and ensures a suitable procurement process. This paper study the material flow on the site and consider horizontal and vertical paths, traffic flows and appropriate means of transportation to ensure fluidity and safety. This paper contributes to the existing body of knowledge by linking execution and supply to the spatial and temporal aspects. The methodology compare the performance and procurement processes for the proposed Chronographic model with the Gantt-Precedence diagram. Two examples are presented to demonstrate the benefits of the proposed model and to validate the related concepts. This validation is designed to test the model's graphical ability to simulate construction and procurement.

• Journal of Korea Trade
• /
• v.24 no.6
• /
• pp.115-134
• /
• 2020

Purpose - International trade leads to the international division of labor, improving the efficiency of the global economic system. Transport costs are a more serious barrier to international trade than customs tariffs. An increase in competition in the transport sector may thus lead to a reduction in transport costs. However, if a carrier's nationality significantly influences transport costs, simply adding more competing carriers of different nationalities would be ineffective. Therefore, it is necessary to establish national or regional carriers to influence competition and reduce transport costs. This study investigates this "nationality effect" by treating Hanjin Shipping's collapse as a natural experiment. Design/methodology - The theoretical basis of this study is the 3rd-degree price discrimination in container shipping market. By using the monthly data of container freight rates of Korea, China and Japan, this study shows the so-called Korea Premiums, which are the empirical counterparts of nationality effect in Korea container shipping market. For this empirical investigation, the structural model with state-space form is used and the dummy models are also estimated. In addition, because China has been also affected by the Hanjin's collapse, the China premiums are considered too. Findings - Compared with Japan's case, it is shown that there had been the so-called Korea premiums since the collapse of Hanjin Shipping. These results are robust from both the state-space model and dummy models. The time pattern of Korea premiums was consistent with the market evolution, especially the pattern of substitutability in container shipping markets. In addition, this paper shows the magnitude of Korea premiums. Originality/value - The argument of this study that the nationality effect can be interpreted as an extended concept of the home market effect is original, which is expected to evoke future research efforts. Further, the discussion on the shipping industrial policy from both horizontal and vertical aspects will provide the relevant policy makers with solid information, especially for the policy coordination in a global scale.

• International conference on construction engineering and project management
• /
• 2013.01a
• /
• pp.252-259
• /
• 2013

Building Information Modeling (BIM) is utilizing CAD technology in a way that ultimately ties all the components of a building together as objects imbedded with information, and has been changing the way we design and build over the last 20-30 years. In Polytechnic Institute of NYU, there are four BIM courses offered which provide students with different levels of knowledge regarding BIM Technique, BIM Standards, BIM Guideline and Roadmap for Private and Public Implementation, BIM Application in Real Projects, the Cooperation of BIM and IPD for Public Works in New York City. With advanced BIM technology, BIM's integration into the construction process and its incorporation into project delivery systems, especially Integrated Project Delivery (IPD) are the bridges between technology, industry and research. This paper presents an integrated BIM curriculum with three modules: 1) BIM functions and Bid Preparation; 2) Time-Cost Trade-off Analysis; and 3) Problems Solving in BIM/IPD Environment. In this project-based curriculum developed by the common efforts of academia, public agency and industry, the objectives are: (1) to provide the information and skills needed to successfully implement BIM into the construction phase; (2) to identify BIM's role in construction and the project delivery system; (3) to develop a module in conjunction with leading BIM into project delivery system, particularly coordination between BIM and IPD; (4) to connect technology and research into industry. The course assessment was conducted and the results indicate that it is a successful reform in construction management education.

• Korean Journal of Poultry Science
• /
• v.6 no.2
• /
• pp.91-102
• /
• 1979

The basic problem of the broiler industry is that of fluctuating prices, mainly thanks to unstable supply of and inelastic demand for products as usually indicated as a peculiarity of agricultural commodities. This particularly brings the producer to a great economic risk, because he has to sell products under the condition of pure competition, whereas others from whom he has to buy deal under the condition of oligopoly or even monopoly. Therefore, producers economic position is generally placed in the worst comparing others dealing with, which results in unbalanced economic status of elements involved in broiler operation and further obstruction of industry development as a whole. A certain type of business coordination to overcome such a problem should be measured in order to improve the efficiency of entire operation and thus assure the balanced industry development. The concept of the economic integration developed in modern business system had been adapted to U.S. poultry industry which became common later around the world as a means of stabilizing producers price and whole industry as well. There are two main typos of integration; horizontal and vertical The former refers to the general grouping of similar business units, eg. a hatchery tying with other hatchery, while the latter refers to the knitting together of two or more stages of economic activities, eg. tying together among units of hatching, fled milling, production, processing and marketing. By having the industry integrated, risk and uncertainty involved in various stages of operation could be diversified. The typo of integrating contract between producers and integrators include the share of profits, flat fee payment, feed conversion payment and salary basis. In the U.S., extensive changes in production, processing, and marketing during the last few decades have changed the thicken broiler industry from one of small, widely scattered farms to one that is largo, concentrated and efficient. More than 99 percent of all broilers produced are grown under contract and by integrated firms which vary in size of operation and complexity. About 84 percent of all production is concentrated in 10 States. Some of the other factors ;hat contributed to these choses arc costs, energy use, prices, processing, marketing and demand. No integrated broiler production system has yet been applied in Korea's poultry industry, thus all stages all broiler operation run independently seeking for its own profit. Consequently, producers price fluctuate very widely around the year even more than 50 percent in a few months. This also leads to disadvantages of material supplies, processors and distributors and enforce the industry unstable. The current economic environment in Korea seems that the time for broiler integration comes and as an ideal integrator, feed millers, food processors and producers group may be considered.