• Journal of the Korean Institute of Landscape Architecture
• /
• v.40 no.5
• /
• pp.73-87
• /
• 2012

Nowadays, the Korean society is full of multiculturalism as there are many foreign ethnic enclaves. Many Chinese quarters are built in various parts of Korea along with the increasing population of Chinese immigrant. Especially, the Chinese quarter has shown the sign of time and the cultural characteristic of the local residents. This research is to study the market space of Chinese ethnic enclaves in Dairimdong. This research method is the field study to use a participant observation. Below are the research results: Chinese merchants put a private object such as "tanzi" on a sidewalk and install large awning covered full of sidewalk. Sidewalk transform from an outdoor space into an internal space because of Chinese merchants. Passers-by move to use vehicle roads and transform not only the car's space but also the passers-by space. Urban planners originally classify space into three categories, which are building - sidewalk - vehicles road. However, after Chinese came to the market, Chinese classified space into new three categories which is building - space for both sidewalk and "tanzi" - space for both sidewalk and vehicles road. New classification of space is quite different from the previous. In addition, Chinese thinks that the Dairimdong's Market is a very comfortable place. Because Dairimdong Market have many Chinese physical facilities. Next, Chinese thinks that the Dairimdong Market is a very friendly place to buy Chinese products easily. This market has become a place of consumption for the Chinese. Eventually, Dairimdong's Market has changed because of Chinese immigrants. It is possible to make satisfactory planning and design proposal to build Chinese quarters in the future through the explanation of space and status by way of culture. There are many careless mistakes in previous subjective planning and design proposal of the designers. Thus, it should consider the problems created by their way of use in later planning and design.

• The Korean Journal of Air & Space Law and Policy
• /
• v.31 no.2
• /
• pp.37-72
• /
• 2016

In the aerospace field, besides special purpose airplanes, contracts for supply of various types of products such as prototypes, unmanned aerial vehicles and space launch vehicles are increasing. In the case of the contractor, it was planned to spend a large amount of money to supply the production, but if the purchase specification that presents the quality and performance standard of the product is poor or lacks the capacity to judge the performance, consuming enormous amounts of time and money. Even if the undertaker does not have the ability to supply the products with the required performance and quality to achieve the purpose of the contract, he/she must pay the cost of burial due to the incompleteness of the work and the compensation for the cancellation of the contract. In this case, the defendant ordered the plaintiff to supply the aircraft by the Happy Box method, which is capable of ILS Offset flight as specified in the Purchase Specification, but the plaintiff attempted to supply the aircraft by the RNAV method. Although the ILS ground signal can be inspected by the RNAV method, the aircraft manufactured in the manner claimed by the plaintiff does not have the ILS Offset flight function required by the purchase specification, so the defendant can not achieve the purpose required by the purchase specification. It was a question of whether a defendant's cancellation of contract was legitimate. The aircraft, which is the object of this contract, is a subordinate substitute, so the case contract is of undertaking. Therefore, in order to complete the work in this contract, the major structural parts of the aircraft must be manufactured as agreed and have the performance generally required in the social sense. However, the aircraft delivered by the plaintiff has serious defects because the defendant can not achieve the purpose required by the purchase specification due to the lack of the ILS Offset flight function required by the purchase specification. This deficiency is impossible for the plaintiff to repair, so the defendant 's cancellation of the contract is legitimate.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.37 no.8
• /
• pp.717-724
• /
• 2013

Urea-SCR technology is known as one of the powerful NOx reduction systems for vehicles as well as stationary applications. For its consistent and reliable operation in vehicle applications, however, the freezing and melting of the urea solution in cold environments have to be resolved. In this study, therefore, a numerical study of three-dimensional unsteady problems was analyzed to understand the urea freezing and heating phenomena and heat transfer characteristics in terms of urea liquid volume fraction, temperature profiles, and phase change behavior in urea solutions with time by using the commercial software Fluent 6.3. As a result, it was found that the freezing phenomenon proceeds with a phase change from the tank wall to the center, whereas the melting phenomenon occurs faster in the upper part of the storage tank by natural convection and in the adjacent part of the coolant pipe than in other parts. Furthermore, approximately 190 s were required to obtain 1L of urea solution using a 4-coiled coolant heater under conditions of $70^{\circ}C$ and 200 L/h.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.13 no.1
• /
• pp.86-98
• /
• 2014

Currently, many OBUs(On Board Unit)s were installed on the vehicle because ETCS(Electronic Toll Collection System) using DSRC(Dedicated Short Range Communication) was constructed in the tollgate of the whole country.A research development and the commercialization utilizing the One Card All Pass and those Infrastructures of ETCS, are promoting of ITS services. Although many studies of the application method about the One Card All Pass of ETCS have been made, standards about the application method of the One Card All Pass and payment for the provision of traffic convenience, were not made clear. So we are proposed method that One Card All Pass announced by Ministry of Land, Infrastructure and Transport, takes advantage of the existing DSRC-based to apply ETCS. We have confirmed the performance of the system through a variety of driving test using three test vehicles on trial operation site and ETCS applying application method proposed in this study. As a result of driving test, we have confirmed validity of standard application method proposed in this study through the communication success rate of about 99% and analyzed problem that may occur by applying service parts of ETCS of transportation convenience facilities because of about 1% communication failure rate.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.6
• /
• pp.266-274
• /
• 2020

This paper reports a means of improving the abnormal noise of light tactical vehicles (LTVs) by applying a vehicle fitting type generator (hereinafter called generator). LTVs are classified as having generators, and there are no differences in the noise level. On the other hand, quality improvement was performed in response to unpleasant noise felt by the user (hereinafter called abnormal noise) during vehicle operation. To improve the quality, the generator mounting structure and the phenomenon of the vehicle in the problem were identified. Through this, it was confirmed that the noise caused by the generator installation was the rattle noise. Rattle noise at the engine driving system is normally caused by the transfer of irregular torque generated by the engine power stroke and the backlash by the spline-serration fitting structure between the engine coupler and rotor assembly in a generator. Therefore, this study established an improvement plan to apply a damper coupler to solve the cause of the abnormal noise. Regarding the improved establishment method, the improvement effect was confirmed from the influence of the irregular torque of the engine, noise level, dynamic characteristics analysis, and the endurance test of the parts.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.6
• /
• pp.103-108
• /
• 2016

The size of urban areas is currently growing and the functions of cities are becoming increasingly complicated. Furthermore, more people are living in cities. The life of urban is getting closer and linked with neighboring people in many parts. In particular, people are making artificial noise, even though it might not consciously be noticed, in their daily live. Seoul is the most crowded place in Korea and the noise levels are 73dB or higher. People living in cities are exposed to noise pollution. In particular, loudspeakers used during demonstrations or to generate publicity, cause considerable noise, which in turn can be related to stress. Moreover, the noise restrictions defined by law are not adhered to. If enhanced noise regulations, no matter how residents are not forced to be a great stress field close to the noise and reduces the loudness -5dB do not feel well if the difference. Limiting the duration of noise rather than reducing the volume thus is a much more plausible way of reducing the damage caused by noise pollution. If the stress caused by the noise, you will see people or vehicles holding a megaphone at the roadside is not good for health if it may be a wise way to live that is getting rid of the noise pollution so quickly out of the area.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.2
• /
• pp.592-597
• /
• 2013

The heat generated at the motor and inverter inside the electric compressor of inverter built-in type is mainly cooled by refrigerant and generally, there is not a thermal problem. However, the close relation of heat transfer from the motor and inverter parts to the compression part affects on compressor efficiency. Also, according to the surrounding environment and system operation condition, the increased temperature of the motor and inverter can affect the power density of the motor system, and especially, the inverter may be prevented to operate by the temperature limits. In this study, we performed thermo-flow analysis of electric compressor motor system, and investigated the heat dissipation enhancement of the motor and inverter. The motor part in the operation region of the electric compressor was generally maintained at low temperature and the inverter part at high compressor speed was lower temperature than the temperature limit of $85^{\circ}C$. However, the case of the inverter at low speed harsh condition was in excess of $10^{\circ}C$. Therefore, in order to solve the thermal problem, the heat reduction technology of the motor and inverter is essential as well as the improvement of flow path in the compressor.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.10
• /
• pp.1359-1366
• /
• 2010

Recently, many electronic control techniques for vehicles have been developed and applied. One of the technologies can be X-by-wire such as throttle-by-wire, brake-by-wire, steer-by-wire, and etc, in which most of mechanical parts are replaced into electrical wire and actuators. In this study, the effect of throttle-by-wire and brake-by-wire control systems on vehicle velocity control, especially in a school zone, are taken into consideration. The number of accidents reported in school zones is higher than that in other places. The reason for this is that many vehicle drivers do not obey speed limit regulations. Moreover, some of the students are careless while crossing the streets. Therefore, in this study, we attempt to develop a method using throttle-by-wire and brake-by-wire control systems for automatically reducing the vehicle speed such that it will be within the speed limit. First, an engine model and a transmission system model are developed for a specific vehicle model. Second, speed reduction is carried out such that the reduction follows a pre-designed cubic spline trajectory; the trajectory is determined such that rapid deceleration, which causes discomfort to the driver and passengers, can be prevented, for which a fuzzy-PID control algorithm is applied for the trajectory following control. Finally, simulation results are presented to verify the performance of the proposed speed reduction control system.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.21 no.6
• /
• pp.887-895
• /
• 2019

Recently, the number of underground road development projects has been increasing to solve traffic problems in the national capital region and metropolitan areas with intensified overcrowding, and there has been a tendency to plan underground roads by applying a double-deck tunnel technology that has advantages in constructability and economical efficiency. The double-deck tunnel has a structure where one excavation section is divided into two parts and used as up and down lines, and is mainly used as a road for small vehicles only due to its low floor height. In addition, due to the small cross-sectional area, it has characteristics different from those of general road tunnels in terms of ventilation and disaster prevention. In this regard, this study proposed an operational plan that applies an oversized exhaust system, which is one of semi-transverse ventilation systems, to small cross-sectional tunnels like double-deck tunnel with low floor height, and a comparative analysis between smoke exhaust characteristics according to the fire occurrence locations and oversized exhaust systems was conducted using the Fire Dynamics Simulator (FDS). The results showed that unlike uniform exhaust, intensive smoke exhaust using the oversized exhaust port maximized the delay effect of smoke diffusion and limited the smoke within 50 m above and below the fire point.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.3
• /
• pp.209-214
• /
• 2017

Most of the present potential transformers of train vehicles are of the oil-type filled with insulating oil and are susceptible to problems such as explosion due to the increase in the internal pressure during train operation and poor reliability near the end of their life cycle. As a solution to this problem, it is necessary to develop a molded dry-type potential transformer with excellent pressure-resistance performance using insulating resin. In order to localize the product, the Korea Railroad Research Institute has been developing a molded dry-type potential transformer. As part of this research, it is necessary to analyze the vibration characteristics of the developed product and to check the transformer performance in a vibration environment. In this study, a resonance test and simulated long-term life test of the developed product were conducted according to the KS R 9144 and IEC 61373 standards, respectively, which are vibration test methods for railway vehicle parts. Their natural frequencies were analyzed by comparing the results of the numerical modal analysis and resonance test, in order to confirm their adherence to the standards. Also, the performance test after the simulated long-term life test confirmed that the operation of the developed transformer was not problematic even in a long-time vibration environment.