• The Research Journal of the Costume Culture
• /
• v.5 no.2
• /
• pp.245-252
• /
• 1997

In this study, the comfortable as well as good-looking overall patterns were investigated. To measure the maximum vertical spaces caused by the body movements, basic foundation type of overall pattern was made. The vertical spaces, which were measured using the CRO-SS-CUT method. The Result was as followings : The Maximum vertical space was 19.7㎝. The Maximum vertical space was 4.2㎝. The vertical space increased as the leg-movement angle increased.

• Proceedings of the Korean Geotechical Society Conference
• /
• 1996.10a
• /
• pp.149-158
• /
• 1996

• Journal of Industrial Technology
• /
• v.36
• /
• pp.65-69
• /
• 2016

Deflection of the vertical is used in geodetic surveying associated with geoid network construction for geoid modeling and ellipsoid decision and obtained by gravity survey, astronomic survey etc. Technique of astronomic survey and gravity survey is very complex and requires a significant amount of time until gathering data. So this study is to determined a various method which evaluates deflection of the vertical and components about deflection of the vertical using GPS results and orthometric height value decided by leveling. Results of components about deflection of the vertical using GPS/leveling is that ${\xi}$ conponent is distributed $-2.11^{{\prime}{\prime}}{\pm}0.62$, ${\eta}$ component is distributed $1.75^{{\prime}{\prime}}{\pm}0.71$. Decision of component about deflection of the vertical using GPS is less complex than existing astronomic survey. Decision of component about deflection of vertical line using GPS is not complicated than astronomic surveying and can determine in a very short time. So it will be important means to determine the exact orthometric height, topographic study and diastrophism if can periodically calculate.

• Earthquakes and Structures
• /
• v.11 no.4
• /
• pp.609-627
• /
• 2016

Results of an experimental program are presented in this paper for the influence of vertical load on the in-plane behavior of masonry infilled steel frames. Five half-scaled single-story, single-bay steel frame specimens were tested under cyclic lateral loading. The specimens included four infilled frames and one bare frame. Two similar specimens as well as the bare frame had moment-resisting steel frames, while the remaining two specimens had pinned steel frames. For each frame type, one specimen was tested under simultaneous vertical and lateral loading, whereas the other was subjected only to lateral loading. The experimental results show that the vertical load changes the cracking patterns and failure modes of the infill panels. It improves dissipated hysteresis energy and equivalent viscous damping. Global responses of specimens, including stiffness and maximum strength, do no change by vertical loading considerably. Regarding the ductility, the presence of vertical load is ignorable in the specimen with moment-resisting frame. However, it increases the ductility of the infilled pinned frame specimen, leading to an enhancement in the m-factor by at least 2.5 times. In summary, it is concluded that the influence of the vertical load on the lateral response of infilled frames can be conservatively ignored.

• Journal of Korea Technology Innovation Society
• /
• v.14 no.4
• /
• pp.983-999
• /
• 2011

This research focused on the strategy consulting of the 'Vertical Farm' for the blue ocean of Gyeonggi agricultural industry. The study was performed based on both theoretical study and related qualitative study approaches. particularly, 'scenario planning' as a foresight method was used for the strategy formulation of the Vertical Farm. The major determinants for the success of the formation of the Vertical Farm can be summarized as follows; the enhancement of research capability and the Relational Capability of the research institutions. In terms of the needs of times, this study regarding the strategy for the formation of the Vertical Farm is anticipated to be a good reference for the R&D organizations and technology cluster participants in coming years.

• Structural Engineering and Mechanics
• /
• v.59 no.4
• /
• pp.653-669
• /
• 2016

Recent earthquakes worldwide show that a significant portion of the earthquake shaking happens in the vertical direction. This phenomenon has raised significant interests to consider the vertical ground motion during the seismic design and assessment of the structures. Strong vertical ground motions can alter the axial forces in the columns, which might affect the shear capacity of reinforced concrete (RC) members. This is particularly important for non-ductile RC frames, which are very vulnerable to earthquake-induced collapse. This paper presents the detailed nonlinear dynamic analysis to quantify the collapse risk of non-ductile RC frame structures with varying heights. An array of non-ductile RC frame architype buildings located in Los Angeles, California were designed according to the 1967 uniform building code. The seismic responses of the architype buildings subjected to concurrent horizontal and vertical ground motions were analyzed. A comprehensive array of ground motions was selected from the PEER NGA-WEST2 and Iran Strong Motions Network database. Detailed nonlinear dynamic analyses were performed to quantify the collapse fragility curves and collapse margin ratios (CMRs) of the architype buildings. The results show that the vertical ground motions have significant impact on both the local and global responses of non-ductile RC moment frames. Hence, it is crucial to include the combined vertical and horizontal shaking during the seismic design and assessment of non-ductile RC moment frames.

• 한국해양학회지
• /
• v.12 no.1
• /
• pp.7-12
• /
• 1977

Vertical mixing in the ocean affects the formation of water masses as well as the vertical distribution of nutrients and dissolved substances. this study is to investigate the effect of stability on the intensity of vertical transfer in the case of shallow and straitfied channel. It is found that the relation of the stability and vertical turbulent diffusion is given by K$\sub$z/ = -${\beta}$-(c+${\beta}$) / ${\alpha}$(E-1/${\alpha}$) where K$\sub$z/ and E denotes the vertical turbulent diffusion coefficient and stability, respectively. The empirical coefficients ${\alpha}$, ${\beta}$ and c depend on the magnitude of vertical components and stability, i.e., through thermocline intensity. The study indicates that the diffusivity of the surface mixed layer is (K$\sub$z/)=300∼1,200$\textrm{cm}^2$/sec, the thermocline layer is (K$\sub$z/)= 50∼200$\textrm{cm}^2$/sec and the cold layer is (K$\sub$z/)=200∼600$\textrm{cm}^2$/sec based on near- minimum least-squares error estimates from the regression analysis. An important result of our study comes out that the model is in accordance with the general trends of the effect of stability on the vertical turbulent diffusion coefficients in the case of shallow and strongly stratified channel.

• Journal of Korean Society of Transportation
• /
• v.25 no.2 s.95
• /
• pp.157-165
• /
• 2007

In this research, a vertical alignment analysis algorithm was developed. The developed algorithm used acquired data from a vehicle with multiple sensors such as a global positioning system (GPS) an inertial navigation system (INS), and a distance measuring unit (DMI) to collect information about vehicle position and altitude. The vertical alignment analysis algorithm includes the identification of vertical tangent sections, the beginning and ending points of vertical curves, and the calculation of length of vortical curves. Also, the algorithm can help build models for vertical tangent sections and vertical curve sections. In order to verify the algorithm, a field survey was conducted at an actual highway section and the result of the field survey was compared to a highway CAD drawing.

• The Journal of the Korean dental association
• /
• v.40 no.7 s.398
• /
• pp.542-547
• /
• 2002

This study was aimed to help diagnose the vertical root fractures in endodontically and in nonendodontically treated teeth. This was a study about mine teeth with a vertical root fractures. Four cases were nonendodontically treated teeth and five cases were endodontically treated teeth. A collection of information including past dental history, periodontal probing, and X-ray was gathered on each case. One of the endodontic cases had no periodontal pocket depth and was in acute pain. It was confusing to find whether causes were because of endodontic failure or vertical root fractures. Most of the vertical root fractures were found in patients aged between 50 and 60. Vertical root fractures were found in the molar and premolar of maxillary and mandibular teeth. The second molars repecially, which had C shaped roots had vertical root fractures with apical propagation type. The apical propagation type means that vertical root fracture initiates in root apex and propagate to coronal root. The teeth with vertical root fractures of the apical propagation type, which was in acute pain, were very difficult in differential diagnosis of periodontal lesion and endodontic failure. Therefore, the dental history was very important to make a differential diagnosis. Past pain history repeated uncomfortable symptoms in bite was a key of differential diagnosis.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.6 no.4
• /
• pp.947-964
• /
• 2014

Rubble mound breakwaters protect the coastal line against severe erosion caused by wave action. This study examined the performance of different sizes and properties (i.e. height of vertical wall and tetrapod size) of rubble mound breakwaters on reducing the overtopping discharge. The physical model used in this study was derived based on an actual rubble mound in Busan Yacht Harbor. This research attempts to fill the gap in practical knowledge on the combined effect of the armor roughness and vertical wall on wave overtopping in rubble mound breakwaters. The main governing parameters used in this study were the vertical wall height, variation of the tetrapod weights, initial water level elevation, and the volume of overtopping under constant wave properties. The experimental results showed that the roughness factor differed according to the tetrapod size. Furthermore, the overtopping discharge with no vertical wall was similar to that with relatively short vertical walls (${\gamma}_v=1$). Therefore, the experimental results highlight the importance of the height of the vertical wall in reducing overtopping discharge. Moreover, a large tetrapod size may allow coastal engineers to choose a shorter vertical wall to save cost, while obtaining better performance.