• Journal of the Korean Academy of Clinical Electrophysiology
• /
• v.10 no.1
• /
• pp.45-52
• /
• 2012

Purpose : This study is carried out to investigate the effect of asymmetric exercises on soccer players' vertebral abnormality and weight bearing. Methods : A total of 40 soccer players were divided into either a group of 20 players who use a unilateral foot or a group of 20 players who use both feet. 3-dimensional spine structure analyzer was used to analyze body inclination, pelvic inclination, pelvic torsion, turning of spinal segment, spinal curvature, thoracic kyphosis curvature, lumbar lordosis curvature, left/right weight distribution, and front/back weight distribution. Results : The result of the two groups showed that there were significant differences (p<0.05) for every item except turning of spinal segment and lumbar lordosis curvature. Conclusion : From this result, we can find that spinal and pelvic deformity and body weight are unilaterally supported for soccer players with asymmetric exercises.

• Journal of Korean Neurosurgical Society
• /
• v.37 no.2
• /
• pp.116-123
• /
• 2005

Objective: Percutaneous kyphoplasty using a balloon-catheter is an widely accepted method which achieves the restoration of vertebral height and the correction of kyphotic deformity with little complication in osteoporotic vertebral compression fractures. The authors assess the results of 59 patients who underwent kyphoplasty, and analyze the factors that could affect the prognosis. Methods: From December 2001 to May 2003, fifty-nine patients underwent kyphoplasty. The patients included 49 women and 10 men aged 52-85 years. Average t-score on bone marrow density was -3.58. About 7cc of polymethylmethacrylate(PMMA) was injected into the fractured vertebral body using $Kyphon^{(R)}$ under local anesthesia. The vertical height of all fractured vertebrae was measured both before and after surgery. Outcome data were obtained by comparing pre- and post-operative VAS score and by assessing postoperative satisfaction, drug dependency and activity. Various clinical factors were analyzed to assess the relationship with the outcome. Results: The VAS score improved significantly, and the mean percentage of restored vertebral height was 53%. The mean improvement in kyphosis was $3.6^{\circ}$. Eighty-nine percent of the patients gained excellent or good results. Any of the clinical factors including the interval between fracture and operation, the degree of height loss, the degree of the vertebral height restoration or the correction rate of kyphosis did not affect the clinical results. Conclusion: Kyphoplasty is associated with a statistically significant improvement in pain and function with little complication. The clinical results are not affected by any clinical parameters. Further follow-up study is needed to determine whether the restoration affects the long-term clinical results.

• Asian Spine Journal
• /
• v.12 no.6
• /
• pp.1053-1059
• /
• 2018

Study Design: Retrospective review. Purpose: To detect the effect of cannulated (poly-axial head) and solid (mono-axial head) screws on the local kyphotic angle, vertebral body height, and superior and inferior angles between the screw and the rod in the surgical management of thoracolumbar fractures. Overview of Literature: Biomechanics studies showed that the ultimate load, yield strength, and cycles to failure were significantly lower with cannulated (poly-axial head) pedicle comparing to solid core (mono-axial head). Methods: The medical charts of patients with thoracolumbar fractures who underwent pedicle screw fixation with cannulated or solid pedicle screws were retrospectively reviewed; the subjects were followed up from January 2011 to December 2015. Results: Total 178 patients (average age, $36.1{\pm}12.4years$; men, 142 [84.3%]; women, 28 [15.7%]) with thoracolumbar fractures who underwent surgery and were followed up at Hamad Medical Corporation were classified, based on the screw type as those with cannulated screws and those with solid screws. The most commonly affected level was L1, followed by L2 and D12. Surgical correction of the local kyphotic angle was significantly different in the groups; however, there was no significant difference in the loss of correction of the local kyphotic angle of the groups. Surgical correction of the reduction in the vertebral body height showed statistical significance, while the average loss of correction in the reduction of the vertebral body height was not significantly different. The measurement of the angles made by the screws on the rods was not significantly different between the cannulated (poly-axial head) and solid (mono-axial head) screw groups. Conclusions: Solid screws were superior in terms of providing increased correction of the kyphotic angle and height of the fractured vertebra than the cannulated screws; however, no difference was noted between the screws in the maintenance of the superior and inferior angles of the screw with the rod.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.48 no.4
• /
• pp.474-482
• /
• 2015

This study aims to investigate the patterns and incidence rates of morphological deformities during artificial fingerling production of blackhead seabream (BSB, Acanthopagrus schlegeli) juveniles by visual and soft X-ray observations of BSB juveniles (n=881) collected from four industrial hatcheries. Using both methods, we observed seven types of external deformity ($11.2{\pm}4.4%$) and eight types of skeletal deformity ($53.4{\pm}5.1%$). Lordosis occurred in all hatcheries with the highest frequency and the mean frequency was $13.1{\pm}4.4%$ (24.5% in total abnormal) by soft X-ray. Although they had a similar standard length (SL), juveniles with lordosis had a significantly lower condition factor and body weight than normally developed juveniles (P<0.05); normal distribution curves of histogram of body proportions, i.e., body height (BH)/head length (HL) and trunk (=SL-HL)/BH, indicated differences between normally developed juveniles and those with lordosis. In addition, 59% of juveniles with lordosis had vertebral curvature of less than $20^{\circ}$, generally at the $17^{th}$ vertebrae. It is expected that the above results will be used as basic data necessary for determining the cause of lordosis and for developing techniques to prevent this symptom in the fingering production industry of BSB juveniles.

• Journal of Biomedical Engineering Research
• /
• v.25 no.3
• /
• pp.171-182
• /
• 2004

This study investigates the biomechanical efficacies of vertebroplasty which is used to treat vertebral body fracture with bone cement augmentation for osteoporotic patients using image and finite element analysis. Simulated models were divided into two groups: (a) a vertebral body, (b) a functional spinal unit(FSU). For a vertebral body model, the maximum axial displacement was investigated under axial compression to evaluate the effect of structural integrity. The stiffness of each FE model simulated was normalized by the stiffness of intact model. In the case of FSU model, 3 types of compression fractures were formulated to assess the influence on spinal curvature changes. The FSU models were loaded under compressive pressure to calculate the change of spinal curvature. The results according to the various factors suggest that vertebroplasty has the biomechanical efficacy of the increment of structural reinforcement in a patient who has relatively high level of BMD and a patient with the amount of 15％, PMMA injection of the cancellous bone volume. The spinal curvatures after compression fracture simulation vary from 9$^{\circ}$ to 17$^{\circ}$ of kyphosis compared to that the spinal curvature of normal model was -2.8$^{\circ}$ of lordosis. These spinal curvature changes cause the severe spinal deformity under the same loading. As the degree of compressive fracture increases the spinal deformity also increases. The results indicate that vertebroplasty has the increasing effect of the structural integrity regardless of the amount of PMMA or BMD and the restoration of decreased vertebral body height may be an important factor when the compressive fracture caused the significant height loss of vertebral body.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.1336-1340
• /
• 2003

The compressed fracture of spine caused by osteoporosis is one of the most frequent diseases in bone fracture. Recently the vertebroplasty has drawn much attention as a medical treatment for the compressed fracture of spine, which strengthens the vertebral body and corrects deformity, and relieves pain in patients by injecting bone cement. The purpose of this research is to provide the theoretical background for the vertebroplasty by employing scientific methods and thus to find out the improvements of the conventional surgical method. By applying the engineering analysis tools to clinical study, new application fields can also be obtained

• The Korean Journal of Food And Nutrition
• /
• v.11 no.2
• /
• pp.165-170
• /
• 1998

Diagnostic radiology and conservative management for S75 patient with L1 lumbar fracture by traffic accidents were discussed with references, and then the obtained results were as follows ; 1. Wedging compression fractures with 10% deformity was confirmed at anterior vertebral body of L1 lumbar spine through lateral plain X-ray film. 2. Irregular bony fractures were observed at anterior vertebral body of L1 lumbar spine by CT scans, anatomically T12-L1 sites showed highly frequency of injuries, Denis's fracture type was classified as multiple compression fracture at anterior column without abnormal middle and posterior column, also no Cobb's angle, and then Frankel's neurological classification was E grade. 3. Orthopaedic treatments were performed with conservative methods. With rest on the bed, anti-in-flammatory medication, electrolyte and nutritional solution, the pain diminished. 4. After 3 weeks, rehabilitation was worked with putting on polyethylene back corset, although pains remained slightly until after 8 weeks, thereafter the spine showed gradually stability.

• Journal of the Korean Orthopaedic Association
• /
• v.54 no.4
• /
• pp.336-342
• /
• 2019

Purpose: To examine the relationship between the progression of a kyphotic deformity and the magnetic resonance imaging (MRI) findings in conservatively treated osteoporotic thoracolumbar compression fracture patients. Materials and Methods: This study categorized the patients who underwent conservative treatment among those patients who underwent treatment under the suspicion of a thoracolumbar compression fracture from January 2007 to March 2016. Among them, this retrospective study included eighty-nine patients with osteoporosis and osteopenia with a bone density of less than -2.0 and single vertebral body fracture. This study examined the MRI of anterior longitudinal ligament or posterior longitudinal ligament injury, superior or inferior endplate disruption, superior of inferior intravertebral disc injury, the presence of low signal intensity on T2-weighted images, and bone edema of intravertebral bodies in fractured intravertebral bodies. Results: In cases where the superior endplate was disrupted or the level of bone edema of the intravertebral bodies was high, the kyphotic angle, wedge angle, and anterior vertebral compression showed remarkably progression. In the case of damage to the anterior longitudinal ligament or the superior disc, only the kyphotic angle was markedly prominent. On the T2-weighted images, low signal intensity lesions showed a high wedge angle and high anterior vertebral compression. On the other hand, there were no significant correlations among the posterior longitudinal ligament injury, inferior endplate disruption, inferior disc injury, and the progression of kyphotic deformity and vertebral compression. The risk factors that increase the kyphotic angle by more than 5° include the presence of injuries to the anterior longitudinal ligament, superior endplate disruption, and superior disc injury, and the risk factors were 21.3, 5.1, and 8.5 times higher than those of the uninjured case, and the risk differed according to the level of bone edema. Conclusion: An osteoporotic thoracolumbar compression fracture in osteoporotic or osteopenic patients, anterior longitudinal ligament injury, superior endplate and intravertebral disc injury, and high level of edema in the MRI were critical factors that increases the risk of kyphotic deformity.

• Journal of Biomedical Engineering Research
• /
• v.24 no.4
• /
• pp.369-373
• /
• 2003

The compressed fracture of spine caused by osteoporosis is one of the most frequent diseases in bone fracture. Recently the vertebroplasty has drawn much attention as a medical treatment for the compressed fracture of spine, which strengthens the vertebral body and corrects deformity, and relieves pain in patients by injecting bone cement. But because there were no research about strengthening of mechanical properties of verbral body in bone cement injection, in this study, based on the properties of PMMA, we had measured the Young's modulus for different apparent densities of intact trabecular bone and PMMA injected one from a porcine and a cadaver. Young's modulus to apparent density had a form of a power series in intact trabecular bone and had a linear relation in PMMA injected bone.

• Journal of Korean Neurosurgical Society
• /
• v.50 no.3
• /
• pp.224-230
• /
• 2011

Objective : This study aimed to show the possibility of neural canal enlargement and restoration of bony fragments through laminectomy and minimal facetectomy without pediculectomy or an anterior approach, and also to prove the adequacy of posterior stabilization of vertebral deformities after thoracolumbar bursting fracture. Methods : From January 2003 to June 2009, we experienced 45 patients with thoracolumbar burst fractures. All patients enrolled were presented with either a neural canal compromise of more than 40% with a Benzel-Larson Grade of VI, or more than 30% compromise with less than a Benzel-Larson Grade of V. Most important characteristic of our surgical procedure was repositioning retropulsed bone fragments using custom-designed instruments via laminectomy and minimal facetectomy without removing the fractured bone fragments. Beneath the dural sac, these custom-designed instruments could push the retropulsed bone fragments within the neural canal after the decompression and bone fragment repositioning. Results : The mean kyphotic deformities measured preoperatively and at follow-up within 12 months were 17.7 degrees (${\pm}6.4$ degrees) and 9.6 degrees (${\pm}5.2$ degrees), respectively. The mean midsagittal diameter improved from 8.8 mm (${\pm}2.8$ mm) before surgery to 14.2 mm (${\pm}1.6$ mm) at follow-up. The mean traumatic vertebral body height before surgery was 41.3% (${\pm}12.6%$). At follow-up assessment within 12 months, this score showed a statistically significant increase to 68.3% (${\pm}12.8%$). Neurological improvement occurred in all patients. Conclusion : Though controversy exists in the treatment of severe thoracolumbar burst fracture, we achieved effective radiological and clinical results in the cases of burst fractures causing severe canal compromise and spinal deformity by using this novel custom-designed instruments, via posterior approach alone.