• 대한안전경영과학회지
• /
• 제20권2호
• /
• pp.1-8
• /
• 2018

This study aims to provide a real-time information to the driver by effectively operating the advanced safety device attached to the freight vehicle, thereby minimizing insecure behavior of the driver such as speeding, rapid acceleration, sudden braking, And improve driving habits to prevent accidents and save energy. Advanced safety equipment is a device that warns the driver that the vehicle leaves the driving lane regardless of the intention of the driver and reduces the risk of traffic accidents by mitigating or avoiding collision by detecting a frontal collision during driving.The main contents of this report are as follows: In case of installing a warning device on a lane departing vehicle (excluding a light vehicle) and a lorry or special vehicle with a total weight exceeding 3.5 tonnes, the driver must continue to operate unless the driver releases the function.In addition, when the automatic emergency braking system is installed, the structure should be such that the braking device is operated automatically after warning the driver when the risk of collision with the running or stopped vehicle in the same direction is detected in front of the driving lane.

• 대한안전경영과학회지
• /
• 제6권4호
• /
• pp.139-153
• /
• 2004

Korea Railroad Research Institute(KRRI) has developed the rubber-tired AGT system from 1999 to 2004. The rubber-tired AGT vehicle is now on test for its performance and function in the Gyeong-San test line. In this paper, we provide the reliability management plan to assure required the RAMS(reliability, availability, maintainability 8t safety) of the AGT vehicle system.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2004년도 추계학술대회
• /
• pp.171-182
• /
• 2004

Korea Railroad Research Institute(KRRI) has developed the rubber-tired AGT system from 1999 to 2004. The rubber-tired AGT vehicle is now on test for its performance and function in the Gyeong-San test line. Tn this paper, we provide the reliability management plan to assure required the RAMS(reliability, availability, maintainability & safety) of the AGT vehicle system.

• 대한산업공학회지
• /
• 제41권4호
• /
• pp.352-358
• /
• 2015

It is important to guarantee the safety of vehicle to minimize the damage to the driver in case of the accidents. In order to inspect and later enhance the safety of vehicle, the owner of the vehicle usually have a vehicle safety inspection. The Korea Transportation Safety Authority (KOTSA) issues the Comprehensive Performance Inspection Certificate after vehicle inspection. The certificate only specify the legal inspection criteria for safety and measured values of the safety parameters, however, as ordinary driver in lack of expert knowledge about the vehicle is difficult to understand the contents of the Certificate. Thus, in this paper, the authors try to give the information about the inspection results in easier way to understand. This information not only guarantees the owner of the vehicle to better understand the inspection results, but it also gives the opportunity to the driver to deal with the specific problem listed in the results. The methods in this paper are to transform the vehicle inspection data into the non parametric distribution to easily represent the values to the index later on. Also, example indexes are presented to the actually inspected vehicle based on the reference distribution to show the better assessment of the developed method.

• 자동차안전학회지
• /
• 제14권2호
• /
• pp.83-89
• /
• 2022

Recently, the use of ATV (All-Terrain Vehicle) has increased due to increase in leisure activities, and the awareness of safety and traffic accidents has improved, but it still insignificant compared to other transportation. Therefore, in this study, the current status and characteristics of traffic accidents related to ATVs were investigated, and actual ATV accident was analyzed. As a result, it was confirmed that the condition of the braking system directly connected to the safety of the ATV was not well maintained. For driver safety in the future, it is considered that it is necessary to strengthen safety regulations related to experience centers and rental companies handling AVTs and to conduct regular inspections in accordance with the Motor Vehicle Management Act.

• 한국안전학회지
• /
• 제26권6호
• /
• pp.111-117
• /
• 2011

Risk-based railway safety management has been mandatory in Korea as by relevant laws and regulations enacted since the Railway Safety Act 2004. In particular, the Railway Vehicle Safety Guidance came into effect on Jan 1, 2008 specifies the details of methodology for hazard analysis, risk assessment and safety verification and validation. Fundamentals for success of the risk-based safety management are systematic hazard identification and risk assessment by use of reasonable risk assessment criteria, but the principle of risk-based safety management has not been applied in an effective way to introduction and maintenance of railway vehicle systems because definite risk assessment criteria have not been set down for each railway system or railway network. The purpose of this study is to suggest a risk matrix development principle for risk assessment of domestic urban metro vehicles by analyses of relevant rules and railway operating environment of Korea.

• 대한안전경영과학회지
• /
• 제10권1호
• /
• pp.155-166
• /
• 2008

During last two decades the transportation system has developed into very intelligent system with GIS, GPS and ITS. The practical transportation management system provides real time response module to manage the customer's order. We have surveyed research papers on the real time vehicle routing problem in last two decades to figure out the dynamic vehicle routing problem. The papers are classified by basic routing algorithms and by managing the dynamic events which are the order management, the routing re-optimization, the routing post-optimization and the waiting strategy.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2005년도 춘계학술대회
• /
• pp.259-266
• /
• 2005

In this paper, we developed a vehicle condition monitoring system that checks vehicle conditions, and transmits and displays them to a driver for safety and effective maintenance. We used a CAN controller and transceiver to establish the CAN communication that has been used commonly inside an actual vehicle for the collection of vehicle's status information. To validate the operation of the developed system, we have confirmed the accuracy and stability of data transmission and reception of vehicle information.

• 한국안전학회지
• /
• 제34권4호
• /
• pp.6-14
• /
• 2019

There are about 38,977 CNG cars and 247 natural gas vehicle charging stations in operation in order to improve the urban air environment. With the introduction of natural gas vehicles, the atmospheric environment, which was the main cause of air pollution in the metropolitan area, was remarkably improved. However, unlike these positive effects, CNG bus accidents, which occurred more than 10 times since 2005, have caused concern among the majority of citizens using public transportation. It is necessary to make a judgment on the feasibility and future direction of CNG pressure vessel safety management that can safeguard the safety of CNG pressure vessel at the time of starting. In this study, we investigates production and use of CNG vessel, the current status of safety management of CNG bus transportation companies & charging stations and then proposes measures to prevent accident recurrence and safety management based on the actual situation investigation and analysis.

• 대한안전경영과학회지
• /
• 제14권1호
• /
• pp.65-73
• /
• 2012

We studied the risk analysis of fire and explosion caused by gas leak in underground-parking of gas vehicle. However, an entrance regulation of gas vehicles (H2/LPG/CNG etc.) to underground garages has not been enacted in Korea. Incase, a gas explodes in an underground parking garage placed in overcrowded residential area, such as an apartment, the scale of the damage would cause tremendous disaster. Faults of vehicle parts and management problems were evaluated by using the Failure mode and effect analysis (FMEA), which is a qualitative analysis method. The range of the damaged area by the explosion and the damage scale by the explosion pressure were analyzed by using the process hazard analysis software tool (PHAST). The study is expected to facilitate enactment of the regulation for the underground parking to restrict the gas vehicle.