• Convergence Security Journal
• /
• 제21권1호
• /
• pp.129-135
• /
• 2021

Greedy protocols show good performance in Vehicular Ad-hoc Networks (VANETs) environment in general. But they make longer routes causing by surroundings or turn out routing failures in some cases when there are many traffic signals which generate empty streets temporary, or there is no merge roads after a road divide into two roads. When a node selects the next node simply using the distance to the destination node, the longer route is made by traditional greedy protocols in some cases and sometimes the route ends up routing failure. Most of traditional greedy protocols just take into account the distance to the destination to select a next node. Each node needs to consider not only the distance to the destination node but also the direction to the destination while routing a packet because of geographical environment. The proposed routing scheme considers both of the distance and the direction for forwarding packets to make a stable route. And the protocol can configure as the surrounding environment. We evaluate the performance of the protocol using two mobility models and network simulations. Most of network performances are improved rather than in compared with traditional greedy protocols.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• 제20권4호
• /
• pp.75-87
• /
• 2010

Secure communication has been one of the main challenges in vehicular ad hoc networks(VANET) since broadcast messages from nearby vehicles contain life-critical information for drivers and passengers. So far various secure communication schemes have been proposed to secure the communication in VANET, and they satisfy most security requirements. However most of them need to put trust on roadside units(RSUs), which are usually deployed in unattended area and vulnerable to compromise. In this paper, we propose a secure communication scheme, which does not need to put trust on RSUs. And we adopt a grouping technique to averagely divide the huge burden in the server without jeopardizing the anonymity of users. Moreover we design a complete set of protocols to satisfy common security requirements with a relatively lower hardware requirement. At last, we evaluate the scheme with respect to security requirements, communication overhead, storage overhead and network performance.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• 제19권4호
• /
• pp.105-114
• /
• 2009

Messages exchanged among vehicles must be authenticated in order to provide collision avoidance and cooperative driving services in VANET. However, digitally signing the messages can violate the privacy of users. Therefore, we require authentication systems that can provide conditional anonymity. Recently, Zhang et al. proposed conditionally anonymous authentication system for VANET using tamper-resistant hardware. In their system, vehicles can generate identity-based public keys by themselves and use them to sign messages. Moreover, they use batch verification to effectively verify signed messages. In this paper, we provide amelioration to Zhang et al.'s system in the following respects. First, we use a more efficient probabilistic signature scheme. Second, unlike Zhang et al., we use a security proven batch verification scheme. We also provide effective solutions for key revocation and anonymity revocation problems.

• Tribology and Lubricants
• /
• 제36권6호
• /
• pp.385-390
• /
• 2020

It rains heavily, such as long rain and typhoons, during a typical rainy season in Korea. In this season, several fuel contamination accidents by water and vehicular problems caused by water contaminated fuel occur. Many research groups have studied the effects of water contaminated fuel on vehicles and environment. However the characteristics of water contaminated fuel have not been studied. In this study, we prepared diesel samples with a constant ratio of water (0~30 volume %) using an emulsifier. Then, we analyzed these diesel samples for their representative fuel properties. In the analytical results, diesel with 30% water showed an increase in fuel properties such as density (823→883 kg/㎥), kinematic viscosity (2.601→6.345 ㎟/s), flash point (47→56℃), pour point (-22→2℃), CFPP (cold filter plugging point) (-17→20℃) and copper corrosion number (1a→2a). The low temperature characteristics, such as low pour point and CFPP, blocks the fuel filter in the cold season. In addition, water contaminated diesel decreases lubricity (190→410 ㎛) under high frequency reciprocating rig (HFRR) and derived cetane number (54.81→34.25). The low lubricity of fuel causes vehicle problem such as pump and injector damage owing to severe friction. In addition, the low cetane diesel fuel increases exhaust gases such as NOx and particulate matters (PM) owing to incomplete combustion. This study can be used to identify the problems caused by water contamination to vehicle and fuel facilities.

• Journal of Environmental Science International
• /
• 제30권3호
• /
• pp.219-234
• /
• 2021

Industrial emissions, mainly from industrial complexes, are important sources of ambient Volatile Organic Compounds (VOCs). Identification of the significant VOC sources from industrial complexes has practical significance for emission reduction. VOC samples were collected from July 2019 to June 2020. A Positive Matrix Factorization (PMF) receptor model was used to evaluate the VOC sources in the area. Four sources were identified by PMF analysis, including coating-1, coating-2, printing, and vehicle exhaust. The coating-1 source was revealed to have the highest contribution (41.5%), followed by coating-2 (23.9%), printing (23.1%), and vehicle exhaust (11.6%). The source showing the highest contribution was coating emissions, originating from the northwest to southwest of the sample site. It also relates to facilities that produce auto parts. The major components of VOC emissions from the coating facilities were toluene, m,p-xylene, ethylbenzene, o-xylene, and butyl acetate. Industrial emissions should be the top priority to meet the relevant control criteria, followed by vehicular emissions. This study provides a strategy for VOC source apportionment from an industrial complex, which is helpful in the development of targeted control strategies.

• Journal of Advanced Navigation Technology
• /
• 제24권6호
• /
• pp.521-526
• /
• 2020

In this paper, we propose a design method and process for hybrid V2X communication platform that combines WAVE communication and LTE-V2X communication which are C-ITS communication protocols for vehicle environments and Legacy LTE communication which is a commercial mobile communication for evaluating the autonomous platooning platform of commercial vehicles. For a safe and efficient autonomous platooning platform, an low-latency communication function based on C-ITS communication is required, and to control it, commercial communication functions such as Legacy LTE, which can be connected at all times, are required. In order to evaluate such a system, the evaluation equipment must have the same level of communication performance or higher. The main design contents presented in this paper will be applied to the implementation of hybrid V2X terminals for functional evaluation.

• The Journal of the Convergence on Culture Technology
• /
• 제8권4호
• /
• pp.367-373
• /
• 2022

VANET (Vehicular Ad hoc NETwork) is one of the special cases of the ad hoc networks in which car nodes communicate with each other and/or with RSUs (Road Side Unit) in order for the drivers to receive nearby road traffic information as well as for the passengers to retrieve nearby gas price or hotel information. In case of constructing VANET over CCN, users do not need to specify a destination server address rather to input a key word such as nearby congestion in order to gather surrounding traffic congestion information. Furthermore, each car node caches its retrieved data for forwarding other nodes when requested. In addition, the data transmission is inherently multicast, which implies fast data propagation to the participating car nodes. This paper measures and evaluates the data transmission performance of the VCCN (VANET over CCN) in which nodes are equipped with diverse wireless communication channels. The simulation result indicates that 802.11a shows the best performance of the data transmission against other wireless channels. Moreover, it indicates that VCCN improves overall data transmission and provides benefit to the nodes that request the same traffic information by exploiting inherent multicast communication.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제16권10호
• /
• pp.3438-3457
• /
• 2022

As location-based services (LBS) are widely used in vehicular ad-hoc networks (VANETs), location privacy has become an utmost concern. Spatial cloaking is a popular location privacy protection approach, which uses a cloaking area containing k-1 collaborative vehicles (CVs) to replace the real location of the requested vehicle (RV). However, all CVs are assumed as honest in k-anonymity, and thus giving opportunities for dishonest CVs to submit false location information during the cloaking area construction. Attackers could exploit dishonest CVs' false location information to speculate the real location of RV. To suppress this threat, an edge-assisted Trusted Collaborative Anonymity construction scheme called TCA is proposed with trust mechanism. From the design idea of trusted observations within variable radius r, the trust value is not only utilized to select honest CVs to construct a cloaking area by restricting r's search range but also used to verify false location information from dishonest CVs. In order to obtain the variable radius r of searching CVs, a multiple linear regression model is established based on the privacy level and service quality of RV. By using the above approaches, the trust relationship among vehicles can be predicted, and the most suitable CVs can be selected according to RV's preference, so as to construct the trusted cloaking area. Moreover, to deal with the massive trust value calculation brought by large quantities of LBS requests, edge computing is employed during the trust evaluation. The performance analysis indicates that the malicious response of TCA is only 22% of the collaborative anonymity construction scheme without trust mechanism, and the location privacy leakage is about 32% of the traditional Enhanced Location Privacy Preserving (ELPP) scheme.

• KIPS Transactions on Computer and Communication Systems
• /
• 제11권12호
• /
• pp.437-444
• /
• 2022

Recently, research on mobile edge services has been conducted to handle computationally intensive and latency-sensitive tasks occurring in wireless networks. However, MEC, which is fixed on the ground, cannot flexibly cope with situations where task processing requests increase sharply, such as commuting time. To solve this problem, a technology that provides edge services using UAVs (Unmanned Aerial Vehicles) has emerged. Unlike ground MEC servers, UAVs have limited battery capacity, so it is necessary to optimize energy efficiency through load balancing between UAV MEC servers. Therefore, in this paper, we propose a load balancing technique with consideration of the energy state of UAVs and the mobility of vehicles. The proposed technique is composed of task offloading scheme using genetic algorithm and task migration scheme using Q-learning. To evaluate the performance of the proposed technique, experiments were conducted with varying mobility speed and number of vehicles, and performance was analyzed in terms of load variance, energy consumption, communication overhead, and delay constraint satisfaction rate.

• Journal of Preventive Medicine and Public Health
• /
• 제55권1호
• /
• pp.49-59
• /
• 2022

Objectives: Access to maternal and neonatal care services (MNCS) is an important goal of health policy in developing countries. In this study, we proposed a 3-level hierarchical location-allocation model to maximize the coverage of MNCS providers in Iran. Methods: First, the necessary criteria for designing an MNCS network were explored. Birth data, including gestational age and birth weight, were collected from the data bank of the Iranian Maternal and Neonatal Network national registry based on 3 service levels (I, II, and III). Vehicular travel times between the points of demand and MNCS providers were considered. Alternative MNCS were mapped in some cities to reduce access difficulties. Results: It was found that 130, 121, and 86 MNCS providers were needed to respond to level I, II, and III demands, respectively, in 373 cities. Service level III was not available in 39 cities within the determined travel time, which led to an increased average travel time of 173 minutes to the nearest MNCS provider. Conclusions: This study revealed inequalities in the distribution of MNCS providers. Management of the distribution of MNCS providers can be used to enhance spatial access to health services and reduce the risk of neonatal mortality and morbidity. This method may provide a sustainable healthcare solution at the policy and decision-making level for regional, or even universal, healthcare networks.