• 한국자동차공학회논문집
• /
• 제17권5호
• /
• pp.115-126
• /
• 2009

This paper studied on the application of the crashworthiness regulations of Korean Railway Safety Law and Urban Transit Safety Law to the urban Maglev vehicle of KIMM. The Urban Maglev vehicle has to comply with the crashworthiness regulations for urban transit vehicles. The collision load cases have been simulated by using explicit finite element analysis. From the numerical results, the crashworthiness regulations of the Urban Transit Safety Law were completely satisfied, but maximum crash pulse requirement in 25 km/h crash event and no plastic deformation requirement in 10 km/h crash event in the Korean Railway Safety Law were not. If a commercial urban Maglev vehicle is developed in the near future, it is necessary that some soft buffing and energy absorbing devices are adopted in its front end so as to satisfy the crashworthiness regulations of the Korean Railway Safety Law.

• 한국가스학회지
• /
• 제14권4호
• /
• pp.56-62
• /
• 2010

본 논문은 LPG 엔진의 전자제어센서에 대한 고장사례를 분석하고 고찰한 연구이다. LP가스의 연료 분사량을 컨트롤하는 크랭크 각도센서의 기능이상은 불규칙하고 불균일한 파형형태로 나타나고 있다. 크랭크 각도센서의 노이즈에 관련된 파형은 톱니형의 불규칙한 피크형상으로 나타났고, 2.46V 정도의 노이즈 레벨이 간헐적으로 발생하고 있다. 1번 TDC센서의 내부불량으로 인해 발생한 고장사례는 엔진의 출력을 떨어뜨리고 시동을 간헐적으로 꺼지게 하는 문제점을 초래한다. 산소센서의 성능이상은 센서의 배선에서 연결이 단절되었기 때문에 발생한 것으로 차량의 울컥거리는 현상과 엔진의 부조화 현상이 나타나고 있다. 에어 크리너를 이종품으로 사용한 경우는 신기가 정상적으로 공급되지 못했기 때문에 차량의 가속불량과 엔진의 부조화 현상이 발생하는 원인으로 작용하고 있었다.

• International Journal of Automotive Technology
• /
• 제5권4호
• /
• pp.247-255
• /
• 2004

The majority of real world frontal collisions involves partial overlap (offset) collision, in which only one of the two longitudinal members is used for energy absorption. This leads to dangerous intrusions of the passenger compartment. Excessive intrusion is usually generated on the impacted side causing higher contact injury risk on the occupants compared with full frontal collision. The ideal structure needs to have extendable length when the front-end structure is not capable to absorb crash energy without violating deceleration pulse requirements. A smart structure has been proposed to meet this ideal requirement. The proposed front-end structure consists of two hydraulic cylinders integrated with the front-end longitudinal members of standard vehicles. The work carried out in this paper includes developing and analyzing mathematical models of two different cases representing vehicle-to-vehicle and vehicle-to-barrier in full and offset collisions. By numerical crash simulations, this idea has been evaluated and optimized. It is proven form numerical simulations that the smart structures bring significantly lower intrusions and decelerations. In addition, it is shown that the mathematical models are valid, flexible, and can be used in an effective way to give a quick insight of real life crashes.

• 자동차안전학회지
• /
• 제6권2호
• /
• pp.49-54
• /
• 2014

Development in vehicle industry could increase interest in children's safety recently. However the research of children safety is not being conducted as many as that of adult's. Especially the basic study for the vehicle crash on-board children was not much. This study focused on the effect of seatbelt anchorage points to evaluate children's safety in frontal crash. The current regulation of the seatbelt anchorage points is suitable for ranged from female 5% to male 95%. The assessment of children's safety at buckle up of no used CRS(child restraint system) was performed using frontal sled tests. The frontal crash pulse in sled tests was designed to the average of about 30 KNCAP frontal crash pulses. To reduce number of experiments, DOE is used. The Q6 child dummy and standard seat in UN R 129 were used. According to the analysis of test results, children's safety has been influenced by the points of seatbelt anchorage.

• Journal of Power Electronics
• /
• 제16권1호
• /
• pp.111-120
• /
• 2016

Generally, a single phase H-bridge converter feeding a single primary track is employed in conventional inductive power transfer systems. However, these systems may not be suitable for some high power applications due to the constraints of the semiconductor switches and the cost. To resolve this problem, a novel dual coupled primary tracks IPT system consisting of two high frequency resonant inverters feeding the tracks is presented in this paper. The primary tracks are wound around an E-shape ferrite core in parallel which enhances the magnetic flux around the tracks. The mutual inductance of the coupled tracks is utilized to achieve adjustable power sharing between the inverters by configuring the additional resonant capacitors. The total transfer power can be continuously regulated by altering the pulse width of the inverters' output voltage with the phase shift control approach. In addition, the system's efficiency and the control strategy are provided to analyze the characteristic of the proposed IPT system. An experimental setup with total power of 1.4kW is employed to verify the proposed system under power ratios of 1:1 and 1:2 with a transfer efficiency up to 88.7%. The results verify the performance of the proposed system.

• Transactions on Electrical and Electronic Materials
• /
• 제17권2호
• /
• pp.57-68
• /
• 2016

In this study, we present the modern hybrid system based power generation for electric vehicle applications. We describe the hybrid structure of modified current source based DC - DC converters used to extract the maximum power from Photovoltaic (PV) and Fuel Cell system. Due to reduced dc-link capacitor requirement and higher reliability, the current source inverters (CSI) better compared to the voltage source based inverter. The novel control strategy includes Distributed Maximum Power Point Tracking (DMPPT) for photovoltaic (PV) and fuel cell power generation system. The proposed DC - DC converters have been analyzed in both buck and boost mode of operation under duty cycle 0.5>d, 0.5<d<1 and 0.5<d for capable electric vehicle applications. The proposed topology benefits include one common DC-AC inverter that interposes the generated power to supply the charge for the sharing of load in a system of hybrid supply with photovoltaic panels and fuel cell PEM. An improved control of Direct Torque and Flux Control (DTFC) based induction motor fed by current source converters for electric vehicle.In order to achieve better performance in terms of speed, power and miles per gallon for the expert, to accepting high regenerative braking current as well as persistent high dynamics driving performance is required. A simulation model for the hybrid power generation system based electric vehicle has been developed by using MATLAB/Simulink. The Direct Torque and Flux Control (DTFC) is planned using Xilinx ISE software tool in addition to a Modelsim 6.3 software tool that is used for simulation purposes. The FPGA based pulse generation is used to control the induction motor for electric vehicle applications. FPGA has been implemented, in order to verify the minimal error between the simulation results of MATLAB/Simulink and experimental results.

• 한국추진공학회지
• /
• 제18권1호
• /
• pp.42-49
• /
• 2014

설계성능이 검증된 70 N급 하이드라진 추력기에 대한 성능평가 시험이 수행되었다. 각각의 개발모델 추력기는 추력실 직경 변화에 따라 펄스모드로 연소시험이 수행되었으며, 비추력, 임펄스 비트 및 특성속도 등의 성능변수로 평가되었다. 추력실 직경의 증가와 감소에 따라 비추력과 특성속도가 감소하였으며, 성능평가 결과 표준모델의 성능특성이 가장 우수한 것으로 확인되었다.

• 대한의생명과학회지
• /
• 제15권4호
• /
• pp.265-272
• /
• 2009

Recently, mesenchymal stem cells (MSCs) began to be utilized as a vehicle for ex vivo gene therapy based on their plasticity. Effective and safe transfection of therapeutic genes is a critical step for genetic modification of MSCs. Therefore, optimization of in vitro gene delivery into MSCs is essential to provide genetically modified stem cells. In this study, various cationic liposomes, O,O'-dimyristyl-N-lysyl aspartate (DMKD), DMKD/cholesterol, O,O'-dimyristyl-N-lysyl glutamate (DMKE), DMKE/cholesterol, and N-[1-(2,3-dioleoyloxy)]-N,N,N-trimethylammonium propane methyl sulfate (DOTAP)/cholesterol, were mixed with plasmid DNA encoding luciferase (pAAV-CMV-Luc) at varied ratios, and then used for transfection to MSCs under varied conditions. The MSCs were also transfected by electroporation under varied conditions, such as voltage, pulse length, and pulse interval. According to the experimental results, electroporation-mediated transfection was more efficient than cationic liposome-mediated transfection. The best MSC transfection was induced by electroporation 3 times pulses for 2 ms at 200 V with 10 seconds of a pulse interval.

• Structural Engineering and Mechanics
• /
• 제75권6호
• /
• pp.713-722
• /
• 2020

This article aims to illustrate the damped dynamic responses of layered functionally graded (FG) thick 2D beam under dynamic pulse sinusoidal load by using finite element method, for the first time. To investigate the response of thick beam accurately, two-dimensional plane stress problem is assumed to describe the constitutive behavior of thick beam structure. The material is distributed gradually through the thickness of each layer by generalized power law function. The Kelvin-Voigt viscoelastic constitutive model is exploited to include the material internal damping effect. The governing equations are obtained by using Lagrange's equations and solved by using finite element method with twelve -node 2D plane element. The dynamic equation of motion is solved numerically by Newmark implicit time integration procedure. Numerical studies are presented to illustrate stacking sequence and material gradation index on the displacement-time response of cantilever beam structure. It is found that, the number of waves increases by increasing the graduation distribution parameter. The presented mathematical model is useful in analysis and design of nuclear, marine, vehicle and aerospace structures those manufactured from functionally graded materials (FGM).

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.194-199
• /
• 2003

The traction drive system for the urban transit Rubber-tire system is described in this paper. To control the magnitude and frequency of the output voltage of induction motor transiently, the vector control strategy is generally used. But in case of the traction drive system for the railway vehicle, it is difficult to use the vector control caused by the one-pulse mode in the high speed region. Therefore, this paper proposes the control strategy combined the vector control in the low speed region and the slip frequency control in the high speed region. And also, the overmodulation PWM method is discussed to make the change to the one-pulse mode softly. The performance of the Proposed traction drive system is verified by the MATLAB simulation results.