• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.18 no.4
• /
• pp.31-43
• /
• 2019

Take-overs occur in autonomous vehicles at levels 3 and 4 based on SAE. For safe take-over, it is necessary to set the time required for diverse drivers to complete take-over in various road conditions. In this study, take-over time and stabilization characteristics were measured to secure safety of take-over in autonomous vehicle. To this end, a virtual driving simulator was used to set up situations similar to those on real expressways. Fifty drivers with various sexes and ages participated in the experiment where changes in traffic volume and geometry were applied to measure change in takeover time and stabilization characteristics according to various road conditions. Experimental results show that the average take-over time was 2.3 seconds and the standard deviation was 0.1 second. As a result of analysis of stabilization characteristics, there was no difference in take-over stabilization time due to the difference of traffic volume, and there was a significant difference by curvature changes.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.24 no.4
• /
• pp.305-316
• /
• 2022

Hydrogen energy is emerging as an alternative to the depletion of fossil fuels and environmental problems, and the use of hydrogen vehicles is increasing in the automobile industry as well. However, since hydrogen has a wide flammability limit of 4 to 75%, there is a high concern about safety in case of a hydrogen car accident. In particular, in semi-enclosed spaces such as tunnels and underground parking lots, a fire or explosion accompanied by hydrogen leakage is highly likely to cause a major accident. Therefore, it is necessary to review hydrogen safety through analysis of flammability areas caused by hydrogen leakage. Therefore, in this study, the effect of the air velocity in the tunnel on the flammability area was investigated by analyzing the hydrogen concentration according to the hydrogen leakage conditions of hydrogen vehicles and the air velocity in the tunnel in a road tunnel with standard section. Hydrogen leakage conditions were set as one tank leaking and three tanks leaking through the TPRD at the same time and a condition in which a large crack occurred and leaked. And the air velocity in the tunnel were considered 0, 1, 2.5, and 4.0 m/s. As a result of the analysis of the flammability area, it is shown that when the air velocity of 1 m/s or more exists, it is reduced by up to 25% compared to the case of air velocity of 0 m/s. But there is little effect of reducing the flammability area according to the increase of the wind speed. In particular, when a large crack occurs and completely leaks in about 2.5 seconds, the flammability area slightly increases as the air velocity increases. It was found that in the case of downward ejection, hydrogen gas remains under the vehicle for a considerably long time.

• Journal of Korean Society of Transportation
• /
• v.19 no.3
• /
• pp.45-58
• /
• 2001

Subjective mental workload assessment technique becomes a standard human factors and human-machine interface evaluation tool for the evaluation of ITS(Intelligent Transport Systems)-oriented information systems as well as the drivers visual activity analysis, physiological indices(GSR, EEG, ECG, etc.), secondary task performance, reaction time. vehicle control parameters(speed, steering behavior, accelerator control) that are widely applied for transportation and vehicle systems to evaluate the safety, to decide the system or design alternatives, and to establish the design guidelines. This paper reviewed and compared the most globally employed four mental workload assessment techniques that have been designed for the use of various human-machine systems and ITS-oriented in-vehicle information systems. NASA-TLX(National Aeronautics and Space Administration-Task Load Index). SWAT(Subjective Workload Assessment Technique), MCH(Modified Cooper-Harper) scale, and recently developed RNASA-TLX(Revision of NASA-TH) were compared in terms of sensitivity and subjective evaluations to derive the human-machine interface evaluation guidelines for the application of ITS-oriented in-vehicle information systems. Then, experiment results supported that RNASA-TLX is the prospective tool for the mental workload assessment of ITS-oriented in-vehicle information systems.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.12
• /
• pp.5669-5675
• /
• 2012

To reduce the cost and the time of transport in Eurasian railroad networks such as TKR(Trans-Korea Railway), TCR(Trans-China Railway) and TSR(Trans-Siberia Railway) owing to the problem of different track gauges (narrow/standard/broad gauge), it is important to develop the gauge-adjustable wheelset(GAW) system to adapt easily to these gauges. The Korean GAW system is developing and will be adapting to the brand new freight trains' to improve the conventional overseas GAW system. In this study, structural and durability analyses are performed from the viewpoint of the safe-life design. The core parts of the system might be safe in range of $1{\times}10^7$ cycles from the result of durability analysis. Moreover, to examine the safety of the system while running on a track, rig fatigue test was performed according to UIC code. The safety of the Korean GAW system is demonstrated through testing that all safety-relevant conditions are satisfied.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.12
• /
• pp.93-99
• /
• 2017

The rate of traffic accidents that occurred in Korea last year is 10 out of every 100,000 people, ranking it 6th among the 35 OECD member countries. The accident rate of children with disabilities and elderly people is also high. The purpose of this study is to introduce traffic safety facilities which have been developed for the reduction of traffic accidents in non-urban areas in Korea through an analysis of the related literature, the accident factors using traffic accident analysis system data and traffic accident characteristics. Traffic safety integrated facilities for ICT-based pedestrian crossings are subject to cross-sectional coverage of child protection zones. The smart safety fence prevents vehicles from parking illegally and informs pedestrians that there is an access vehicle on the pedestrian crossing. The smart bump is designed to warn drivers who are not aware of the pedestrians. In order to standardize the appropriate form and size of the traffic safety facilities for pedestrian crossings, we constructed a standard model for each type, considering the road function, press classification, power, lane number, geometric form, etc. As a result, the rate of traffic accidents involving vulnerable people was reduced. In addition, it is anticipated that the maintenance costs will be reduced by the use of a solar power supply and their compatibility with the existing installed safety fences.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.18 no.5
• /
• pp.34-48
• /
• 2019

The purpose of this study was two-fold; first, to develop safety performance functions (SPF) using transportation-related big data for all types of roads in Korea were developed, Second, to provide basic information to develop measures for relatively dangerous roads by evaluating the safety grade for various roads based on it. The coordinates of traffic accident data are used to match roads across the country based on the national standard node and link system. As independent variables, this study effort uses link length, the number of traffic volume data from ViewT established by the Korea Transport Research Institute, and the number of dangerous driving behaviors based on the digital tachograph system installed on commercial vehicles. Based on the methodology and result of analysis used in this study, it is expected that the transportation safety improvement projects can be properly selected, and the effects can be clearly monitored and quantified.

• International Journal of Highway Engineering
• /
• v.10 no.4
• /
• pp.247-255
• /
• 2008

According to "A guide Book to Highway Design", most road elements are chosen based on a certain design speed in order to ensure obtaining safe and smooth traffic operating. However, road safety in practical way is corelative to not only all element of roads but also road shape, for example, between straight line and curves line and between curved lines. Also, it is relates to alignments such as horizontal alignment, vertical alignment, and cross section. That is, the practical road design should be examined in both sides of 3 dimension and consecutiveness as the practical road is a 3-dimensional successive object. The paper presents a concept for acceleration to evaluate consistency of road considering actual road shape on 3-dimension. Acceleration of vehicle is influential to road consistency based on running state of vehicle and state of drivers. Especially, the magnitude of acceleration is a quite influential element to drivers. Based on above, the acceleration on each point 3-D road can be calculated and then displacement can be done. Computation of acceleration means total calculation on each axis.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.18 no.4
• /
• pp.18-30
• /
• 2010

As the automobile industry is developing, the number of deaths and injuries has increased. To reduce the damages from automobile accidents, the government of each country proposes experimental conditions for reproducing the accident and establishes the vehicle safety regulations. Automotive manufacturers are trying to make safer vehicles by satisfying the requirements. The Hybrid III crash test dummy is a standard Anthropomorphic Test Device (ATD) used for measuring the occupant's injuries in a frontal impact test. Since a real crash test using a vehicle is fairly expensive, a computer simulation using the Finite Element Method (F.E.M.) is widely used. Therefore, a detailed and robust F.E. dummy model is needed to acquire more accurate occupant injury data and behavior during the crash test. To achieve this goal, a detailed F.E. model of the Hybrid III 5th percentile female dummy is constructed by using the reverse engineering technique in this research. A modeling process is proposed to construct the F.E. model. The proposed modeling process starts from disassembling the physical dummy. Computer Aided Design (CAD) geometry data is constructed by three-dimensional (3-D) scanning of the disassembled physical dummy model. Based on the geometry data, finite elements of each part are generated. After mesh generation, each part is assembled with other parts using the joints and rigid connection elements. The developed F.E. model of dummy is simulated based on the FMVSS 572 validation regulations. The results of simulation are compared with the results of physical tests.

• International Journal of Aeronautical and Space Sciences
• /
• v.16 no.1
• /
• pp.1-7
• /
• 2015

In order to provide some references for suitability of carrier-based aircrafts, this paper studies the flow field of exhaust jets and its impact on the flight deck. The geometrical models of aircraft carrier and carrier-based aircrafts are firstly built, on which unstructured tetrahedral meshes are generated for numerical analysis. Then, this paper simulates the flow field of exhaust jets to evaluate its impact on the Jet Blast Deflector (JBD) and the flight deck, when four carrier-based aircrafts are ready to start off in the bow. The standard k-${\varepsilon}$ equations, three-dimension N-S equations and the Computational Fluid Dynamics (CFD) theory are used in the analysis process. To solve the equations, the thermal coupling of the wind and the jet flow are also considered. The velocity and temperature distributions are provided with the simulation of the CFD software, FLUENT. The results indicate that: (1) this analytical method can be used to simulate aerodynamic problems with complex geometrical models, and the results are of high reliability; (2) the safety working area, the installation scheme of the JBD and the arrangement of the take-off position can be optimized through analysis.

• The Journal of Korean Obstetrics and Gynecology
• /
• v.34 no.4
• /
• pp.111-130
• /
• 2021

Objectives: The purpose of this study was to identify the current status of Korean medicine clinical practice for pregnant patients. Methods: The study is conducted by searching medical records of 209 pregnant patients using Korean Standard Classification of Diseases related pregnancy at the Korean Gynecology Clinic of traditional Korean medicine hospital from March 1, 2016 to February 28, 2021. We retrospectively investigated characteristics, symptoms, pregnancy outcomes of the patients and treatments for the patients. Results: The most frequent symptoms of pregnant patients were musculoskeletal symptoms (60.63%) followed by neuropsychiatric symptoms (14.55%) and genital symptoms (10.82%). The most common contributory factor of the symptoms was the motor vehicle accident (74.64%). Acupuncture (94.94%) and moxibustion (90.91%) were performed to most pregnant patients. Cupping (86.60%), herbal medicine (52.63%), Chuna therapy (30.62%), and pharmacopuncture (21.05%) were performed to the patients. Normal pregnancy maintenance and delivery were reported by 147 patients (91.30%). Premature birth was reported by 11 patients (6.83%), and miscarriage was reported by 3 patients (1.86%). Conclusions: Most patients were the patients with musculoskeletal symptoms injured by motor vehicle accidents. Various Korean medicine treatments were performed during pregnancy with safety outcomes. This study could be used as basic data to provide instructions for the development of traditional Korean medicine in the obstetric clinical fields.