• Journal of Korea Society of Digital Industry and Information Management
• /
• v.14 no.1
• /
• pp.15-25
• /
• 2018

ISO/IEC 15118 is a standard for communications and services for electric vehicle charging infrastructure. Although this standard deals only with data communication between an electric vehicle and a charge station, communication with the outside is essential for establishing an authentication system for vehicle certification and V2G service for electric power transmission. In this study, it was designed to verify the information of electric car charging infrastructure in electric power system through communication link between ISO/IEC 15118 electric vehicle model and IEC 61850 standard MMS protocol. This is demonstrated in the field so that the electric vehicle communication data is linked with the micro grid management system. This could be used as an element technology in other distributed power sources as well as electric cars in the future.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.9 s.351
• /
• pp.6-13
• /
• 2006

In this paper, we studied vehicle to vehicle (VTV) communication system using DSRC of 5.8 GHz bands. Nowadays, in the road traffic system is going intelligent and advancing, communication between driving vehicle is very important technology for ITS. We can contrive smoothness and safety traffic flowing by exchanging information about velocity, location, braking and driving condition of nearby vehicles. Therefore, we developed and verified the system which required for the communication among vehicles using DSRC technology of 5.8 GHz band hasa 1 Mbps data rate in the high mobility condition. For this, we developed DSRC modem, data link layer and logic link layer to make it possible that communication between vehicles of perfectly operation, and developed application service program for VTV communication. We performed to communication test in the general road and ascent road. In case of the general mad, obtained VTV communication results are more than number of 17 with in 300 m LOS coverage, and total communication time are $2.34{\sim]18.7$ msec that considered maximum 8-transaction. We blow that obtained results can be used VTV communication or the in areas form the feasibility road test as a function or various conditions. In the future, this system is very useful of advanced safety vehicle (ASV) and super smart vehicle system (SSVS) and so on.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.2
• /
• pp.51-55
• /
• 2015

In this paper, we proposed scheme that obtain diversity gain in the cooperative communication to mitigate, applied to the effects of fading in the vehicle communication. Relay used bus that can available in the city environment. In addition, we applied the double rayleigh fading environment so that can applied in real-environments. Therefore, proposed scheme through this paper applied to vehicle communication, user can acquire a high quality service and the operation efficiency of the network is improved. Finally, performance of the proposed protocol is analyzed in terms of bit error rate.

• 제어로봇시스템학회:학술대회논문집
• /
• 2002.10a
• /
• pp.41.6-41
• /
• 2002

In this paper, we present a remote control strategy for vehicles moving in an intelligent Vehicle Highway System(IVHS). We study a method for optimal off-line scheduling of a limited communication channel that is used for lead vehicle control in a platoon. The deviated distance from the desired trajectory is used for defining a cost functional that measures the performance of the system with communication constraints in relation to the desired system without communication constraints. The optimal communication sequence is obtained by simulations.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.11
• /
• pp.2527-2534
• /
• 2010

The vehicle consists of a variety of in-vehicle networks and each network uses its own protocol. It makes the communication between the heterogeneous networks and the extension of a new vehicle network difficult. It is also difficult to provide a variety of services between the networks. Therefore, a method for communication and extension between in-vehicle networks is essentially required. In this paper, a XML schema which focuses on the communication and extension of the networks is proposed. It is based on a standard protocol. We also implement the XML, builder and parser tool. The implementation shows that the proposed schema is in the capacities of communication and extension. It also shows that each message from the existing vehicle networks is matched well with the corresponding intelligent service.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.64 no.10
• /
• pp.1448-1453
• /
• 2015

In this paper, we propose an alternative method of communication to improve the reliability of in-vehicle networks by jointly using wireless communication networks. Wired Communication networks have been used in vehicles for the monitoring and the control of vehicle motion, however, the disconnection of wires or hardware fault of networks may cause a critical problem in vehicles. If the network manager detects a disconnection or faults in wired in-vehicle network like the Controller Area Network(CAN), it can redirect the communication path from the wired to the wireless communication like the Zigbee network. To show the validity and the effectiveness of the proposed in-vehicle network architecture, we implement the Electronic Stability Control(ESC) system as ECU-In-the-Loop Simulation(EILS) and verify that the control performance can be kept well even if some hardware faults like disconnection of wires occur.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.12 no.6
• /
• pp.111-116
• /
• 2012

Vehicular communication is one of main convergence technologies which combines information and communication technology (ICT) with vehicle and road industries. In general, vehicular communication adopts IEEE 802.11p standard which is commonly referred as wireless access in vehicular environments (WAVE). In this paper, we investigate a multi-hop communication scheme for IEEE 802.11p based communication systems which support both vehicle-to-infrastructure (V2I) and vehicle-to-vehicle (V2V) communications. First, we briefly overview the performance of IEEE 802.11p based communication systems. Then, a multi-hop communication scheme is introduced for both broadcast and unicast. The performance of proposed scheme is presented via experimental measurements.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.12 no.6
• /
• pp.117-125
• /
• 2012

Recently, there has been a fast paradigm shift in the automotive market from the traditional machine-oriented technology into the technology for vehicle informatics and electronics. In particular, telematics market is accelerating the development of technologies for vehicle informatics through the close cooperation between the vehicle makers and mobile communication companies. However, there may be the degradation of the quality of service by the interference since the telematics uses the wireless communication infrastructure for the base station-to-vehicle communication and the vehicle-to-vehicle communication. This paper presents an analysis device to easily analyze the interference by the wireless communication in the vehicle wireless network environment. Using the analysis results by the presented device, this paper shows that the link quality can be improved through the simulation and the experiment in real environment both.

• Proceedings of the IEEK Conference
• /
• 2002.06a
• /
• pp.157-160
• /
• 2002

For a company operating lots of vehicle, such as taxi companies or delivery company, a system telling the position of each vehicle is essential. Conventional methods are based on personal communication between a operator in head-office and driver at the car. Since driver cannot respond to the communication while he drives or when lie is out of car. the communication often fails. So, a system identifying and reporting the vehicle position offers groat help to those kind of company.

• Journal of Auto-vehicle Safety Association
• /
• v.14 no.2
• /
• pp.14-19
• /
• 2022

This paper presents motion planning algorithm that yields to intervening side lane vehicles in a congested traffic flow based on vehicle to vehicle (V2V) communication. Autonomous driving in dense traffic situation requires advanced driving performance in terms of vehicle interaction and risk mitigation. One of the most important functions necessary for congested traffic autonomous driving is to predict the lane change intention of the side lane target vehicle. However, implementing this function by using only environmental sensors has limitations. In this study, V2V communication is used to overcome the limitations and determine the intention of cut-in vehicles. Lane change intention of the intervening side lane vehicle is inferred by its longitudinal speed, steering angle, and turn signal light information received by the on-board-unit (OBU). Once the yield decision is made, the subject vehicle decelerates to generate sufficient clearance for the target vehicle to enter. Validation of the algorithm was conducted with actual autonomous test vehicles.