• Korean Chemical Engineering Research
• /
• 제46권6호
• /
• pp.1057-1062
• /
• 2008

기존 2탑 유동층 공정의 단점을 극복하기 위해 두 개의 기포유동층, 고체분사노즐, 상승관 및 고체재순환관으로 구성된 신개념 2탑 유동층 공정을 적용한 3 kW 매체순환식 가스연소기를 개발하였다. 본 연구에서는 3 kW급 매체순환식 가스연소기에서 고체순환속도에 미치는 고체분사노즐 유속, 유동화속도, 고체층 높이, 고체유입구의 단면적, 층 온도 등의 영향을 고찰하였다. 고체순환속도는 고체층 높이가 증가하고 고체유입구의 단면적이 증가할수록 증가하는 경향을 나타내었으며 유동화속도와 온도의 영향은 크지 않았다. 장기연속운전 가능성을 검토하기 위해 50시간까지 고체순환 장기연속운전을 실증하였다. 두 유동층과 고체재순환관의 압력강하 값이 안정적으로 유지되어 고체순환이 원활하고 안정적으로 유지되는 것을 확인하였다.

• Nuclear Engineering and Technology
• /
• 제56권7호
• /
• pp.2576-2583
• /
• 2024

In this paper, the similarity criterion and dimensionless conversion method combined with the elasticity condition and Hooke's law are used to derive the functional relationship of the maximum effective value of the vibration velocity between the prototype pump and the model pump. The seawater circulation pump of a nuclear power plant is used as the prototype pump, and the model pump is obtained by performance conversion and choosing the appropriate scale, and the vibration state of the model pump under different flow rates is measured and analyzed. The vibration data of the model pump through the function relationship to find out the vibration parameters of the prototype model pump, and compare with the vibration data of the seawater circulation pump in reality. It can be seen that with the increase of flow rate, the maximum effective value of the vibration velocity of both model and prototype decreases and then increases, and the relative error is small, the maximum value is 7.7757%. Therefore, it can be considered that the functional relationship of model pump converted to prototype pump derived in this paper can be used to analyze the vibration of the actual seawater circulation pump of coastal nuclear power plant.

• 한국수소및신에너지학회논문집
• /
• 제33권4호
• /
• pp.419-429
• /
• 2022

Effects of operating variables on temperature profile and performance of 3 MWth chemical looping combustion system were estimated by mass and energy balance analysis based on configuration and dimension of the system determined by design tool. Air reactor gas velocity, fuel reactor gas velocity, solid circulation rate, and solid input percentage to fluidized bed heat exchanger were considered as representative operating variables. Overall heat output and oxygen concentration in the exhaust gas from the air reactor increased but temperature difference decreased as air reactor gas velocity increased. Overall heat output, required solid circulation rate, and temperature difference increased as fuel reactor gas velocity increased. However, overall heat output and temperature difference decreased as solid circulation rate increased. Temperature difference decreased as solid circulation rate through the fluidized bed heat exchanger increased. Effect of each variables on temperature profile and performance can be determined and these results will be helpful to determine operating range of each variable.

• 한국환경과학회지
• /
• 제8권5호
• /
• pp.555-558
• /
• 1999

A sea/land breeze circulation system and a regional scale circulation system are formed at a region which has complex terrain around coastal area and affect to the dispersion and advection of air pollutants. Therefore, it is important that atmospheric circulation model should be well designed for the simulation of regional dispersion of air pollutants. For this, Local Circulation Model, LCM which has an ability of high resolution is used. To verify the propriety of a LCM, we compared the simulation result of LCM with an exact solution of a linear theory over a simple topography. Since they presented almost the same value and pattern of a vertical velocity at the level of 1 km, we had a reliance of a LCM. For the prediction of dispersion and advection of air pollutants, the wind filed should be calculated with high accuracy. A numerical simulation using LCM will provide more accurate results over a complex terrain around coastal area.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2006년도 학술발표회 논문집
• /
• pp.1925-1930
• /
• 2006

흐름의 연직분포를 가정하여 수면에서 바닥까지 적분하여 평균화한 방정식에 기초한 준2차원 흐름모형을 연안해역에서의 취송류해석을 위해 적용되었다. 바람장의 변동에 따른 취송류장의 변동이 크게 나타나므로 본 연구에서는 육상지형의 영향을 고려할 수 있는 3차원 중규모 지역기상장 모형을 통해 연안해역에서의 시간에 따른 바람장변동을 수치해석 하였다. 육상에서의 지표면 열수지 변화를 위해 식생모델을 적용하였다. 기상장과 취송류 해석을 위한 수치모형실험결과 바람장의 변동에 따른 연안역에서의 흐름특성을 효과적으로 예측하고 있음을 확인하였다.

• 자동차안전학회지
• /
• 제10권1호
• /
• pp.32-37
• /
• 2018

This paper proposes autonomous speed control strategy for an Electric Vehicle on urban road. SNU campus road is used to reperesent urban road situation. Motor efficiency of driving on campus circulation road can be improved by controlling velocity properly. Given information of campus road, especially slope of road, acceleration is selected from candidate, considering consumed power, human factor and driving time. To apply urban situation, preceding vehicle is also considered. With preceding vehicle, acceleration is defined according to clearance and relative velocity. Acceleration is bounded in normal range. Proposed acceleration control method is activated with proper velocity range for campus circulation road. With acceleration control, motor efficiency becomes better than driving with constant vehicle. To evaluate the performance of proposed acceleration controller, simulation study is conducted via MATLAB.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2004년도 학술대회지
• /
• pp.114-119
• /
• 2004

Floating marina has been interests as an alternative to the facilities for recreational boats because of its cost effectivenes and less environmental conflicts. For tile present research, a square floating marina with a length of 400m and draft of 5m was used. This marina can be extended to 800m by putting anotjer one together. Tidal field around tile marina was simulated using a multi-level finite difference method. Tidal motion was assumed sinusoidal in a closed rectangular bay. Velocities and residual current were investigated for two cases of single marina and two marinas installed in tile bay. It was found that the horizontal velocity fields from the water surface to the structure bottom around tile marina were affected. In the marina basin, magnitude of velocity was reduced considerably but overall quality of water circulation was preserved even after two marina were installed.

• 대한기계학회논문집B
• /
• 제25권11호
• /
• pp.1527-1534
• /
• 2001

Phase averaged velocity fields in the near wake region behind a square cylinder have been (successfully) obtained using randomly sampled PIV data sets. The Reynolds number based on the flow velocity and the vertex height was 3,900. To identify the phase information, we examined the magnitude of circulation and the center of peak vorticity. The center of vorticity was estimated from lowpass filtered vorticity contours (LES decomposition) adopting a sub-pixel searching algirithm. Due to the sinusoidal nature of firculation which is closely related to the instantaneous vorticity, the location of peak voticity fits well with a sine curve of the circulation magnitude. Conditionally-averaged velocity fields represent the barman vortex shedding phenomenon very well within 5 degrees phase uncertainty. The oscillating nature of the separated shear layer and the separation bubble at the top surface are clearly observed. With the hot-wire measurements of Strouhal frequency, we found thats the convection velocity changes its magnitude very rapidly from 25 to 75 percent of the free stream velocity along the streamwise direction when the flow passes by the recirculation region.

• 한국양식학회지
• /
• 제14권1호
• /
• pp.43-50
• /
• 2001

To study the effect of paddle wheel on water circulation, velocity components were measured in shrimp ponds both along the longitudinal direction from a single paddle wheel and at 25 grid points of two ponds, which have mean water depth of 1.2m and aspect ratio (length/width) 1.05 and 0.68, respectively. An analysis of factors related to water quality and circulation showed that I) a single paddle wheel has an effective distance of 33m for de-stratification, 16m for particulate suspension and 25m for removal of organic material, dispersion of DO and prevention of bed sediment disturbance and ii) with doubling the number of paddle wheels at the pond corners, the flow speed increased by 13% over the ponds, while it reduced by 8.5% around the pond centres. Contrary to expectation, increasing the number of paddle wheel did not generate strong circulation around the pond centre and improve water quality.

• 한국수학교육학회지시리즈D:수학교육연구
• /
• 제4권2호
• /
• pp.57-62
• /
• 2000

we motivate the of the velocity field of a fluid in three ways: from a calculation of the velocity of a rotating fluid relative to a coordinate system rotating with the fluid and from two calculations of a vector form of circulation in small circles or spheres suspended in a moving fluid.