• Corrosion Science and Technology
• /
• v.21 no.5
• /
• pp.348-359
• /
• 2022

Interest in electric vehicle is on the rise due to global eco-friendly policies. To improve the efficiency of electric vehicles, it is essential to reduce weights of components. Since electric vehicles have various electronic equipment, the research on stray current corrosion is required. In this research, a galvanostatic corrosion experiment was performed on 6061-T6 Al alloy for electric vehicle battery housing using chloride concentration and applied current density as variables in a solution simulating an acid rain environment. As a result of the experiment, when chloride concentration and applied current density were increased, corrosion damage became larger. In particular, pitting damage was dominant at an applied current density of 0.1 mA/cm². Pitting damage over the entire surface was found at a current density of 1.0 mA/cm². In conclusion, chloride concentration had a relatively large effect on localized corrosion. The applied current density had a great effect on uniform corrosion. However, in the case of applied current density, localized corrosion was also greatly affected by interaction with chloride.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.3 no.3
• /
• pp.66-78
• /
• 1995

In this paper, we address vehicle modeling and dynamic analysis of four wheel steering systems (4WS). 4WS is one of the devices used for the improvement of vehicle maneuverability and stability. All research done here is based on a production vehicle from a manufacturer. To study actual system response, a three dimensional, full vehicle model was created. In past research of this type, simple, two dimensional, bicycle vehicle models were typically used. First, we modelled and performed a dynamic analysis on a conventional two wheel steering(2WS) vehicle. The modeling and analysis for this model and subsequent 4WS vehicles were performed using ADAMS(Automatic Dynamic Analysis of Mechanical Systems) software. After the original vehicle model was verified with actual experiment results, the rear steering mechanism for the 4WS vehicle was modelled and the rear suspension was changed to McPherson-type forming a four wheel independent suspension system. Three different 4WS systems were analyzed. The first system applied a mechanical linkage between the front and rear steering mechanisms. The second and third systems used, simple control logic based on the speed and yaw rate of the vehicle. 4WS vehicle proved dynamic results through double lane change test.

• Korean Journal of Culture and Social Issue
• /
• v.11 no.2
• /
• pp.31-46
• /
• 2005

The purpose of the present study was to investigate the effects of in-vehicle noise types and levels of intensity on drivers' driving speed estimation. Noise generated from the vehicle engine and musical sound sampled from the Korean pop were employed as the types of in-vehicle noise and their levels of intensity were systematically manipulated. In experiment 1 where the effect of the engine noise levels on speed estimation was observed, drivers showed the tendencies of driving faster than the targets speeds under lower noise intensity condition whereas driving slower under higher noise intensity condition. In experiment 2 where both musical sample and the engine noise were provided, drivers' subjective speed estimation was affected by the engine noise as revealed experiment 1, but not by musical sample. When the data from the both experiments were combined and analyzed, an interacting effect of engine noise levels and music sample levels was found: if the intensity of music sample was enough to overwhelm the engine noise, the drivers drove faster than lower engine noise level condition in the experiment 1. This result indicates that although the music sample is not the direct auditory cue of speed estimation as observed in the experiment 2, intense level of music sample can affect drivers' speed estimation when it is coupled with the lower engine noise level.

• Journal of the Korean Geotechnical Society
• /
• v.34 no.6
• /
• pp.49-59
• /
• 2018

When a tracked vehicle travels off-road, shearing action and ground sinkage occur on the soil-track interface and severely affect tractive performance of the tracked vehicle. Especially, the ground sinkage, which is induced by vehicle's weight (hereinafter referred to as static sinkage) and longitudinal forces in the direction of travel producing slip (hereinafter referred to as slip sinkage), develops soil resistance, directly restricting the tractive performance of an off-road tracked vehicle. Thus, to assess the tractive performance of an off-road tracked vehicle, it is imperative to take both of static sinkage and slip sinkage into consideration. In this research, a series of model track experiments was conducted to investigate the slip sinkage which has not been clarified. Experiment results showed that the slip sinkage increased with increasing the slip ratio, but the increasing rate gradually decreased. Also, the slip sinkage was found to increase as relative density of soil decreased and imposed vertical load increased. From the experiment results, the normalized slip sinkage defined as slip sinkage to static sinkage calculated in the identical condition was investigated, and an empirical equation for the slip sinkage was developed in terms of slip ratio, which allows vehicle operators to predict the slip sinkage in a given soil and operating conditions.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.25 no.3
• /
• pp.374-379
• /
• 2017

In vehicle to pedestrian accidents, cracks occur in the vehicle laminated glass due to impact of a pedestrian's head. In this study, FMH(Free Motion Headform) was used to experiment on and analyze the crack patterns on a vehicle laminated glass that collides with an adult headform at speeds of 20 km/h, 30 km/h, and 40 km/h, respectively. Applying the acquired experimental data and material property of the vehicle laminated glass to the structural analysis program LS-Dyna, we could develop the FE model of vehicle laminated glass similar to real vehicle laminated glass. We could estimate the head impact velocity and pedestrian's vehicle impact velocity using the Madymo program.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2006.05a
• /
• pp.1170-1177
• /
• 2006

We apply VRP(Vehicle Routing Problem) to sludge collection system in this study. Sewage stores of villages are located in each village around a multipurpose dam. Sludge which is produced in sewage store of village is transported from the sewage store of village to the sewage treatment plants by the special purpose vehicle such as the tank lorry. In this paper, we propose sludge collection strategies which allocate each sewage store of village to sewage treatment plants and decide the schedule of sludge collection in order to collect sludge efficiently. The strategies aim to decrease transportation cost with deciding proposed vehicle routing and scheduling the sludge collection. When we decide route of vehicles, we consider the collection time in sewage store of village, distance between sewage store of villages and vehicle information as average velocity of vehicle, operation time of vehicle driver. We also develop the SCMS(Sludge Collection Management System) based on windows system with real data which is used in certain circumstance. And we experiment to figure out vehicle route and transportation cost throughout changing input data.

• Journal of Korea Multimedia Society
• /
• v.15 no.8
• /
• pp.996-1003
• /
• 2012

We present a nearby vehicle detection method in the adjacent lane using in-vehicle front view camera. Nearby vehicles in adjacent lanes show various appearances according to their relative positions to the host vehicle. Therefore, most conventional methods use motion information for detecting nearby vehicles in adjacent lanes. However, these methods can only detect overtaking vehicles which have faster speed than the host vehicle. To solve this problem, we use the feature of regions where nearby vehicle can appear. Consequently, our method cannot only detect nearby overtaking vehicles but also stationary and same speed vehicles in adjacent lanes. In our experiment, we validated our method through various whether, road conditions and real-time implementation.

• Journal of computational fluids engineering
• /
• v.19 no.2
• /
• pp.86-92
• /
• 2014

In this paper, prediction of separation trajectory for Two-stage-To-Orbit space launch vehicle has been numerically simulated by using an aerodynamic database based on steady state analysis. Aerodynamic database were obtained for matrix of longitudinal and vertical positions. The steady flow simulations around the launch vehicle have been made by using a 3-D RANS flow solver based on unstructured meshes. For this purpose, a vertex-centered finite-volume method was adopted to discretize inviscid and viscous fluxes. Roe's finite difference splitting was utilized to discretize the inviscid fluxes, and the viscous fluxes were computed based on central differencing. To validate this flow solver, calculations were made for the wind-tunnel experiment model of the LGBB TSTO vehicle configuration on steady state conditions. Aerodynamic database was constructed by using flow simulations based on test matrix from the wind-tunnel experiment. ANN(Artificial Neural Network) was applied to construct interpolation function among aerodynamic variables. Separation trajectory for TSTO launch vehicle was predicted from 6-DOF equation of motion based on the interpolated function. The result of present separation trajectory calculation was compared with the trajectory using experimental database. The predicted results for the separation trajectory shows fair agreement with reference[4] solution.

• The Korea Journal of Herbology
• /
• v.30 no.2
• /
• pp.19-24
• /
• 2015

Objectives : The experiment was performed to investigate promotive effects of haeae-tang (HET) extract, a traditional Korean medicinal recipe, on hair growth, protein and gene expression in hair-removed C57BL/6. Methods : In experiment, animals were divided into 3 groups including normal (vehicle), HET ethanol extract and 5% minoxidil-treated groups (Minoxidil, positive control). The vehicle or testing samples were daily treated with 0.2ml per on hair-shaved dorsal skin of C57BL/6mice for 15 days. Effects of testing samples on hair growth was monitored through phototrichogram analysis by folliscope on the initial, $5^{th}$, $10^{th}$, $15^{th}$ day, respectively. Also, gene and protein expressions of vascular endothelial growth factor (VEGF) and Insulin like growth factor-1 (IGF-1), relevant to hair growth, were examined. Results : Hair density and hair thickness of Minoxidil treated-group was significantly increased compared to that of vehicle application on the $15^{th}$day, respectively. Dorsal hair density of HET treated-group was significantly increased compared to that of vehicle application on the $15^{th}$day. In addition, the Minoxidil group significantly increased the expression of cutaneous IGF-1 protein and mRNA compared to that of the vehicle-applied group on the $15^{th}$ day. And HET-treated group significantly increased the expression of dorsal VEGF protein compared to that of the vehicle-applied group on the $15^{th}$ day. Conclusions : These results suggest that this Korean medicinal recipe, HET has promoting activity on hair growth in an Alopecia animal model thus it can be used as a material of agent or products for improvement or prevention of alopecia.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2011.06a
• /
• pp.1543-1544
• /
• 2011