• Journal of the Korea Convergence Society
• /
• v.12 no.4
• /
• pp.1-8
• /
• 2021

Currently, lithium-ion batteries are mainly used in energy storage equipment products including automobiles. This can be exposed to dangerous situations such as explosions in the event of incorrect battery management conditions that are overcharged or left in high temperature conditions. It also causes a situation battery cannot be used when it has been over discharged. Therefore, a system that manages the state of the battery is required. The battery management system aims to obtain optimum battery efficiency by accurately recognizing the state of the battery and keeping the voltage of each cell constant. In this paper, we develop a lithium-iron phosphate battery that has higher safety than a general lithium-ion battery. Then, in order to manage this, we try to develop the algorithm of the BMS module based on the Bluetooth communication using the MATLAB-SIMULINK.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.7
• /
• pp.3412-3432
• /
• 2019

Recent advances in radio frequency (RF) power transfer provide a promising technology to power sensor nodes. Adoption of mobile chargers to replenish the nodes' energy has recently attracted a lot of attention and the mobility assisted energy replenishment provides predictable and sustained power service. In this paper, we study the joint optimization of mobile charging and data gathering in sensor networks. A wireless multi-functional vehicle (WMV) is employed and periodically moves along specified trajectories, charge the sensors and gather the sensed data via one-hop communication. The objective of this paper is to maximize the uplink throughput by optimally allocating the time for the downlink wireless energy transfer by the WMV and the uplink transmissions of different sensors. We consider two scenarios where the WMV moves in a straight line and around a circle. By time discretization, the optimization problem is formulated as a 0-1 programming problem. We obtain the upper and lower bounds of the problem by converting the original 0-1 programming problem into a linear programming problem and then obtain the optimal solution by using branch and bound algorithm. We further prove that the network throughput is independent of the WMV's velocity under certain conditions. Performance of our proposed algorithm is evaluated through extensive simulations. The results validate the correctness of our proposed theorems and demonstrate that our algorithm outperforms two baseline algorithms in achieved throughput under different settings.

• Journal of Digital Convergence
• /
• v.17 no.7
• /
• pp.351-357
• /
• 2019

A number of case studies and type analyzes have been conducted on mobility platform services that are rapidly evolving around the world. However, since the actual user experience is important for the development of the mobility service, research on the user side is needed. In the mobility platform service, only the car-hailing was used, and the preference factors were analyzed through the questionnaire in seven aspects of the user experience. Studies have shown significant differences according to gender. While the safety of the woman, the comfort and the kindness of the vehicle have a great influence on the satisfaction, the male affirms that the familiarity is the factor affecting the satisfaction. This study focused on the customer experience as a real user and identified key factors of selecting mobility platform service, so it is expected that it will contribute to the development of mobility platform service in the future.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.41 no.4
• /
• pp.138-145
• /
• 2018

In the field of optimization, many studies have been performed on various types of Vehicle Routing Problem (VRP) for a long time. A variety of models have been derived to extend the basic VRP model, to consider multiple truck terminal, multiple pickup and delivery, and time windows characteristics. A lot of research has been performed to find better solutions in a reasonable time for these models with heuristic approaches. In this paper, by considering realtime traffic characteristics in Map Navigation environment, we proposed a method to manage realistic optimal path allocation for the logistics trucks and cargoes, which are dispersed, in order to realize the realistic cargo mixing allowance and time constraint enforcement which were required as the most important points for an online logistics brokerage service company. Then we developed a prototype system that can support above functionality together with delivery status monitoring on Map Navigation environment. First, through Map Navigation system, we derived information such as navigation-based travel time required for logistics allocation scheduling based on multiple terminal multiple pickup and delivery models with time constraints. Especially, the travel time can be actually obtained by using the Map Navigation system by reflecting the road situation and traffic. Second, we made a mathematical model for optimal path allocation using the derived information, and solved it using an optimization solver. Third, we constructed the prototype system to provide the proposed method together with realtime logistics monitoring by arranging the allocation results in the Map Navigation environment.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.9
• /
• pp.1131-1138
• /
• 2019

The importance of coatings has been increasing for different purposes such as prevention of static electricity of auto parts or products, improvement of abrasion and corrosion resistance, and enhancement of esthetics. As a method for measuring the thickness of a coating film, a contact method with probe is commonly used. However, it is problematic that accuracy of the sensor is degraded due to sensor output distortion or load phenomenon, which is caused by a change in magnetic permeability of the core. In this study, we propose a method to reduce the measurement error of the coating film by applying the optimized circuit design and the thickness measurement algorithm to the problems caused by the nonlinear characteristics. The tests result which have been taken with different thickness coating samples show that the measurement accuracy is within ${\pm}2%$.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.9
• /
• pp.1082-1087
• /
• 2019

Video Incident Detection System is a detection system for the purpose of detection of an emergency in an unexpected situation such as a pedestrian in a tunnel, a falling object, a stationary vehicle, a reverse run, and a fire(smoke and flame). In recent years, the importance of the city center has been emphasized by the construction of underpasses in great depth underground space. Therefore, in order to apply Video Incident Detection System to a Double Deck Tunnel, it was developed to reflect the design characteristics of the Double Deck Tunnel. and In this paper especially, the fire detection technology, which is not it is difficult to apply to the Double Deck Tunnel environment because it is not supported on existing Video Incident Detection System or has a fail detect, we propose fire detection using color image analysis, silhouette spread, and statistical properties, It is verified through a real fire test in a double deck tunnel test bed environment.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.6
• /
• pp.83-89
• /
• 2021

To improve the performance of self-driving cars, the introduction of V2X, a communication technology that connects vehicles, infrastructure, and vehicles, is essential. Even if traffic information of the other vehicle is known, the structure of the intersection and a distance calculation algorithm are required for accurate calculations at roundabouts. This paper proposes a design algorithm for a rotating intersection and implemented in Matlab that complies with the national design rules and enables accurate calculations. Assuming the roundabout and the entrance/exit path to be a circle, a method for measuring the distance between vehicles at an arbitrary point was proposed using the horizontal shift of the entrance circle to the main circle. The algorithm could be used in fully autonomous vehicles by designing a roundabout suitable for the terrain by arbitrarily varying the angle between branches and the radius of curvature of the entrance and exit roads, and transmitting a warning signal when a collision between two driving vehicles is expected.

• Journal of Advanced Navigation Technology
• /
• v.25 no.3
• /
• pp.211-216
• /
• 2021

Multiple UAV System has been used for various purposes such as reconnaissance, networking and aerial photography. In such systems, it is essential to form and maintain the formation of multiple UAVs. This paper proposes the algorithm that produces an autonomous distributed control for each vehicle for a flexible formation. This command is a repulsive force in the form of the second-order system by the nearest UAV or mission area. The algorithm uses the relative position/speed through sensing and communication for calculating the command without external intervention. The command allows each UAV to follow the reference distance and fill the mission area as densely as possible without overlapping. We determine the reference distance via optimization technique solving the packing problem. The mission area comprises the desired formation outline and can be set flexibly depending on the mission. Numerical simulation is carried out to verify the performance of the proposed algorithm under a complex and flexible environment. The formation is formed in 26.94 seconds and has a packing density of 71.91%.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.12
• /
• pp.1639-1645
• /
• 2020

In this paper, we propose a virtual full-duplex relaying scheme based on data ferrying using two unmanned aerial vehicles (UAVs). By utilizing high mobility of two UAVs, the proposed relaying scheme can make each UAV communicate with a source node or a destination node when the UAV is near the source node or the destination node. The proposed relaying scheme can overcome the performance limitations of the half-duplex relaying and the implementation constraints of the full-duplex relaying. In addition, we propose an algorithm to shift the center point of two UAVs' trajectory with consideration of inter-relay interference (IRI). We show the simulation results of our proposed trajectory's center point shift algorithm. From the simulation results, it is shown that our proposed relaying scheme can achieve higher end-to-end spectral efficiency (SE) than the conventional static relaying scheme.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.7
• /
• pp.849-856
• /
• 2020

Recently, as the number of high-height vehicles such as double-decker buses has increased, collision accidents have occurred in bridges and tunnels due to the deviation from the designated routes and driver's carelessness. In the case of the existing front collision warning system, it is limited to vehicles and pedestrians, so it is difficult to use it as a pass height warning system for the high height vehicles. In this paper, we propose a system that generates a warning by determining the correlation and time series characteristics of data for each segment using multiple lidar sensors and then determining the possibility of collision in the upper part of the vehicle. Also, the proposed system confirmed the proper operation through a real-time driving test and a system performance evaluation by the Korea Automobile Testing & Research Institute.