• 전자공학회논문지
• /
• 제51권9호
• /
• pp.208-214
• /
• 2014

차선유지 제어시스템, 적응식순항 제어시스템과 같은 첨단운전 지원시스템은 기본적으로 차량의 거동 정보를 기반으로 구동되지만, 최근 도로의 기하학적 정보를 추가적으로 활용하는 연구가 활발히 진행되고 있다. 특히, 도로의 종단경사는 차량의 가감속 제어 및 항법알고리즘 구현에 있어 필수적인 정보로서 DGPS-RTK와 같은 고가의 장비로 직접 측정하는 방법과 디지털 맵에 저장된 속성정보를 활용하는 방식이 제안되고 있으나, 상용화 관점에서는 아직 많은 문제점이 존재한다. 따라서, 본 논문에서는 추가 센서의 장착없이 연속형 확장칼만필터를 활용하여 차량의 동특성과 도로종단경사를 효율적으로 추정하는 알고리즘을 제안한다. 도로종단경사를 포함하는 3자유도 차량동역학 모델과 차량의 내부 네트워크롤 통해 수집할 수 있는 차량의 상태정보를 기반으로 확장칼만필터를 설계하여 차량의 동특성과 도로종단경사를 추정한다. 제안된 알고리즘은 시뮬레이션과 실차실험을 통해 그 성능을 검증하였다.

• 한국통신학회논문지
• /
• 제37권6C호
• /
• pp.483-491
• /
• 2012

자동차 간 (Vehicle-to-Vehicle) 통신에서, 각각의 자동차들은 위치, 속도, 조향 등의 정보를 포함하는 비컨 메시지를 주변의 자동차들에게 주기적으로 방송함으로써, 이들로 하여금 자신의 주행 정보를 인지할 수 있도록 한다. 그런데, 단순한 비컨 메시지의 방송은 메시지 수신 확률을 감소시키고 지연 시간을 크게 증가시키는 원인이 된다. 따라서, 본 논문에서는 비컨주기 (Beacon Period), 반송파감지거리 (Carrier-Sensing Range), 그리고 IEEE 802.11 DCF 졍쟁구간크기 (Contention Window Size)가 자동차 간 통신의 성능에 미치는 영향을 수학적으로 분석하고자 한다. 우선, 측위 오차의 임계값으로부터 자동차 운전 속도에 반비례하는 비컨주기를 도출하고, 이를 기반으로 비컨 메시지로 인한 DSRC 채널의 최대 부하를 수학적으로 유도한다. 비컨 메시지의 부하가 특정 임계치 이하가 되도록 반송파감지거리를 결정하는 수학적 모형을 유도하고, 수율을 최대화하는 DCF 경쟁구간크기에 대한 닫힌 근사해를 제시한다.

• 로봇학회논문지
• /
• 제12권2호
• /
• pp.184-193
• /
• 2017

This work shows how to create an algorithm and implementation for motion and image matching between a vehicle simulator and Unity 3D based virtual object. The motion information of the virtual vehicle is transmitted to the real simulator via a RS232 communication protocol, and the motion is controlled based on the inverse kinematics solution of the platform adopting rotary-type six actuators driving system. Wash-out filters to implement the effective motion of the motion platform are adopted, and thereby reduce the dizziness and increase the realistic sense of motion. Furthermore, the simulator system is successfully designed aiming to reducing size and cost with adaptation of rotary-type six actuators, real driving environment via VR (Virtual Reality), and control schemes which employ a synchronization between 6 motors and 3rd order motion profiles. By providing relatively big sense of motion particularly in impact and straight motions mainly causing simulator sickness, dizziness is remarkably reduced, thereby enhancing the sense of realistic motion.

• International Journal of Automotive Technology
• /
• 제8권6호
• /
• pp.753-760
• /
• 2007

In this paper, a roll and pitch estimation algorithm using a set of accelerometers and wireless sensor networks(S/N) is presented for use in a passenger vehicle. While an inertial measurement unit(IMU) is generally used for roll/pitch estimation, performance may be degraded in the presence of longitudinal acceleration and yaw motion. To compensate for this performance degradation, a new roll and pitch estimation algorithm is proposed that uses an accelerometer array, global positioning system(GPS) and in-vehicle networks to get information from yaw rate and roll rate sensors. Angular acceleration and roll and pitch approximation are first calculated based on vehicle kinematics. A discrete Kalman filter is then applied to estimate both roll and pitch more precisely by reducing noise from the running engine and from road disturbance. Finally, the feasibility of the proposed algorithm is shown by comparing its performance experimentally with that of an IMU in the framework of an indoor test platform as well as a test vehicle.

• 대한교통학회지
• /
• 제29권5호
• /
• pp.107-120
• /
• 2011

대기오염물질과 온실가스가 주는 폐해는 점차 심각한 수준으로 발전하고 있는 상황에서 자동차에 의한 배출가스가 대표적인 배출원의 하나로 손꼽히고 있다. 교통부문에 있어서는 교통운영전략 등에 의해 배출가스량을 억제 및 관리할 수 있는 방법론에 대한 연구가 필요한 상황이나 아직까지 차량의 운행행태 즉 가속, 감속, 정지 시 등에 따른 배출량을 산정할 수 있는 모형에 대한 연구는 미미한 수준이다. 본 연구에서는 신호교차로와 같은 도로를 주행하는 차량이 가속, 감속 정지 하면서 배출하는 배출가스량을 산정할 수 있는 모형을 구축하였으며 이를 위하여 차량 실험을 기반으로 배출량표를 작성하고 차량의 움직임을 운동학적 접근법으로 분석하여 모형을 구축하였다. 최종적으로는 미시적 시뮬레이터와 배출표를 이용하여 가장 현실적인 배출량 산정체계를 구축하여 모형을 검증, 평가하였다. 평가 결과 기존의 평균주행속도를 이용한 배출모형 보다 상대적으로 정확한 배출량을 산정하는 것으로 분석되었다.

• 자동차안전학회지
• /
• 제10권3호
• /
• pp.7-12
• /
• 2018

The Korean New Car Assessment Program (KNCAP) is a program to evaluate the safety of automobiles. In the safety assessment method, there are frontal collision, partial frontal collision, side collision, pillar collision, and left stability in the collision safety category. Among them, Korean in-depth analysis data shows that there are a lot of side collision accidents and it is necessary to protect them. This study will analyze the side collision accident that occurred in actual traffic accident based on Korea In-Depth Accident Study (KIDAS) and investigate the effect of center airbag on passenger in under side collision. In addition, with simulated side collision scenarios in the various side impact directions, it was investigated how the center airbag affects the driver and passenger in terms of kinematic and injury levels.

• 대한기계학회논문집
• /
• 제15권5호
• /
• pp.1447-1454
• /
• 1991

본 로봇은 wheeled type과 legged type의 장점을 함께 가지고 있으므로 주행 속도가 빠르며 환경적응력이 좋다. 기존 로봇과 비교할때 Y.Icihkawa등이 개발한 HLV와 가장 유사하지만 모터 3개로 6개의 바퀴-다리 유닛을 구동하므로 모터15개로 5개의 바퀴-다리유닛을 구동하는 Ichikawa HLV와 동력전달구조에서 많이 상이하다. 뿐만아니라 본 로봇은 3개의 모터만 사용했기 때문에 주행제어가 훨씬 간단하고 제작 비가 저렴하며 장애물 및 계단승강시 걸음새가 훨씬 간단하다.(Ichikawa HLV 경우 뒷 쪽 2개의 다리를 동시에 들 수 없기 때문에 계단 승강시 몸체 회전을 적절하게 섞어야 한다.)

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.709-712
• /
• 2003

The existing technical limitation makes engineer imitate nature to solve engineering problems. Recently Micro Air Vehicle(MAV) imitating the mechanism of birds or insects is being developed. Especially Ultra Flite supported by DARPA is studying hummingbird aerodynamics to relate that information to MAV. To drive MAV bender piezoelectric(PZT) actuators are used due to the convinience of control and the small size. But the displacement of the PZT actuators are very small, and the wing driving mechanism which amplifies the stroke generated by the PZT actuators has constraints in design and manufacture because of the small dimension. In this paper a wing design concept and a efficient driving mechanism are proposed. Electroactive polymers(EAPs) are used as wing mechanism actuators. Using OpenGL the mechanisms are simulated graphically. Also a prototype actuator is being developed and verified by digital Mockup with CATIA. Basic kinematics of the mechanism is studied.

• International Journal of Aeronautical and Space Sciences
• /
• 제13권1호
• /
• pp.90-98
• /
• 2012

In this paper, the Integrated Guidance and Control (IGC) law is proposed for the Rotary Unmanned Aerial Vehicle (RUAV). The objective of the IGC law is to consider the nonlinear dynamic characteristics of the RUAV and to design a guidance law which takes into consideration the nonlinear relationship between kinematics and dynamics. In order to control the RUAV system, sliding mode control scheme is adopted. As the RUAV is an under-actuated system, a slack variable approach is used to generate the available control inputs. Through the Lyapunov stability theorem, the stability of the proposed IGC law is proved. In order to verify the performance of the IGC law, numerical simulations are performed for waypoint tracking missions.

• 로봇학회논문지
• /
• 제7권4호
• /
• pp.259-266
• /
• 2012

In these days, researches about underwater robots have been actively in progress for the purposes of ocean detection and resource exploration. Unlike general underwater robots such as ROV(Remotely Operated Vehicle) and AUV(Autonomous Underwater Vehicle) which have propellers, an articulated underwater robot which is called Crabster has been being developed in KORDI(Korea Ocean Research & Development Institute) with many cooperation organizations since 2010. The robot is expected to be able to walk and swim under the sea with its legs. Among many researching fields of this project, we are focusing on a swimming section. In order to find effective swimming locomotion for the robot, we approached this subject in terms of Biomimetics. As a model of optimized swimming organism in nature, diving beetles were chosen. In the paper, swimming motions of diving beetles were analyzed in viewpoint of robotics for applying them into the swimming motion of the robot. After modeling the kinematics of diving beetle through robotics engineering technique, we obtained swimming patterns of the one of living diving beetles, and then compared them with calculated optimal swimming patterns of a robot leg. As the first trial to compare the locomotion data of legs of the diving beetle with a robot leg, we have sorted two representative swimming patterns such as forwarding and turning. Experimental environment has been set up to get the motion data of diving beetles. The experimental equipment consists of a transparent aquarium and a high speed camera. Various swimming motions of diving beetles were recorded with the camera. After classifying swimming patterns of the diving beetle, we can get angular data of each joint on hind legs by image processing software, Image J. The data were applied to an optimized algorithm for swimming of a robot leg which was designed by robotics engineering technique. Through this procedure, simulated results which show trajectories of a robot leg were compared with trajectories of a leg of a diving beetle in desired directions. As a result, we confirmed considerable similarity in the result of trajectory and joint angles comparison.