• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.1347-1350
• /
• 2005

Recently, as the road capacity reaches a limit and environmental problems become serious, there exists a gradual increasing need for railway vehicles that are environment-friendly, punctual, reliable and safe. Accordingly, in addition to conventional railroad vehicles, lots of vehicles are being newly developed. Using the developed installed measurement system, the performance characteristics of railway vehicle could be monitored precisely. After recording the input real time data of each signal from railway vehicle to the network line, we could acquire the needed information through post processing program. We could verify the running performances of railway vehicle using this system. As a result, many latent defects have been found and corrected in the prototype train. The measurement systems have contributed to dramatic reduction of the developing period.

• 자동차안전학회지
• /
• 제10권4호
• /
• pp.13-24
• /
• 2018

According to DEKRA (a Germany Certification and Inspection Agency)'s accident rate analysis by vehicle defect factor, as a result of analysis of the causes of accidents by flaws, it was found that braking devices accounted for 41%. Defects in the braking system are closely related to the accident, so it is very important to find faulty brking systems to ensure safety. The EU and USA uses ISO brake tester and the Korea is brake teater is first introduse in Japan for vehicle inspection and maintanance. KOTSA introduce the ISO brake tester in order to promote the advanced standardization of the inspection equipment and inspection tecnology, and examined the detection characteristics and applied it to the improvement direction of the brake tester to secure the driving safety.

• 한국건설순환자원학회논문집
• /
• 제8권3호
• /
• pp.372-378
• /
• 2020

본 연구에서는 콘크리트 하수관로의 결함부를 보수하기 위한 자주차의 개발 및 성능평가에 관한 연구를 수행하였다. 비굴착 방식인 자주차를 활용한 하수관로 보수를 위하여 구동 시스템, 보수 유닛 설계 및 보수재료 압송에 관한 성능을 고려하여 자주차를 개발하였다. 개발된 자주차의 성능평가를 하기 위하여 직경 500mm 콘크리트 하수관로에 결함부를 모사하여 보수실험을 수행하였다. 이후, 보수가 완료된 하수관로를 양쪽 끝단과 결함부에 플러그를 삽입하여 고정하고, 물을 주입하여 보수부위에서 누수 여부를 통한 수밀성능을 평가하였다. 누수량은 0.07L/㎡으로 허용 누수량 0.2L/㎡ 이하의 값을 나타내며 우수한 수밀성능을 나타내었다. 따라서 본 연구에서 개발한 자주차는 우수한 보수성능을 나타내는 것으로 판단된다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2004년도 학술대회지
• /
• pp.729-734
• /
• 2004

The e-Logistics means the virtual business activity and service architecture among the logistics companies based on the Internet technology. The management of vehicles' location in most conventional vehicle tracking system has some critical defects when it deals with data which are continuously changed. It means the conventional vehicle tracking system based on the conventional database is unable eventually to cope with the environment that should manage the frequently changed location of vehicles. The important things in the evaluation of the vehicle tracking system is to determine the threshold of cost of database ,update period and communication period between vehicles and the system. In other words, the difference between the reallocation of vehicle and the data in database can evaluate the overall performance of vehicle tracking systems. Most of the previous works considers only the information that is valid at the current time, and is hard to manage efficiently the past and future information. To overcome this problem, the efforts on moving objects management system(MOMS) and uncertainty processing have been started from a few years ago. In this paper, we propose an uncertainty processing model and system implementation of moving object that tracks the location of the vehicles. We adopted both linear-interpolation method and trigonometric function to chase up the location of vehicles for the past time as well as future time, respectively. We also explain the comprehensive examples of MOMS and uncertainty processing in parcel application that is one of major application of e-Logistics domain.

• Archives of Reconstructive Microsurgery
• /
• 제3권1호
• /
• pp.90-96
• /
• 1994

1. 교통사고 등으로 인한 외상성 골노출이 8례로 가장 많았으며, 원인으로서는 교통사고가 7례이었고 1례는 기계사고 이었으며, 부위 별로는 하지 경골이 7례, 종골이 1례이었다. 2. 2례의 만성 골수염에서는 유리조직 이식술과 함께 골소파술 및 정주 항생제 요법을 병행하였다. 3. 총 10례중 9례에서 완전 생존하여 90%의 성공률을 보였다. 4. 공여부위에 대한 합병증은 소량의 혈종을 형성한 1례에서 2차 탐구술과 흡인술을 시행하였으며 합병증없이 치유되었다.

• 한국생산제조학회지
• /
• 제23권4호
• /
• pp.337-344
• /
• 2014

While implicit integration methods such as Newton's method have excellent stability for the analysis of stiff and constrained mechanical systems, they have the drawback that the evaluation and LU-factorization of the system Jacobian matrix required at every time step are time-consuming. This paper proposes a Jacobian update-free Newton's method in order to overcome these defects. Because the motions of all bodies in a vehicle model are limited with respect to the chassis body, the equations are formulated with respect to the moving chassis-body reference frame instead of the fixed inertial reference frame. This makes the system Jacobian remain nearly constant, and thus allows the Newton's method to be free from the Jacobian update. Consequently, the proposed method significantly decreases the computational cost of the vehicle dynamic simulation. This paper provides detailed generalized formulation procedures for the equations of motion, constraint equations, and generalized forces of the proposed method.

• 문화기술의 융합
• /
• 제10권3호
• /
• pp.845-849
• /
• 2024

현재 도시철도 레일의 노후화로 인한 레일표면결함이 증가하고 있으나 국가에서 제정된 궤도성능평가에 관한 세부지침에서 레일표면손상을 기술자의 육안, 간단한 측정 도구로 점검을 수행하는 실정이다. 주기적인 선로순회작업 및 육안점검을 통해 레일표면의 결함을 발견하는 것은 매우 중요하다. 그러나 점검자의 주관적 판단에 의해 레일표면의 결함의 경중을 평가하는 것은 레일 내부의 손상을 예측하기에 상당한 제약이 따른다. 본 연구에서는 레일표면손상에 따른 레일내부 균열특성에 관한 연구로서 현장측정에서는 레일표면 손상개소를 선정하여 가속구간 및 제동구간의 노후레일 시료를 채취하여 레일표면손상 상태를 평가하고자 전자주사현미경(SEM)을 이용하여 균열특성을 분석하였다. 분석결과, 주행 중인 열차로 인해 발생하는 균열 메커니즘과 레일표면방향으로 올라오는 각도로 균열이 발생하는 가속구간의 균열특성을 실험적으로 입증하였다.

• 한국해양공학회지
• /
• 제24권4호
• /
• pp.38-46
• /
• 2010

The wall thinning phenomenon of pipes was simulated as metal loss due to erosion and corrosion. Such wall thinning defects in the pipes of power plants are a very important safety consideration. In this study, we analyzed wall thinning defects that occurred by weld bead of weld zone of boost pump recirculation pipe. From the results of the analysis of pipe failures, numerical analysis was performed by Fluent v6.3.26 using the standard k-$\varepsilon$ model of the weld bead shape, such as an elliptical or a spherical shape, on the inner wall of the pipe. Using the results obtained, we showed the overlap effect by cavitations corrosion and erosion-corrosion at the bottom of the wall-thinning defect.

• 한국도로학회논문집
• /
• 제15권5호
• /
• pp.157-166
• /
• 2013

PURPOSES : This study is to analyze expected effect of a accident decrease when motorcycle safety inspection is introduced. METHODS : Based on the literature review of effect of 4-wheel vehicle inspection, probability of occurring accidents among defective motorcycles are calculated by using the number of estimated defective motorcycles and accidents resulting from defects of motorcycles. Then, the number of decreased accidents which is resulting from eliminating defects of motorcycles by safety inspection is estimated by using probability of occurring accidents among defective motorcycles. RESULTS : If the ratio of eliminating defects of motorcycles is 95% after motorcycle safety inspection, the effects of accident decrease of motorcycle safety inspection are analyzed from 2005 to 2008. As a result, 46,292 defective motorcycles are repaired and 1,376 accidents are prevented when the probability of occurring accidents among defective motorcycles is 2.97%. CONCLUSIONS : This study suggests the expected effect of motorcycle safety inspection is that the inspection can prevent 1,376 motorcycle accidents. However, the number of preventing motorcycle accidents are small, compared with the total number of motorcycle accidents because there are limitations to investigate the causes of defective motorcycle accidents. A more precise analysis of the expected effect of motorcycle inspection is possible when a systematic investigation of the causes of the accidents is implemented.

• 한국전자통신학회논문지
• /
• 제14권3호
• /
• pp.513-518
• /
• 2019

와전류를 이용한 비파괴검사장비가 자동차 변속기 부품의 결함유무를 판단하기 위해 개발되었다. 본 탐상기에서는 부품에서 발생하는 결함을 패턴별로 검사하기 위한 결함 마스터 샘플을 만들고, 결함의 형태별로 탐상 가능한 와전류 탐상기를 제작하여 시험을 하였다. 또한 실제 결함이 있는 불량품을 대상으로 결함발생 원인 및 결함발생 형태를 조사하며, 탐상시험을 통해 결과를 비교 분석하였다. 본 연구에서 개발된 와전류 탐상기는 비전문가도 모니터에 나타난 탐상기 결과로부터 부품의 결함여부를 쉽게 판단할 수 있도록 시스템 소프트웨어를 개발하였다.