• 제목/요약/키워드: Vehicle Periodic Inspection

검색결과 6건 처리시간 0.02초

자동차 정기검사 주기에 관한 고찰 (A Consideration on the Inspection Frequency of the Periodic Technical Vehicle Inspection)

  • 임재문;정영달;여운석;강병도;윤영한
    • 자동차안전학회지
    • /
    • 제4권2호
    • /
    • pp.17-21
    • /
    • 2012
  • The periodic technical vehicle inspection is to prevent the accident through the finding and fixing the defects of the vehicle. The periodic technical vehicle inspection in Korea was studied for assessing the adequacy of the inspection frequency. The inspection frequencies of many countries including EU, USA and Japan were compared. The average mileages by the vehicle usage and type were represented. The warranty period and recommended replacement period of parts of the domestic auto makers was studied. Currently, the inspection frequency for the periodic technical vehicle inspection in Korea is appropriate. The pass-fail rate and the cost-benefit analysis for the periodic technical inspection in Korea will be needed in the decision making process for the inspection frequency.

AEBS와 LDWS가 장착된 대형버스의 정기검사를 위한 검사요소 개발 (Development of Inspection Elements for the Periodic Inspection of Large Buses with AEBS and LDWS Installed)

  • 박상협;한종호;윤윤기;이태희;이호상;강병도
    • 자동차안전학회지
    • /
    • 제13권2호
    • /
    • pp.42-49
    • /
    • 2021
  • In this paper, we proposes a study on the derivation of inspection factors for the periodic inspection of large buses equipped with AEBS and LDWS. we investigate the safety evaluation (NCAP) of domestic and foreign vehicles and safety standards for the two functions currently in operation and analyze the evaluation factors, measurement methods and evaluation scenarios and so on. In addition, the test scenario was derived by analyzing the vehicle safety evaluation data already held, Therefore, we use an real large bus and the inspection elements for the periodic inspection were derived.

자동차검사제도의 정량적 효과분석 (Quantitative Effectiveness Analysis of Vehicle Inspection)

  • 조한선;심재익;김종룡
    • 대한교통학회지
    • /
    • 제25권3호
    • /
    • pp.65-74
    • /
    • 2007
  • 1995년 이후 연평균 6.2%의 증가율을 보이는 자동차 등록대수에 반해 연평균 교통사고 발생건수는 1.5%, 사망자 4.7% 및 부상자 0.3%씩 감소추세를 보이고 있어 매우 다행스러운 일이나, OECD국가와 비교해서는 여전히 높은 교통사고율을 보이는 것이 사실이다. 이에 정부 및 각 기관에서는 교통사고를 감소시키기 위해 지속적인 교통안전사업을 추진하고 있으나, 각 제도 및 사업에 대한 시행 효과를 측정하는 부분에 대해서는 소홀히 하고 있는 현실이다. 정부가 교통안전을 위한 사업의 일환으로 시행중인 자동차검사제도는 차량의 도로운행 적합성 확인을 통해 자동차의 안전도 확보 및 교통사고로 인한 국민의 생명과 재산을 보호하는 것을 목적으로 하고 있다. 하지만. 이 제도에 대한 효과분석이 제대로 이루어지지 않은 상황이고, 자동차검사제도와 무관하게 운전자 스스로 자동차의 안전관리 상태를 수시 점검한다는 의견 등 자동차 검사방법, 검사기준, 검사의 실효성 저하에 대한 논의가 지속적으로 제기되고 있는 실정이다. 이에 본 연구에서는 자동차검사제도가 구조장치의 안전성을 향상시키고. 자동차성능을 유지시킴으로써 자동차결함으로 인해 발생 가능한 교통사고의 사전예방에 어느 정도 기여하는지 정량적으로 보임으로써 자동차검사제도의 효과를 측정 해 보고자 하였다. 2005년도 자료를 기준으로 교통사고 감소건수를 추정해 본 결과 자동차검사제도 시행을 통한 교통사고 감소건수는 약 23,735건으로, 이는 2005년 총 교통사고 건수 214,171의 11%에 달하는 것으로 나타났다.

철도교량 자동화 로봇 개발을 위한 기초 연구 (A Study for Developing of Rail Bridge Inspection Robot)

  • 구자경;황인호;이종세;이태식
    • 한국철도학회:학술대회논문집
    • /
    • 한국철도학회 2008년도 춘계학술대회 논문집
    • /
    • pp.188-193
    • /
    • 2008
  • According to introduce KTX in Korea, rail-road bridge section of KTX was increased approximately 50% of the total length. Bridge is required periodic inspection and check to prevent accident and hazard because various damage which have effects on traffic and replacement of damaged parts is difficult. Specifically, the train as large-scale transportation because accidents led to great damage, preventing these accidents are critical. Well-organized management and maintenance systems are required to prevent the accidents. In the case of roadway bridge, bridge inspection vehicle is used to deploy inspectors in roadway bridge. However, this method requires a lot of time and efforts, and inspectors are exposed to potential hazard. Also, surrounding environment like poor lighting system or electric wire could harm the inspector while repairing. Due to this reason, automatic repairing and inspecting system have been introduced to replace the old methods. Management system of the railroad bridge track for trains uses various advanced equipments, but whereas roadway bridge management system is lacking these efforts. As a result of that, this study looks over the existing management method. and review the method to apply the Bridge Inspection Robot in railroad bridge. Moreover, this study suggests future management technology using inspection robot.

  • PDF

VIMS와 DTG 데이터를 이용한 창원시 시내버스 머신러닝 분석 연구 (A Study on the Analysis of Bus Machine Learning in Changwon City Using VIMS and DTG Data)

  • 박지양;정재환;윤진수;김성철;김지연;이호상;류익희;권영문
    • 자동차안전학회지
    • /
    • 제14권1호
    • /
    • pp.26-31
    • /
    • 2022
  • Changwon City has the second highest accident rate with 79.6 according to the city bus accident rate. In fact, 250,000 people use the city bus a day in Changwon, The number of accidents is increasing gradually. In addition, a recent fire accident occurred in the engine room of a city bus (CNG) in Changwon, which has gradually expanded the public's anxiety. In the case of business vehicles, the government conducts inspections with a short inspection cycle for the purpose of periodic safety inspections, etc., but it is not in the monitoring stage. In the case of city buses, the operation records are monitored using Digital Tacho Graph (DTG). As such, driving records, methods, etc. are continuously monitored, but inspections are conducted every six months to ascertain the safety and performance of automobiles. It is difficult to identify real-time information on automobile safety. Therefore, in this study, individual automobile management solutions are presented through machine learning techniques of inspection results based on driving records or habits by linking DTG data and Vehicle Inspection Management System (VIMS) data for city buses in Changwon from 2019 to 2020.

열차주행특성을 고려한 레일표면결함 분석 (Evaluation of Rail Surface Defects Considering Vehicle Running Characteristics)

  • 최정열
    • 문화기술의 융합
    • /
    • 제10권3호
    • /
    • pp.845-849
    • /
    • 2024
  • 현재 도시철도 레일의 노후화로 인한 레일표면결함이 증가하고 있으나 국가에서 제정된 궤도성능평가에 관한 세부지침에서 레일표면손상을 기술자의 육안, 간단한 측정 도구로 점검을 수행하는 실정이다. 주기적인 선로순회작업 및 육안점검을 통해 레일표면의 결함을 발견하는 것은 매우 중요하다. 그러나 점검자의 주관적 판단에 의해 레일표면의 결함의 경중을 평가하는 것은 레일 내부의 손상을 예측하기에 상당한 제약이 따른다. 본 연구에서는 레일표면손상에 따른 레일내부 균열특성에 관한 연구로서 현장측정에서는 레일표면 손상개소를 선정하여 가속구간 및 제동구간의 노후레일 시료를 채취하여 레일표면손상 상태를 평가하고자 전자주사현미경(SEM)을 이용하여 균열특성을 분석하였다. 분석결과, 주행 중인 열차로 인해 발생하는 균열 메커니즘과 레일표면방향으로 올라오는 각도로 균열이 발생하는 가속구간의 균열특성을 실험적으로 입증하였다.