• 센서학회지
• /
• 제9권5호
• /
• pp.373-379
• /
• 2000

본 논문에서는 차량이 자동으로 도로를 추적하는 자율주행을 실현하기 위한 선행조건으로서 자기차선의 자장으로부터 차량의 위치와 방향을 추정하기 위한 시스템을 제안한다. 자기차선에 사용되는 원통형 영구자석인 단일자기원에 자기 쌍극자 모델이 적용될 수 있음을 검증하기 위해서 자기센서를 이용하여 위치에 따른 원형 영구자석 자장의 3축 성분을 측정하고 실험 데이터를 자기 쌍극자 모델과 비교하였다. 실험 데이터를 기반으로 한 모델을 이용하여 자장의 3축 성분에 의하여 센서의 위치를 추정할 수 있음을 보인다. 단일 자기원에 검증된 자기 쌍극자 모델을 자기차선으로 확장하고, 센서의 위치와 방향에 따른 자장의 3축 성분의 실험 데이터를 획득한다. 실험 데이터의 맵핑을 이용하여 자장의 3축 성분에 따른 센서의 위치와 방향을 추정한다. 자기차선 상에서 차량의 위치와 센서를 제안된 방법에 의해 추정하고 컴퓨터 시뮬레이션을 통하여 차선추적에 적용한다.

• International Journal of Aeronautical and Space Sciences
• /
• 제18권2호
• /
• pp.378-387
• /
• 2017

The combined model following control (MFC)-decoupler system is employed for a full authority fly-by-wire utility helicopter to enhance handling qualities. The MFC, which governs the vehicle to follow the prescribed model, is widely employed for modern helicopters. However, it may not be sufficient as helicopters often suffer significant cross coupling. The coupled responses between control axes of a helicopter increase the pilot's work load and may degrade handling qualities. As the decoupler is introduced to the MFC, the combined MFC-decoupler effectively solves the coupling problems and enhances handling qualities. The proposed system is verified via the handling qualities prediction using the mathematical dynamics model. The analysis results are confirmed through the piloted simulation.

• 대한교통학회지
• /
• 제24권3호
• /
• pp.17-27
• /
• 2006

미시교통류의 한 연구분야인 차량추종이론은 1950년대에 처음으로 제시되었고 1960년대에 활발히 진행되다가 자료수집의 한계로 인해 연구가 부진하다가 위성을 이용한 차량의 위치추적 기술의 발달과 컴퓨터의 이용이 보편화되면서 다시 활기를 띠고 있다. 최근에는 GPS(global positioning systems)의 수신자료를 이용한 연구가 많이 수행되고 있다. GPS 기술이 교통에 도입되면서 차량의 위치에 대한 실시간 추적이 가능하게 되었다. 위치정보는 시간상으로 연속적일 뿐만 아니라, 여러 대의 차량의 연속주행에 대해서도 동시 측정이 가능하다. 본 연구는 현실자료를 기반으로 한 국내 교통류에 적합한 차량추종모델 파리미터를 정산하기 위하여 수집장치로서 DGPS의 활용 가능성을 타진하는 실험을 반복 수행하였고, DGPS를 활용한 분석 프로세스를 정립하고, 오차에 관한 현장조사를 수행하며, DGPS 수신자료의 활용성을 판단하여 추가조사를 통하여 제한적이긴 하나 차량추종모델의 파라미터를 정산한 후 이 값을 기존 연구결과와 비교해 보는 과정으로 구성되었다. 또한 최근 미시적 시뮬레이션의 도입이 광범위하게 이루어지고 있고. 시뮬레이션에는 차량추종모델이 적용 되어있다. 파라미터 정산의 어려움으로 인해 외국의 Default 값을 수정 없이 사용하고 있는데 국내 운전행태가 외국의 경우와 다르므로 Default값을 사용하는 것은 분석의 문제 가능성을 내포하고 있다. 본 연구에서는 현장실험을 통해 수집된 DGPS 수신자료를 이용하여 제한적이나마 PARAMICS의 차량추종모델의 파라미터를 정산하는 것으로 현실에 맞는 파라미터 정산치 가능성을 판단하였다.

• 한국철도학회논문집
• /
• 제8권6호
• /
• pp.586-591
• /
• 2005

We deal with the headway which effects on the performance of the PRT(Personal Rapid Transit) system and the system safety. The headway, time between passage of one vehicle and the next, is one of the important factors to assess the line capacity, which has a cue to solve the problem of the congestion in public transportation. To decide the headway there are many important factors, especially such as the failure vehicle deceleration rate, the following simple analytical equation can be made to assess the relation between the line speed and the minimum headway. In this paper we employ a numerical analysis method using a simple analytical equations for the evaluation of the minimum headway and show simple simulation results.

• 한국ITS학회 논문지
• /
• 제16권1호
• /
• pp.147-156
• /
• 2017

본 논문에서 군집주행 서비스를 위해 단체표준에서 정의한 서비스 요구사항을 근거로 하여 WAVE 통신시스템의 성능을 분석하였다. 통신시스템의 주요 성능 파라미터로 제시되는 패킷 에러율과 지연시간 요구조건은 군집으로 주행하는 차량의 제어와 안전을 보장하기 위해 반드시 만족되어야 한다. 실험 시나리오는 크게 군집으로 주행차량들만 존재하는 경우, 통신 반경 내에 다른 간섭차량들이 존재하는 경우 그리고 통신범위 밖에 히든차량들이 존재하는 경우로 나누어 패킷 에러율과 평균지연시간을 분석하였다. 패킷 에러율과 지연시간은 앞에서 언급한 차량들의 토폴로지와 차량 주행속도 그리고 통신반경을 고려하여 모델링 하였다. 수치적 분석 결과는 패킷의 크기, 패킷 생성 주기 그리고 전송속도에 대해 수행되었다. 결론적으로 각 표준에서 정의한 군집주행 성능요구사항에 대해 WAVE 통신 시스템이 제공할 수 있는 안정적인 패킷 성공률과 지연시간 등에 대한 범위를 제시하였다.

• 자동차안전학회지
• /
• 제9권3호
• /
• pp.31-38
• /
• 2017

For years, Q1.5 (anthropomorphic test device for 1.5 years old infant) and Q3 (anthropomorphic test device for 3 years old infant) dummy protection has been improved considerably by the effort of EuroNCAP. ISOFIX strength of vehicle structure has increased and many child occupant protection tests have made child restraint system (hereafter CRS) optimized for child safety. However, from 2016, EuroNCAP changed the dummy which is used for the child occupant protection from Q1.5/Q3 to Q6/Q10 and these were also adopted in KNCAP from 2017. Therefore, a new method is required to secure the safety for older children In this research, child dummies were tested by using adult safety systems, and the different results from each adult restraint system were compared. Finally, dummies were tested with the CRS harness belt commonly used for infants, which has yielded significant result. In this research, mid-sized sedan and small SUV were used for the test. The researchers of this paper performed sled tests to correlate between the different adult safety belt system and child injury. Following the sled test, an actual vehicle test was conducted to gather the injury data of Q-dummy with the CRS harness belts. This paper will show the advantages of applying a pre-tensioner in the second row for child protection and the necessity of CRS which has its own harness belts to improve safety for older children.

• 자동차안전학회지
• /
• 제4권2호
• /
• pp.32-36
• /
• 2012

The Automatic unmanned target object carrying system (AUTOCS) is developed for testing road vehicle radar and vision sensor. It is important for the target to reflect the realistic target characteristics when developing ASV or ADAS products. The AUTOCS is developed to move the pedestrian or motorcycle target for desired speed and position. The AUTOCS is designed that only payload target which is a manikin or a motorcycle is detected by the sensor not the AUTOCS itself. In order for the AUTOCS to have low exposure to radar, the AUTOCS is stealthy shaped to have low RCS(Radar Cross Section). For deceiving vision sensor, the AUTOCS has a specially designed pattern on outside skin which resembles the asphalt pattern. The AUTOCS has three driving modes which are remote control, path following and replay. The AUTOCS V.1 is tested to verify the radar detect characteristics, and the AUTOCS successfully demonstrated that it is not detected by a car radar. The result is presented in this paper.

• 제어로봇시스템학회논문지
• /
• 제6권8호
• /
• pp.659-665
• /
• 2000

In this paper a platoon merging control system is considered as a remotely located system with state represented by a stochastic process. in the system it is common to encounter situations where a single decision maker controls a large number of subsystems and observation and control signals are sent over a communication channel with finite capacity and significant transmission delays. Unlike a classical estimation problem where the observation is a continuous process corrupted by additive noise there is a constraint that the observation must be coded and transmitted over a digital communication channel with fintie capacity. A recursive coder-estimator sequence is a state estimation scheme based on observations transmitted with finite communication capacity constraint. in this paper we introduce a stochastic model for the lead vehicle in a platoon of vehicles in a lane considering the angle between the road surface and a horizontal plane as a stochastic process. In order to merge two platoons the lead vehicle of the following platoon is controlled by a remote control station. Using the observation transmitted over communication channel the remote control station designs the feedback controller. The simulation results show that the intervehicle spacings and the deviations from the desired intervehicle spacing are well regulated.

• Journal of Advanced Marine Engineering and Technology
• /
• 제39권2호
• /
• pp.159-165
• /
• 2015

Motion control schemes are generally classified into three categories (point stabilization, trajectory tracking, and path following). This paper deals with the problem which is associated with the initial deployment of a group of Unmanned Surface Vehicle (USVs) and corresponding point stabilization. To keep the formation of a group of USVs, it is necessary to set the relationship between each vehicle. A forcing functions such as potential fields are designed to keep the formation and a graph Laplacian is used to represent the connectivity between vehicle. In case of fixed topology of the graph representing the communication between the vehicles, the graph Laplacian is assumed constant. However the graph topologies are allowed to change as the vehicles move, and the system dynamics become discontinuous in nature because the graph Laplacian changes as time passes. To check the stability in the stage of deployment, the system is modeled with Kronecker algebra notation. Filippov's calculus of differential equations with discontinuous right hand sides is then used to formally characterize the behavior of USVs. The stability of the system is analyzed with Lyapunov's stability theory and LaSalle's invariance principle, and the validity is shown by checking the variation of state norm.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2012년도 춘계학술대회 논문집
• /
• pp.447-452
• /
• 2012

Among the various elements affecting a customer's evaluation of automobile quality, buzz, squeak and rattle (BSR) are considered to be major factors. In most vehicle manufacturers, the BSR problems are solved by find-fix method with the vehicle road test, mainly due to various excitation sources, complex generation mechanism and subjective response. The aim of this paper is to develop the integrated experimental method to systematically tackle the BSR problems in early stage of the vehicle development cycle by resolving these difficulties. To achieve this aim, the developed experimental method ought to include the following requirements: to find and fix the BSR problem for modules instead of a full vehicle in order to tackle the problem in the early stage of the vehicle development cycle; to develop the exciter system including the zig and road-input-signal reproducing algorithm; to automatically localize the source region of BSR; to develop sound quality index that can be used to assess the subjective responses to BSR. Also, the BSR sound quality indexes based on the Zwicker's sound quality parameters using a multiple regression analysis. The four sound metrics from Zwicker's sound quality parameter are computed for the signals recorded for eight BSR noise source regions localized by using the acoustic-field visualized results. Then, the jury test of BSR noise are performed for participants. On a basis of the computed sound metrics and jury test result, sound quality index is developed to represent the harsh of BSR noise. It is expected that the developed BSR detection system and sound quality indexes can be used to reduce the automotive interior BSR noise in terms of subjective levels as well as objective levels.