• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.18 no.5
• /
• pp.126-141
• /
• 2019

One of the Cooperative Intelligent Transportation System(C-ITS) priority services is collision prevention support service. Several studies have considered V2I2V communication-based collision prevention support services using Artificial Neural Networks(ANN). However, such services still show some issues due to a low penetration of C-ITS devices and large delay, particularly when loading massive traffic data into the server in the C-ITS center. This study proposes the Artificial Neural Network-based Collision Warning Service(ACWS), which allows upstream vehicle to update pre-determined weights involved in the ANN by using real-time sectional traffic information. This research evaluates the proposed service with respect to various penetration rates and delays. The evaluation result shows the performance of the ACWS increases as the penetration rate of the C-ITS devices in the vehicles increases or the delay decreases. Furthermore, it reveals a better performance is observed in more advanced ANN model-based ACWS for any given set of conditions.

• International conference on construction engineering and project management
• /
• 2022.06a
• /
• pp.937-944
• /
• 2022

Electric vehicles (EVs) have been growing to reduce energy consumption and greenhouse gas (GHG) emissions in the transportation sector. The increasing number of EVs requires adequate recharging infrastructure, and at the same time, adopts low- or zero-emission electricity production because the GHG emissions are highly dependent on primary sources of electricity production. Although previous research has studied solar photovoltaic (PV) -integrated EV charging stations, it is challenging to optimize spatial areas between where the charging stations are required and where the renewable energy sources (i.e., solar photovoltaic (PV)) are accessible. Therefore, the primary objective of this research is to support decisions of siting EV charging stations using a spatial data clustering method integrated with Geographic Information System (GIS). This research explores spatial relationships of PV power outputs (i.e., supply) and traffic flow (i.e., demand) and tests a community in the state of Indiana, USA for optimal sitting of EV charging stations. Under the assumption that EV charging stations should be placed where the potential electricity production and traffic flow are high to match supply and demand, this research identified three areas for installing EV charging stations powered by rooftop PV in the study area. The proposed strategies will drive the transition of existing energy infrastructure into decentralized power systems. This research will ultimately contribute to enhancing economic efficiency and environmental sustainability by enabling significant reductions in electricity distribution loss and GHG emissions driven by transportation energy.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.18 no.1
• /
• pp.233-262
• /
• 2024

Due to the rapid evolution of vehicular ad hoc networks (VANETs), effective communication and security are now essential components in providing secure and reliable vehicle-to-vehicle (V2V) and vehicle-to-infrastructure (V2I) communication. However, due to their dynamic nature and potential threats, VANETs need to have strong security mechanisms. This paper presents a novel approach to improve VANET security by combining the Vehicular Delay-Tolerant Network (VDTN) protocol with the Deep Reinforcement Learning (DRL) technique known as the Twin Delayed Deep Deterministic Policy Gradient (TD3) algorithm. A store-carry-forward method is used by the VDTN protocol to resolve the problems caused by inconsistent connectivity and disturbances in VANETs. The TD3 algorithm is employed for capturing and detecting Worm Hole Attack (WHA) behaviors in VANETs, thereby enhancing security measures. By combining these components, it is possible to create trustworthy and effective communication channels as well as successfully detect and stop rushing attacks inside the VANET. Extensive evaluations and simulations demonstrate the effectiveness of the proposed approach, enhancing both security and communication efficiency.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.5
• /
• pp.1229-1234
• /
• 2012

Vehicular communications have been receiving much attention in intelligent transport systems (ITS) by combining communication technology with automobile industries. In general, vehicular communications can be used for vehicle-to-vehicle (V2V) and vehicle-to-infrastructure (V2I) communication by adopting IEEE802.11p/1609 standard which is commonly known as wireless access in vehicular environments (WAVE). WAVE system transmits signal in 5.9GHz frequency band with orthogonal frequency division multiplexing (OFDM) signaling. In this paper, we consider physical layer issues in vehicular communications. We first overview the physical (PHY) layer of WAVE standard and properties of 5.9GHz signals, and then physical layer issues to provide reliable communication link are discussed.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.7 no.4
• /
• pp.748-766
• /
• 2013

In this paper, we consider an infrastructure-vehicle-vehicle (I2V2V) based Vehicle Ad-hoc Networks (VANETs), where one base station multicasts data to d vehicular users with the assistance of r vehicular users. A Distributed Luby Transform (DLT) codes based transmission scheme is proposed over lossy VANETs to reduce transmission latency. Furthermore, focusing on the degree distribution of DLT codes, a Modified Deconvolved Soliton Distribution (MDSD) is designed to further reduce the transmission latency and improve the transmission reliability. We investigate the network behavior of the transmission scheme with MDSD, called MDLT based scheme. Closed-form expressions of the transmission latency of the proposed schemes are derived. Performance simulation results show that DLT based scheme can reduce transmission latency significantly compared with traditional Automatic Repeat Request (ARQ) and Luby Transform (LT) codes based schemes. In contrast to DLT based scheme, the MDLT based scheme can further reduce transmission latency and improve FER performance substantially, when both the source-to-relay and relay-to-sink channels are erasure channels.

• Journal of Intelligence and Information Systems
• /
• v.22 no.1
• /
• pp.107-118
• /
• 2016

The advent of 5G mobile communications, which is expected in 2020, will provide many services such as Internet of Things (IoT) and vehicle-to-infra/vehicle/nomadic (V2X) communication. There are many requirements to realizing these services: reduced latency, high data rate and reliability, and real-time service. In particular, a high level of reliability and delay sensitivity with an increased data rate are very important for M2M, IoT, and Factory 4.0. Around the world, 5G standardization organizations have considered these services and grouped them to finally derive the technical requirements and service scenarios. The first scenario is broadcast services that use a high data rate for multiple cases of sporting events or emergencies. The second scenario is as support for e-Health, car reliability, etc.; the third scenario is related to VR games with delay sensitivity and real-time techniques. Recently, these groups have been forming agreements on the requirements for such scenarios and the target level. Various techniques are being studied to satisfy such requirements and are being discussed in the context of software-defined networking (SDN) as the next-generation network architecture. SDN is being used to standardize ONF and basically refers to a structure that separates signals for the control plane from the packets for the data plane. One of the best examples for low latency and high reliability is an intelligent traffic system (ITS) using V2X. Because a car passes a small cell of the 5G network very rapidly, the messages to be delivered in the event of an emergency have to be transported in a very short time. This is a typical example requiring high delay sensitivity. 5G has to support a high reliability and delay sensitivity requirements for V2X in the field of traffic control. For these reasons, V2X is a major application of critical delay. V2X (vehicle-to-infra/vehicle/nomadic) represents all types of communication methods applicable to road and vehicles. It refers to a connected or networked vehicle. V2X can be divided into three kinds of communications. First is the communication between a vehicle and infrastructure (vehicle-to-infrastructure; V2I). Second is the communication between a vehicle and another vehicle (vehicle-to-vehicle; V2V). Third is the communication between a vehicle and mobile equipment (vehicle-to-nomadic devices; V2N). This will be added in the future in various fields. Because the SDN structure is under consideration as the next-generation network architecture, the SDN architecture is significant. However, the centralized architecture of SDN can be considered as an unfavorable structure for delay-sensitive services because a centralized architecture is needed to communicate with many nodes and provide processing power. Therefore, in the case of emergency V2X communications, delay-related control functions require a tree supporting structure. For such a scenario, the architecture of the network processing the vehicle information is a major variable affecting delay. Because it is difficult to meet the desired level of delay sensitivity with a typical fully centralized SDN structure, research on the optimal size of an SDN for processing information is needed. This study examined the SDN architecture considering the V2X emergency delay requirements of a 5G network in the worst-case scenario and performed a system-level simulation on the speed of the car, radius, and cell tier to derive a range of cells for information transfer in SDN network. In the simulation, because 5G provides a sufficiently high data rate, the information for neighboring vehicle support to the car was assumed to be without errors. Furthermore, the 5G small cell was assumed to have a cell radius of 50-100 m, and the maximum speed of the vehicle was considered to be 30-200 km/h in order to examine the network architecture to minimize the delay.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.12
• /
• pp.7292-7301
• /
• 2014

With the development of IT Info-Communications technology, the vehicle with a combination of wireless-communication technology has resulted in significant research into the convergence of the component of existing traffic with information, electronics and communication technology. Intelligent Vehicle Communication is a Machine-to-Machine (M2M) concept of the Vehicle-to-Vehicle. The Vehicle-to-Infrastructure communication consists of safety and the ease of transportation. Security technologies must precede the effective Intelligent Vehicle Communication Structure, unlike the existing internet environment, where high-speed vehicle communication is with the security threats of a wireless communication environment and can receive unusual vehicle messages. In this paper, the Vehicle Identification number between the V2I and the secure message communication protocol was proposed using hash functions and a time stamp, and the validity of the vehicle was assessed. The proposed system was the performance evaluation section compared to the conventional technique at a rate VPKI aspect showed an approximate 44% reduction. The safety, including authentication, confidentiality, and privacy threats, were analyzed.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.9
• /
• pp.1416-1423
• /
• 2017

Lane detection technology is one of the most important issues on car safety and self-driving capability of autonomous vehicle. This paper introduces an accurate lane detection scheme based on OCC(Optical Camera Communication) for moving vehicles. For lane detection of moving vehicles, the streetlights and the front camera of the vehicle were used for a transmitter and a receiver, respectively. Based on the angle information of multiple streetlights in a captured image, the distance from sidewalk can be calculated using non-linear regression analysis. Simulation results show that the proposed scheme shows robust performance of accurate lane detection.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2011.04a
• /
• pp.775-776
• /
• 2011

차량이 IGW(Internet Gateway)를 통해 외부 인터넷 망과 통신하는 V2I(Vehicle-to-Infrastructure) 환경에서는 IGW가 DHCP 서버로서의 역할을 수행함으로써 차량에게 IP 주소를 부여해준다. 이 경우 차량이 새로운 IGW의 커버리지 영역으로 이동하게 되면 이 IGW로부터 새로운 IP 주소를 부여받아야 하며, 이 경우 주소 할당을 받는데 수 초의 시간이 소요되어 서비스 단절이 발생한다. 본 논문에서는 V2I 환경에서 차량에게 IP 주소를 신속하게 할당해주기 위한 주소 선할당(pre-allocation) 방법을 제안한다. 주소 선할당 방법은 차량이 후행 차량들을 위해 IGW에게 IP 주소를 미리 요청하고 이렇게 획득한 주소를 후행 차량에게 할당해줌으로써 IP 주소 획득에 소요되는 시간을 줄여준다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2011.11a
• /
• pp.539-542
• /
• 2011

VANET(Vehicular Ad-hoc Network)은 차량 간의 무선통신(Vehicule to Vehicule: V2V) 또는 차량과 RSE(Road Side Equipment)간의 무선통신(Vehicule to Infrastructure: V2I)을 이용하는 기술이다. 사용자들은 VANET을 통하여 실시간 도로 상황, 응급 상황 등을 파악할 수 있으며 도로 혼잡 등을 줄일 수 있다. 본 논문에서는 VANET 기반 서비스 중 응급상황 알림 서비스에서 발생할 수 있는 Broadcast Storm 문제를 해결하는 라우팅 알고리즘들의 작동 원리와 문제점을 분석한다.