• Transactions of the Korean Society of Automotive Engineers
• /
• v.24 no.2
• /
• pp.191-197
• /
• 2016

RCAR low speed impact test estimates repair cost of the impacted vehicle. In this study, for a mid-size vehicle front body model, structural performance for RCAR low speed impact were analyzed with changing the bumper stay shape and size. First, for improving the impact load transfer mechanism to side member the stay rear section shape at connecting area with side member was modified and the stay outer was redesigned to be normal to the barrier. Next, the investigation on stay thickness effect was carried out and the performances of several models with different forming shape were compared. The final design showed 13mm decrease in the maximum barrier intrusion distance and greatly reduced side member deformation. Additional analyses explained the validity of the final design.

• Proceedings of the KSR Conference
• /
• 2006.11b
• /
• pp.288-293
• /
• 2006

In this work, the characteristics and the improving method of train performance of Korean rubber-tired AGT system(K-AGT) and Urban MAGLEV system are evaluated by using Train Performance Simulation(TPS). The train performance characteristics of K-AGT were analysed according to the change of maximum running speed and those of Urban MAGLEV were evaluated according to a vehicle weight variation. In the result of simulation in virtual line, the scheduled speed and the running time of K-AGT system have no difference with Urban MAGLEV system if the maximum running speed is equal. But the energy consumption of Urban MAGLEV system is more than that of K-AGT system. The analyses showed that in case of a 20 percent vehicle weight reduction of Urban MAGLEV system, the energy consumption per person is similar with the K-AGT system. The Urban MAGLEV system is more efficient in long travel distance condition than in short running distance condition in the aspect of train performance.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.1
• /
• pp.89-93
• /
• 2006

This paper is primarily focused on the safe navigation between overtaking and overtaken vessels in restricted waterways under the external forces, such as wind and current. The maneuvering simulation between two ships was conducted to find an appropriate safe speed and distance, which is required to avoid collision. From the viewpoint of marine safety, a greater transverse distance between two ships is more needed for the smaller vessel. Regardless of external forces, the smaller vessel will get a greater effect of hydrodynamic forces than the bigger one. In the case of close navigation between ships under the forces of wind and current, the vessel moving at a lower speed is potentially hazardous because the rudder force of the lower speed vessel is not sufficient for steady-state course-keeping, compared to that of the higher speed vessel.

• Journal of Auto-vehicle Safety Association
• /
• v.4 no.1
• /
• pp.27-32
• /
• 2012

Recently, in order to reduce traffic accident related fatalities, increasing number of studies are conducted regarding the vehicle safety enhancement devices. But very few studies about test procedures and requirements for vehicle safety systems are being carried out. Since BSD, as one of the most important safety features, is installed on a new vehicle, its performance test method has to be evaluated. Independent factors irrelevant to the device types including collision position, vehicle speed and closing speed are used to calculate test distance away from the current vehicle. Effect of roadway geometry as radius of curvature is introduced to propose possible misjudgement of following vehicle as adjacent one. The study results would be utilized to enhance the test procedure of BSD performance.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.14 no.5
• /
• pp.17-24
• /
• 2006

Anti-lock brake system(ABS) are designed to prevent wheel lock on all wheels of the vehicle by sensing wheel angular speed, processing the speed sensor signals in suitable digital electronic control circuits and comanding electrohydraulic actuators to control brake pressure. This study considers a control of ABS using wheel circumferential acceleration thresholds which avoids dangerous wheel locking due to excessive brake pressure during the vehicle braking and discusses the 3-channels, 3-sensors ABS system that employs "independent control" technique for the front wheels and "select low" technique for the rear wheels. The validities of the ABS such as vehicle stability, steerability and stopping distance during braking are assured through the vehicle tests on uniform asphalt straight roads.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.8 no.3
• /
• pp.433-438
• /
• 2013

Interference reduction method of vehicle collision avoidance sensor which is used for the low speed electric vehicle has been investigated. Various methods were attempted for the vehicle collision avoidance distance sensor, which received a transmitted signal from a front driving vehicle to measure the distance between two vehicles, to avoid interference by the own transmitter signal toward the rear following vehicle. In this study, -12dB of interference cancellation ratio was realized by using the phase cancellation method to the transmitted signal from the own vehicle. Proposed phase cancellation method is regarded to have the advantage of continuous monitoring in comparison to the conventional time sharing transmitting and receiving method.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.3 no.4
• /
• pp.11-21
• /
• 2000

The travel behavior should be analysed microscopically for the traffic management of urban street. The car following theory which found out the correlation between the lead and the following vehicles is being widely used as basic data in many fields. As the vehicle position and its speed information can be received by GPS, this technique is recently applying to the various fields. For the case study the travel data were collected with two vehicles equipped with GPS receiver. The moving distance was calculated by the collected location data every 2 seconds and the speed variation was checked. And this study analysed and compared the acceleration and deceleration speed between the lead and the following vehicle. Finally, Regression model about the relationship between the acceleration and deceleration speed and the acceleration and deceleration distance was constructed. This model could be helpful for the road design and the regulation for the safe traffic management.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.21 no.3
• /
• pp.73-82
• /
• 2022

Driver acceptance of autonomous driving is very important. The autonomous driving longitudinal controller, which is one of the factors affecting acceptability, consists of a high-level controller and a low-level controller. The host controller decides the cruise control and the space control according to the situation and creates the required target speed. The sub-controller performs control by creating an acceleration signal to follow the target speed. In this paper, we propose an algorithm to improve the inter-vehicle distance fluctuations that occur in the cruise control and space control switching problems in the host controller. The proposed method is to add an approach algorithm to the cruise control at the time of switching from cruise control to space control so that it is switched to space control at the correct switching distance. Through this, the error was improved from 12m error to 4m, and actual vehicle verification was performed.

• Journal of Mechanical Science and Technology
• /
• v.20 no.11
• /
• pp.2002-2009
• /
• 2006

This paper is primarily focused on the safe navigation between overtaking and overtaken vessels in restricted waterways under the external forces, such as wind and current. The maneuvering simulation between two ships was conducted to find an appropriate safe speed and distance, which is required to avoid collision. From the viewpoint of marine safety, a greater transverse distance between two ships is more needed for the smaller vessel. Regardless of external forces, the smaller vessel will get a greater effect of hydrodynamic forces than the bigger one. In the case of close navigation between ships under the forces of wind and current, the vessel moving at a lower speed is potentially hazardous because the rudder force of the lower speed vessel is not sufficient for steady-state course-keeping, compared to that of the higher speed vessel.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.119-127
• /
• 2011

This paper shows development of 1-3 dimensional hybrid mesh method to analysis flow induced by ultra-high speed vehicle inside a long distance tunnel. For three-dimensional analysis of the tunnel system many meshes are required. However it is not efficient to calculate the whole tunnel system in three-dimension. Therefore in this paper, three-dimension meshes was used to describe stations, shafts and around vehicle, and one-dimension meshes was used to describe the tunnel except these three sections. And unsteady flow analysis of the ultra-high speed vehicle was performed with UDFs in commercial software, Ansys vr. 12.0.