• 한국자동차공학회논문집
• /
• 제13권2호
• /
• pp.108-113
• /
• 2005

The damageability and repairability of similar platform type vehicles could be very concerned with design optimization. In all the vehicles crash tested, small size passenger vehicles were weakness in aspect of damageability and repairability. The most critical area appears to be repair cost considering that parts cost is the largest portion of total repair cost segments. Besides repair cost, attaching method of front sidemember and subframe are placed special importance for impact energy absorption and damageability and repairability. So in order to improve damageability and repairability of vehicle structure and body component of the monocoque type passenger vehicles, the end of front side member and front back beam should be designed with optimum level and to supply the end of front side member as a partial condition approx 300mm. The effectiveness of design concept on the 40% offset frontal impact characteristics of the passenger vehicle structure is investigated and summarized.

• 드라이브 ㆍ 컨트롤
• /
• 제11권2호
• /
• pp.16-21
• /
• 2014

The purpose of this paper is to construct a control algorithm for improving the driving efficiency of 4-wheel-drive in-wheel electric vehicles. The main parts of the vehicle were modeled and the input-output relations of signals were summarized using MATLAB/Simulink. A performance simulator for 4-wheel-drive in-wheel electric vehicles was developed based on the co-simulation environment with a commercial dynamic behavior analysis program called Carsim. Moreover, for improving the driving efficiency of vehicles, a torque distribution algorithm, which distributes the torque to the front and rear wheels, was included in the performance simulator. The effectiveness of the torque distribution algorithm was validated by the SOC simulation using the FTP-75 driving cycle.

• 소성∙가공
• /
• 제32권6호
• /
• pp.352-359
• /
• 2023

Recently, independent suspension systems have been applied not only to passenger cars but also to large commercial vehicles. Therefore, the need for research to domestically produce such independent suspensions for large commercial vehicles is gradually increasing. In this paper, we conducted research on the manufacturing technology of the relay lever, which are integral components of independent suspension systems for large commercial vehicles. Our goal was to reduce the flash volume generated during the forging process. The shape variables of the initial billet were adjusted to find proper forming conditions that could minimize flash volume while performing product forming smoothly. Shape variables were set as input variables and the flash volume was set as an output variable, and simulations were carried out to analytically predict the volume of the flash area for each variable condition. Based on the data obtained through numerical simulations, a regression model and an artificial neural network model were used to develop a prediction model that can easily predict the flash volume for variable conditions. For the corresponding prediction model, a goodness of-fit test was performed to confirm a high level of fit. By comparing and analyzing the two prediction models, the high level of fit of the ANN model was confirmed.

• 자원리싸이클링
• /
• 제20권3호
• /
• pp.3-11
• /
• 2011

마그네슘은 최근 자동차 부품, 전자기기 케이스 등으로 사용량이 증가하고 있는데, 아직까지는 마그네슘 부품소재의 사용 수명이 다 되어 발생된 폐기물은 많지 않고, 다이캐스팅 공정 중에서 발생되는 스크랩이 대부분 재활용되며 용해과정에서 드로스(dross)와 슬러지(sludge) 및 기계 가공에서 발생하는 절삭칩 등도 일부 재활용되고 있다. 본 고에서는 최근 몇 년간의 국내 마그네슘의 수요, 생산현황 등 일반 현황을 먼저 살펴보고, 스크랩 발생량과 리싸이클링 현황 및 국내업체의 처리기술들을 조사하였다. 2010년에 국내에서 8,840톤의 마그네슘스크랩을 처리하였으며, 마그네슘 금속 재활용률은 32.5%로 추산되고, 재생마그네슘은 대부분 마그네슘 부품 다이캐스팅용으로 사용되었다.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제11권4호
• /
• pp.331-342
• /
• 2011

The transmission of tracked vehicles performs complex functions as steering, shifting, braking, etc. and the system level life time has been a key influenced by the number of sub-parts like as gear assembly, torque converter, clutches, bearings and so on. In particular, the mechanical type steering system in tracked vehicle has impact shock torques in steering shift and those kind of shock torques can effect on the durability of many sub-parts in power train system. The field failure modes of gear assembly, steering assembly and the bearings of output shaft appear as a very complex phenomenon. In this study, the actual failure, which may occur in field, of the transmission was investigated comprehensively and that the endurance test on the resulting output shaft bearing failure analysis and life assessment was performed. Life time test method used in this study, developed for the purpose of the internal usage, and under these testing techniques the impact of the each bearing damage, which used in tracked vehicle transmission left / right outputs of different structures, was analyzed.

• Journal of Mechanical Science and Technology
• /
• 제17권9호
• /
• pp.1249-1260
• /
• 2003

This present work focuses on the influence of nonlinearities associated with impact on the rocking behavior of a rigid body block subjected to a two-dimensional excitation in the horizontal and vertical directions. The nonlinearities in rocking system are found to be strongly dependent on the impact between the block and the base that abruptly reduces the kinetic energy. In this study, the rocking systems of the two types are considered : The first is an undamped rocking system model that disregards the energy dissipation during the impact and the second is a damped rocking system, which incorporates energy dissipation during the impact. The response analysis is carried out by a numerical method using a non-dimensional rocking equation in which the variations in the excitation levels are considered. Chaos responses are observed over a wide range of parameter values, and particularly in the case of large vertical displacements, the chaotic characteristics are observed in the time histories, Poincare sections, the power spectral density and the largest Lyapunov exponents of the rocking responses. Complex behavior characteristics of rocking responses are illustrated by the Poincare sections.

• Journal of Mechanical Science and Technology
• /
• 제14권4호
• /
• pp.369-379
• /
• 2000

In industrial production-distribution systems, production and purchasing rates, associated inventories, and sales are very critical for the profits of each component in the system. The objective of this study is to investigate an effective information control scheme for a production -distribution system by automatic feedback control techniques. In this work, a dynamic control scheme that has an integrated -error with state-feedback and filtering (ISFF) is proposed as a new algorithm for a dynamic controller. Generalized formulations of the dynamic control are proposed in the continuous-time and discrete-time cases. A methodology for an evaluation of ISFF controller gains using the eigen structure property is presented. When an upper-limit is imposed on the production capability by available factory space and capital equipment, supervisory control is provided to avoid integrator-windup and deterioration of system performance.

• 산업경영시스템학회지
• /
• 제22권52호
• /
• pp.117-139
• /
• 1999

This paper is concerned about the hybrid tandem configuration as the design of the automated guided vehicle system(AGVs). The hybrid tandem configuration is that the manufacturing system is divided into several non-overlapping zones, workstations of each zone are linked by network configuration including loop. That is, the manufacturing system is divided into several non-overlapping small size networks, and at most two automated guided vehicles can be available in each network. The transit point is located at proper point between adjacent networks. The parts are transported to workstations in other network through the transit points. One of the objective functions in dividing into the hybrid tandem configuration is to minimize the maximum travel time of the divided networks, and other is to minimize the total travel distance of parts moved to workstations in other networks for the next processing. The model formulation is presented, and a numerical example is shown. Also, the performances of system for the hybrid tandem, tandem and network configuration are compared through the simulation. The results of this research will contribute to the development of material handling systems in the manufacturing system. Also, it will be applied in determining the transportation area of transportation vehicles and the number and size of the transportation fleet in the transportation problem of logistics management.

• 소성∙가공
• /
• 제19권1호
• /
• pp.32-37
• /
• 2010

Hydroforming has attracted a great deal of attention in the manufacturing industries for vehicles and transportation systems. Hydroforming technology contributes to weight reduction, increased strength, improved quality and reduced tooling cost. Hydroformed automotive parts used as structure components in vehichle body frame often have to be structurally joined at some point. Therefore it is useful if the hydroformed automotive parts can be given a localized attachment flange. For a given flange shape, a parting plane for the dies is established relative to which the various surfaces of the flange shape, in cross section, have no significant reverse curvature. In this study, hydroforming process for flange forming was proposed. FE analysis to form flanged circular shape and flanged rectangular shape was preformed with Dynaform 5.5. To accomplish successful hydroforming process design, thorough investigation on proper combination of process parameters such as tool geometry and hydraulic pressure has been performed and optimized. The results show that flanged automotive parts can be successfully produced with tube hydroforming.

• 대한기계학회논문집B
• /
• 제33권4호
• /
• pp.272-277
• /
• 2009

The liquid phase LPG injection (LPLi) system (the 3rd generation technology) has been considered as one of the most promising fuel supply systems for LPG vehicles. To investigate the reaction characteristics of LPG with rubber parts in LPLi system, various rubbers were tested. The results showed that the amount of residue from the cover rubber of a fuel pump was increased about 10 times after testing. Furthermore, the amount of sulfur and nitrogen species which are considered as main sources of deposit formation in LPLi fuel injectors were also found to be higher than those in original LPG fuel. In addition, these residues made the core parts of LPLi injector such as needle and nozzle, partially worn, which eventually causes leakage in LPLi injectors.