• 한국전산유체공학회지
• /
• 제15권3호
• /
• pp.39-45
• /
• 2010

The turbulent flows in a tunnel mock-up($10L{\times}0.5W{\times}0.25H$ m3 : scale reduction 1/20) with rectangular cross section were investigated. The instantaneous velocity fields of Re = 49,029, 89,571 were measured by the 2-D PIV system which is consisted of double pulsed Nd:Yag laser and the tracer particles in the straight-duct mock-up where the flows were fully developed. The mean velocity profiles were taken from the ensemble averages of 1,000 instantaneous velocity fields. Simultaneously, numerical simulations(RANS) were performed to compare with experimental data using STREAM code. Non-linear eddy viscosity model (NLEVM : Abe-Jang-Leschziner Eddy Viscosity Model) was employed to resolve the turbulent flows in the duct. The calculated mean velocity profiles were well compared with PIV results. In the log-law profiles, the experimental data were in good agreement with numerical simulations all the way to the wake region except the viscous sub-layer (near wall region).

• Korean Chemical Engineering Research
• /
• 제46권5호
• /
• pp.922-930
• /
• 2008

질소산화물($NO_x$) 저감을 위한 선택적 무촉매 환원(SNCR; selective non-catalytic reduction) 공정의 성능은 유속, 반응온도 그리고 반응물간의 혼합과 같은 공정변수에 민감하다. 따라서 효율적인 SNCR 공정의 설계와 운전을 위하여 속도장, 온도장, 및 화학물질들의 농도 분포에 대한 이해가 필수적이다. 본 연구에서는 150 kW LPG 버너가 장착되고, 요소용액을 환원제로 사용하는 파일럿 규모 SNCR 공정에 대하여 액적모델과 결합된 2차원 난류반응흐름 전산유체역학(CFD; computational fluid dynamics) 모델을 개발하고, 이 모델은 실험결과를 통하여 검증된다. 난류반응 CFD 모델에서는 $NO_x$저감율과 $NH_3$-slip을 예측하기 위하여 7개 반응식으로 이루어진 요소용액과 $NO_x$와의 반응기작을 이용한다. 이러한 모델을 이용한 CFD 모사결과는 온도와 NSR(normalized stoichiometric ratio)에 따른 $NO_x$ 저감율에서 실험결과와 최대 20% 이내에서 차이를 보여주고 있으며, $NH_3$-slip에 대하여는 실험결과와 모사결과 사이에 유사한 경향성을 얻었다.

• 설비공학논문집
• /
• 제15권12호
• /
• pp.1007-1017
• /
• 2003

An experimental study on the air-side pressure drop and heat transfer coefficient of slit fin-tube heat exchanger has been carried out. The data reduction methodology for air-side heat transfer coefficients in the literature is not based on a consistent approach. This paper focuses on new method of data reduction to obtain the air-side performance of fin-tube heat exchanger using R22 and recommends standard procedures for dry and wet surface heat transfer estimation in fin-tube heat exchanger having refrigerant on the tube-side. Results are presented as plots of friction f-factor and Colburn j -factor against Reynolds number based on the fin collar outside diameter and compared with previous studies. The data covers a range of refrigerant mass fluxes of 150∼250 kg/$m^2$s with air flows at velocity ranges from 0.3 m/s to 0.8 m/s.

• 설비공학논문집
• /
• 제15권3호
• /
• pp.220-229
• /
• 2003

An experimental study on the air-side pressure drop and heat transfer coefficient of slit fin-tube heat exchanger has been carried out. The data reduction methodology for air-side heat transfer coefficients in the literature is not based on a consistent approach. This paper focuses on new method of data reduction to obtain the air-side performance of fin-tube heat exchanger using R22 and recommends standard procedures for dry surface heat transfer estimation in fin-tube heat exchanger having refrigerant on the tube-side. Results are presented as plots of friction f-factor and Colburn j -factor against Reynolds number based on the fin collar outside diameter and compared with previous studies. The data covers a range of refrigerant mass fluxes of 150~250 kg/$m^2$s with air flows at velocity ranges from 0.6 m/s to 1.6 m/s.

• 대한조선학회논문집
• /
• 제41권4호
• /
• pp.59-67
• /
• 2004

Direct numerical simulations of turbulent flows over riblet-mounted surfaces are performed to educe the mechanism of drag reduction by riblets. Numerical simulations are performed for flow fields with R $e_$\tau$/=180. For riblet ridge angle $\alpha$=60$^{\circ}$, two different riblet spacings of $s^+/=20 and 40 are used in this study. The computed drag on the riblet surfaces is in good agreement with existing computational and experimental data. The mean velocity profiles show upward and downward shifts in the log-law for drag-decreasing and drag-increasing cases, respectively Turbulence statistics above the riblets are computed and compared with those above a flat plate. The purpose of this study is in two categories: first, to understand the drag reduction mechanism on riblet surface, second, to verify our own code by comparison of the present results with those from previous studies.udies.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2009년도 하계학술발표대회 논문집
• /
• pp.863-868
• /
• 2009

The drag reduction(DR) for Betaine+Amin and Xantan Gum as kinds of surfactant and Polyacrylamide as kinds of polymer solution according to the fluid velocity, temperature and surfactant concentration were compared experimentally. For this study, two kinds of experimental apparatus for short time and long time measurement were established. Each experimental appratus was equipped with hot water storage tanks, pumps, testing pipe network, flowmeter, two pressure gauges and data logging system was built for them. Results showed that Betaine+Amin and Xanthan Gum as kinds of surfactant had appeared optimal DR around 200-500 ppm and their DR tended to be decreased when flow velocity increased but Polyacrylamide as kinds of polymer solution showed the opposite trend to be increased when flow velocity increased. The both of them showed above 40% DR in the case of better condition by the short term measurement. But Polyacrylamide as kinds of polymer solution showed more degradation than Betaine+Amin and Xanthan Gum as kinds of surfactant by the long term measurement. As a result, Betaine+Amin and Xanthan Gum as kinds of surfactant showed better materials to use to the district heating system.

• 대한토목학회논문집
• /
• 제43권5호
• /
• pp.621-630
• /
• 2023

본 연구에서는 원통형 대책구조물의 토석류 에너지 저감효과를 확인하기 위해, 대책구조물이 설치된 실제 규모의 계곡부를 수치적으로 모사한 후에 대책구조물의 배치조건을 변화시켜가면서 토석류 수치해석을 수행하였다. 해석단면은 강원도 진부면 실규모 실험장에서 측량된 지상 LiDAR 데이터를 토대로 계곡부를 모델링하였고, 해석은 ABAQUS (Ver. 2021)의 Smooth Particle Hydrodynamics (SPH) 기법을 이용하여 토석류-구조물의 상호 흐름거동을 모사하였다. 해석결과, 대책구조물이 설치되지 않는 조건에서의 흐름속도는 기존 실규모 토석류 실험결과와 유사한 흐름속도 변화를 보이는 것으로 나타났으며, 원통형 대책구조물을 설치하면 토석류의 속도를 크게 감소시키는 것으로 나타났다. 또한, 대책구조물을 높이면 토석류의 흐름저항이 증가함에 따라 하류부의 에너지 저감효과를 더욱 증가시키는 것으로 나타났다.

• 대한기계학회논문집B
• /
• 제38권1호
• /
• pp.63-70
• /
• 2014

본 연구에서는 상대적으로 얇은 두께의 스트럿을 가진 스텐트를 적용하여 스텐트의 공극률(80%, 74% 및 64%)에 따른 뇌동맥류 내부 유동 특성 변화를 이해하고자 CFD 해석을 수행하고, 기존의 발표된 실험 결과와 비교하였다. 수치해석 방법으로는 이차의 사면체 요소(quadratic tetrahedral element) 기반의 유한요소해석(FEM) 코드를 이용하였다. 뇌동맥류 내부 평균유속 감소비의 정량적인 면에서는 실험결과와 약간의 차이를 보였으나, 스텐트 공극률에 따른 뇌동맥류 내부 유동장 패턴 및 평균유속 감소의 상대적 특성 등은 비교적 잘 일치하는 것을 확인할 수 있었다. 또한 본 연구에서 고려한 가장 높은 80% 공극률을 가지는 스텐트의 경우에도 비교적 우수한 뇌동맥류 유입 유속 감소 효과를 가짐을 확인할 수 있었으며, 이보다 더 낮은 공극률을 가진 스텐트의 경우에는 약간의 추가적인 뇌동맥류 유입 유속 감소 효과를 가지나, 유속 및 벽전단응력 등의 혈류역학적 특성은 큰 변화가 없음을 알 수 있었다.

• 천문학회보
• /
• 제37권1호
• /
• pp.75.1-75.1
• /
• 2012

We have observed the part of the second quadrant of the Galactic Plane in $^{13}CO(1-0)$ using the multibeam receiver system installed on the 14 m telescope at Taeduk Radio Astronomy Observatory. The target region (L=108 to 112.5) is the part of the $^{12}CO$ Outer Galactic Plane Survey (Heyer et al. 1998), and it is for the exact Galactic plane with the latitude range of +1 and -1 degree. Total of 48,000 spectra (about 9 square degees) were obtained on 50" grid. The selected velocity resolution is 0.63 km/sec and sensitivity per channel is 0.17 K, and the covered velocity is 320 km/sec. We developed a new reduction method, which effectively deals with a relatively noisy 3-dimensional database. The collected $^{13}CO$ database will be manipulated with pre-existing $^{12}CO$ data to get several physical parameters. As it is located in the second quadrant, the kinematic distances of the individual clouds, which will be identified, can be estimated relatively easily without any distance ambiguity. In this meeting we present the reduction method, statistics, and some channel maps, integrated intensity maps, and spatial-velocity maps. We intend to clarify any difference of their characteristics between the clouds in the Outer Galaxy and Inner Galaxy using our data base.

• 말소리와 음성과학
• /
• 제12권2호
• /
• pp.17-27
• /
• 2020

This paper examines kinematic characteristics of /pk/ clusters, as compared to /kk/ and /pp/ with varying vowel contexts and speech rate. The results of EMMA data from eight Seoul-Korean speakers indicate as follows. Firstly, comparing /pk/ to /pp/ sequences, lips closing movement was faster and spatially greater in the /a/-to-/a/ context while temporally longer in the /i/-to-/i/ context. It was smaller in spatial displacement and shorter in temporal duration in /pk/ sequences. Peak velocity did not vary. Secondly, comparing /pk/ with /pp/ and /kk/ controls, lip aperture was less constricted in the /a/-to-/a/ context than /i/-to-/i/, but the maximum contact between the upper and lower lips was invariant across different vocalic contexts within /pk/ sequences (/apka/=/ipki/). Categorical reduction of C1 in /pk/ sequences fell in with the low-vowel and fast-rate conditions with across-/within-speaker variability. Gradient reduction of C1 was observed in all C1C2 types, being more frequent in fast rate. Lastly, the jaw articulator was a stable indicator of rate effects. The implication of the current study is that gestural reduction occurs with categorical reduction and general spatiotemporal weakening in the assimilating contexts, while quantitative properties of gestures may be a reason for gradient reduction, not necessarily confined to place assimilation.