• 한국정밀공학회지
• /
• 제21권9호
• /
• pp.77-84
• /
• 2004

The attachment of mobile vehicle is necessary for the automated operation on the inclined or vertical walls of steel structures. Since the vehicle requires attaching devices additionally, its overall efficiency can be reduced by the devices. Therefore, external shapes of mobile vehicles have to be researched to give the effective movement on the vertical face. For the design of mobile vehicle, the guideline has been derived from the modeling of wall-climbing, so that the vehicle should have a specific external shape for vertical movement due to the gravitational force. Hence, some adequate arrangement of attaching device to the mobile vehicle has been presented for the effective movement. In the experiments with four permanent magnetic wheels, a plausible result was achieved as a vertical attaching force of 185.2(N), a friction force of 153.8(N) and a curvature radius of 1.4m. The mobile vehicle should be modified according to the proposed design guideline, and then it could be applied to a specific operation as an appropriate external shape. Also, Further research is recommended on an optimal posture and a moving method in a specific application, as the attaching force of the vehicle can be affected by its posture.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 봄 학술논문 발표대회
• /
• pp.393-394
• /
• 2023

This paper provides an overview of seismic design considerations for vertical construction joints of a slurry walls used as a permanent basement walls.

• 한국자동차공학회논문집
• /
• 제24권5호
• /
• pp.512-519
• /
• 2016

In this study, the tire road friction estimation(TRFE) algorithm for controlling the rear wheel driving force of a 4WD vehicle during acceleration is developed using a standard sensor in an ordinary 4WD passenger car and a speed sensor. The algorithm is constructed for the wheel shaft torque, longitudinal tire force, vertical tire force and maximum tire road friction estimation. The estimation results of shaft torque and tire force were validated using a torque sensor and wheel force transducer. In the algorithm, the current road friction is defined as the proportion calculated between longitudinal and vertical tire force. Slip slop methods using current road friction and slip ratio are applied to estimate the road friction coefficient. Based on this study's results, the traction performance, fuel consumption and drive shaft strength performance of a 4WD vehicle are improved by applying the tire road friction estimation algorithm.

• 대한치과보철학회지
• /
• 제31권4호
• /
• pp.643-659
• /
• 1993

This study was performed for the purpose of evaluating the stress distributions around five different types of implants according to their structures. The stress distribution around the surrounding bone was analysed by two-dimensional photoelastic method. Five epoxy resin models were made, and vertical and lateral forces were applied to the models. A circular polariscope was used to record the isochromatic fringes. The results of this study were summerized as follows : 1. Threaded type implants showed more even stress distribution patterns than cylinderical type implants when vertical and lateral forces were applied. 2. The stress concentrated patterns were observed at the neck portion and middle portion of the cylindrical type implants comparing with threaded type implants when vertical force was applied. 3. Model 1 and model 4 which are tthreaded type implants showed similar stress distribution patterns at the middle and apical portions and more stress was concentrated at the neck porion of model 1 comparing with model 4 when vertical force was applied. The stresses around model 1 were more evenly distributed when lateral force was applied. 4. More stress was concentrated at the neck and middle portion of cylindrical type implants than threaded type implants when lateral force was applied. 5. Model 1 showed the most even stress distribution patterns when lateral force was applied and stress distribution did no occured at the apical portion of modedl 2 when lateral force was applied. 6. There were almost no differences in stress concentrated patterns with or without having hollow design. And the stress concentrated patterns were observed at the corner of apex in model 5 which has hollow design when vertical force was applied.

• 문화기술의 융합
• /
• 제8권5호
• /
• pp.547-552
• /
• 2022

본 연구에서는 궤도틀림이 차륜-레일 상호작용력에 미치는 영향을 분석하고 이를 바탕으로 궤도틀림을 관리할 수 있는 하중기반의 궤도틀림 분석기법을 제안하였다. 도시철도 침목플로팅궤도와 직결도상 접속구간에서 발생된 고저틀림 측정결과를 이용하여 고저틀림이 차륜-레일 상호작용력(동적윤중)과 레일의 진동가속도에 미치는 영향을 해석적으로 분석하였다. 직결궤도 총 4개소를 대상으로 부분적으로 직결궤도를 포함한 침목플로팅궤도 구간과 전, 후 인접 침목플로팅궤도 구간으로 구분하여 고저틀림을 비교, 분석하였다. 분석결과, 직결궤도를 포함한 구간이 침목플로팅궤도 보다 궤도틀림이 크게 나타났다. 고저틀림 데이터를 적용한 차륜-레일 상호작용력 분석결과, 거리에 비해 상대 변위차가 큰 구간에서 차륜-레일 상호작용력과 레일가속도가 증가하는 것으로 분석되었다. 반면 고저틀림 데이터의주기와 틀림량(변위)이 일정한 구간의 경우 차륜-레일 상호작용력과 레일가속도가 상대적으로 작게 나타났다. 따라서고저틀림의 주기가 짧고 상대변위차가 클수록 차륜-레일 상호작용력 측면에서 불리한 것으로 분석되었다. 본 연구에서는 궤도틀림 측정데이터를 이용한 차륜-레일 상호작용 해석을 통해 차륜-레일의 상호작용력을 바탕으로한 하중기반의 궤도틀림 분석기법 적용방안을 제시하였다.

• 한국기계가공학회지
• /
• 제19권11호
• /
• pp.70-77
• /
• 2020

Vibratory bowl feeders are widely utilized to align and feed the parts stacked inside the bowl of a feeder. The electro-magnetic force of the electromagnet in a bowl feeder generates the excitation force for the bowl to vibrate in both the horizontal and vertical directions to continuously feed the parts on the track. The feed rate of the part depends on the associated displacement in each direction during the vibration. Therefore, the excitation force induced by the electromagnet should be estimated in advance to ensure the suitable design of the bowl feeder. In this study, a theoretical solution was developed to calculate the electro-magnetic force of the electromagnet for a bowl feeder. Using the proposed solution, the electro-magnetic forces corresponding to a variation in the input parameters of the electromagnet, such as the voltage, frequency, and air gap, could be obtained. The force values obtained using the theoretical solution exhibited a satisfactory agreement with the results obtained using the finite element method, thereby demonstrating the validity of the approach. Subsequently, the bowl displacements were analyzed using the motion equation for the bowl feeder when the theoretically obtained excitation force were applied to vibrate the feeder. The correlation between the vertical displacements of the bowl and input parameters of the electromagnet could be obtained.

• 한국철도학회논문집
• /
• 제6권4호
• /
• pp.215-220
• /
• 2003

In this paper the dynamic characteristics of a Swing Motion Bogie, such as a critical speed and a carbody vibration, are investigated in reply to the request of the Meridian Rail Corporation in the United States. Also described are experimental results of the maximum speed, the derailment coefficient, the lateral force, the vertical force, the vibration acceleration and steady state lateral acceleration measured from main line tests.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2002년도 추계학술대회 논문집(II)
• /
• pp.892-897
• /
• 2002

The research was requested by Meridian Rail Corporation in United States. The Swing Motion Bogie can application by Korea style if synthesize study result of bogie strength evaluation, bogie dynamic characteristics analysis, actual test(maximum speed, derailment coefficient, lateral force, vertical force, vibration acceleration, steady state lateral acceleration) etc..

• 대한기계학회논문집B
• /
• 제41권4호
• /
• pp.277-283
• /
• 2017

본 연구에서는 높이에 따른 점프 전략 변화를 이해하기 위해 반동을 이용한 수직 점프 시 상변화 시점에서의 지면반력 벡터가 높이에 따라 어떻게 변하는지 분석하였다; 반동과 추진 구간에서 유사한 힘 작용선을 갖는 수직 점프의 경우, 상변화 시점에서 반동의 이득을 나타내는 합력 벡터의 크기와 방향이 일정한 경향성을 가지고 높이에 따라 변화할 것이라 가정하였다. 9명의 청년군 모두는 정해진 5 종류의 높이를 총 5세트에 걸쳐 랜덤 방식으로 점프하였으며, 해당 높이를 유도하기 위해 지면으로부터 191 cm에서 221 cm 사이에 일정한 간격을 두고 마커를 배치하였다. 점프 높이가 증가함에 따라 반동 시 무게중심을 낮추고, 수평, 수직 방향의 힘을 증가시키는 것이 관찰되었는데, 이는 추진일을 증가시키기 위해 관절의 가용범위를 넓히고 초기 힘(또는 가속도) 이득을 늘리기 때문으로 생각된다.

• 한국공간구조학회논문집
• /
• 제9권1호
• /
• pp.69-78
• /
• 2009

최근의 근단층지반운동인 Northridge 지진(1994, 미국), Kobe 지진(1995, 일본), Izmit 지진(1990, 터키)은 큰 수직성분의 영향으로 건축물 및 교량에 심각한 손상을 주었다. 일반적인 건축구조물의 내진설계에서 지진하중의 수직성분을 고려하여 설계하는 경우는 드물다. 본 연구에서는 지진하중의 수직성분 영향의 고려 유무에 따른 예제구조물의 기둥부재의 축력의 변화와 부재 단부의 소성힌지회전각을 산정하여 시스템의 손상상태를 평가하여 보았다. 해석결과 축력의 증가는 기둥부재의 손상에 의한 전체 구조시스템의 story collapse mechanism의 가능성을 주게 되므로 근단층지반운동이 예상되는 부분에서는 지진하중의 수직성분에 대한 영향을 고려하여야할 것으로 판단된다.