• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.21 no.8
• /
• pp.774-780
• /
• 2011

Recently, customers have been concerned about vehicle NVH depending on vehicle designing and manufacturing technologies development. In choosing vehicle, vehicle NVH is becoming the most important factor to customers. Especially, a seat is the final stage of vibration transfer path to passengers from all sources of vibration like engine, transmission and etc. And seat is the nearest component from driver's ear. For this reason, seat is the most important component that directly related to ride comfort for passengers. And driver can be influenced sensitively by BSR caused by seat. Thus, evaluating the vibration characteristics of vehicle seat and BSR caused by vehicle seat is necessary to reduce the seat BSR. The rattle noise occurred from seat has evaluated through sound source visualization and multi-dimensional spectral analysis - coherence function technique in this paper. Vibration characteristics of the seat has verified through modal test.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.18 no.3
• /
• pp.110-115
• /
• 2010

This paper studies the vibration characteristics of a vehicle seat on several driving conditions. Modal test for a vehicle seat is conducted for the three different boundary conditions: on the rigid jig, BIW and the full vehicle. In driving on various road conditions and speeds, vibration level is measured at several locations including seat mounting and seat-back. The vibration pattern for each driving condition is found where the suspension mode and the 1st bending and torsion modes of the seat make the major contribution on it.

• Journal of Auto-vehicle Safety Association
• /
• v.14 no.4
• /
• pp.27-34
• /
• 2022

In the development of automated driving, interest in the interior parts of vehicle is to become more significant in terms of the occupant safety and comfort. This study proposed an optimal design of front seat according to the design requirements for frame stiffness and seat comfort. For the seat comfort, the appropriate foam thickness was obtained using the structural analysis under reclined occupant loadings. While the strength and stiffness analyses were performed to evaluate the seat frame structure. Topology optimization was carried out based on the simulation results and the derived optimal model and baseline seat design was updated. The conceptual seat design for the autonomous vehicle in this study showed that the model development process is appropriate for the design parameters in both frame stiffness and seat comfort.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2013.04a
• /
• pp.780-787
• /
• 2013

Virtual Seat Method (VSM) is used in this study for a combined evaluation method (objective & subjective) to determine comfort value of passenger vehicle seat in terms of idle vibration. In the study, a process for applying VSM divided into two stages is established. Two kinds of seat mounting passenger vehicle and six subjects are employed to compare the comfort value obtained by VSM method and by SEAT value. As a conclusion, the results by the two methods were well consistent so that VSM is verified as a method to measure ride comfort of seat in terms of idle vibration at passenger vehicle.

• Journal of Environmental Health Sciences
• /
• v.38 no.5
• /
• pp.393-397
• /
• 2012

Objectives: The objectives of this study were to measure passengers' exposure to ultrafine particles (UFP) and to determine effects of fuel, operating condition and position of seat. Method: UFP exposures in front and back seats of the Elephant vehicle in Seoul Grand Park were simultaneously measured by a condensation particle counter (P-Trak model 8525, TSI). The measurements were conducted 7 times with diesel-powered vehicle and 3 times with electricity vehicle in one day. The vehicle stopped at 3 locations along with 2.2 km of driving route. Results: UFP concentration in diesel-powered vehicle was significantly higher than electricity vehicle. At front seat of diesel-powered vehicle, average UFP exposure during stopping was significantly higher than during moving. When diesel-powered vehicle moved, UFP exposure in back seat was significantly higher than in front seat. Conclusions: Passengers in the diesel-powered Elephant vehicle could be exposed to high level of UFP. The UFP exposure was associated with operation condition and position of seat.

• Journal of the Ergonomics Society of Korea
• /
• v.29 no.4
• /
• pp.625-629
• /
• 2010

This study has confirmed that subjective positive and negative aspects a driver feels by applying haptic seat on a vehicle to substantiate vehicle navigation system. Our experiment with total twenty subjects provides that the reaction time (RT) is superior in haptic interface than visual or auditory interface but subjective satisfaction, which subjects feel, and workload is less low in a simulator environment. Although, the difference of individuals and unfamiliarity is relatively high inasmuch as the experiment of absolutely new technology, but overall satisfaction of haptic seat is high. The result of study provides some consideration and direction to need in implementation of a haptic seat and it also confirms their possibility meaningfully. We expect the interaction between a driver and a vehicle and safety improvement potentially through applied haptic seat on actual vehicles.

• International Journal of Automotive Technology
• /
• v.6 no.4
• /
• pp.383-390
• /
• 2005

This study proposes an innovative design guideline to assist the evaluation and improvement of the dynamic comfort of vehicle seating. The existing evaluation method for the comfort of vehicle seating was investigated to broach problems in evaluation. It was found that the currently existing evaluation method employs the resonance frequency of the vibration system composed of the seat and the human body and the maximum vibration transmissibility. This study proposes a design guideline aimed at the enhancement of vibration transmission characteristics above the resonance range, particularly within the range of 10-18 Hz. In order to meet this guideline, a seat was constructed out of foam having a low damping coefficient. It was then installed in a vehicle for a driving test. The driving test confirmed the improvement of the dynamic comfort of the seat. The result of evaluation of the improved seat using the SEAT index, an industry standard widely used to evaluate the dynamic comfort of a seat considering the perceptivity characteristics of the human body, showed that the perceptive vibration transmission had reduced by more than $11\%$. The effect of the modification of seat foam was also verified through a subjective assessment of dynamic comfort of the seats.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.17 no.4
• /
• pp.1-9
• /
• 2009

A simplified model of seat-human body is presented to analyze vibrations of human body on a seat of vehicle. The theoretical model having seven degrees-of-freedom is composed of the inter-connected masses, springs and dampers. Until now, evaluation of ride comfort has been usually performed only through vehicle tests. This study aims to complement shortcomings of conventional vehicle tests in evaluation of ride comfort by using the theoretical model. The acceleration values of the human body are obtained from frequency response functions of the theoretical model. Thereafter, Ride and SEAT indexes are acquired by considering response characteristics of the human body for the 12 axes that are presented in BS 6841. A vehicle test is carried out to measure the acceleration values for the three parts of the human body such as upper body, hip and foot. Ride and SEAT indexes of the vehicle test are also obtained by considering the response characteristics of the human body, of which results are compared with the values from the theoretical model. It is found that the theoretical results are in good agreement with the experimental results.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.23 no.7
• /
• pp.631-639
• /
• 2013

Virtual seat method(VSM) which is an evaluation method combined objective and subjective process is used in this study in order to determine seat comfort index of idle vibration of passenger vehicle. The VSM is implemented by two steps which are for objective index in the first step and for subjective estimation in the second step. In the study, two seats mounted on passenger vehicle was compared in terms of dynamic seat comfort by six subjects employed for the VSM method as well as SEAT value which is a conventional objective method. It is concluded that the dynamic comfort index by the VSM is more reliable than the SEAT value thanks to adding subjective evaluation on top of the objective result.

• Industrial Engineering and Management Systems
• /
• v.8 no.2
• /
• pp.121-130
• /
• 2009

Subjective evaluation has always been regarded as a branch of social science research. Hence, in scientific and especially engineering points of view, its development is always taken for granted despite the importance of its effects on the design and development decisions. In the past, at least two automotive seat survey questionnaires have been developed with high statistical validity and reliability. Nonetheless, both were not local while subjective perception very much depends on demographic background factors. It is felt that since vehicle seat comfort is an important aspect in a seat design, a local sense should be put into the survey that is used as the subjective tool. The proposed vehicle seat discomfort survey questionnaire was developed in dual languages; English and Malay. Malay language is the national language of Malaysia, where the survey was tested. Beside inputs from literatures, key informant interviews helped in establishing the appropriate terms used as survey items. Three experimental runs on two different seats by 22 paid subjects showed that the developed questionnaire is reliable and valid. Furthermore, criterion validity analysis on the survey and previously developed survey showed significant correlation at 0.01 significance level.