• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.12
• /
• pp.2995-3000
• /
• 2013

We investigated the effects of testosterone on the improvement of white adipose tissue explant and its molecular mechanism in adipose tissue of high fat diet-fed male castrated (CAST) mice. The CAST mice treated with testosterone had lower adipose tissue weights, the average size of adipocytes and mRNA levels of $C/EBP{\alpha}$ as well as adipocyte marker genes than the vehicle-treated CAST mice. These results suggest that testosterone prevent the expression of $C/EBP{\alpha}$ and $C/EBP{\alpha}$-mediated adipocyte marker genes, resulting in decreased adipose tissue mass and adipocyte metabolism in male CAST mice. Moreover, this study give a valuable molecular and biological knowledge on testosterone therapy in obese hypogonadal men.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.12
• /
• pp.2853-2858
• /
• 2013

This paper proposes the ITMS(Intelligent Transport Monitoring System) which manages the route and state of freight by using the Meteorological Office, the Transportation Management Center, GPS and Sensors, etc. The ITMS consists of the CIMS(Container Inner Monitoring System) transmitting the inner temperature and humidity of a container, the TMM(Transport Management Module) computing an estimated time of arrival with Freight Vehicle location information and transmits the result to the CIMS, the FMM(Freight Management Module) checking and managing the freight freshness by using the temperature and humidity of the collected containers, and the SMM(Stevedoring Management Module) selecting the container loading and unloading places with the information transmitted from the CIMS, the TMM, and the FMM and attaching the freight formation to containers using an RFID label. The ITMS not only checks the freight condition at intervals but also acquires and manages the freight information with RFID labels rapidly and accurately.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.1
• /
• pp.230-236
• /
• 2015

In these digital times, the image signal processing is being used in various areas like vehicle recognition, security, and robotics. Generally, the image deterioration occurs by salt & pepper noise in the procedures of image transmission, storage, and processing. Methods to remove this noise are SMF, CWMF, and SWMF and these methods have few unsatisfactory noise reduction characteristics in salt & pepper noise environment. Therefore, in order to mitigate salt & pepper noise which is added in the image, this study suggested an algorithm which subdivides the masks in the image into four areas and processes using non-noise pixel numbers in each area. Additionally, in order to prove the excellence of the proposed algorithm, relevant performances were compared with existing methods using PSNR.

• Journal of the Korean Society of Industry Convergence
• /
• v.20 no.2
• /
• pp.177-186
• /
• 2017

With the latest developments in ICT(Information Communication Technology) technology, research on Intelligent Car, Connected Car that support autonomous driving or services is actively underway. It is true that the number of inputs linked to external connections is likely to be exposed to a malicious intrusion. I studied possible security issues that may occur within the Connected Car. A variety of security issues may arise in the use of CAN, the most typical internal network of vehicles. The data can be encrypted by encrypting the entire data within the CAN network system to resolve the security issues, but can be time-consuming and time-consuming, and can cause the authentication process to be carried out in the event of a certification procedure. To resolve this problem, CAN network system can be used to authenticate nodes in the network to perform a unique authentication of nodes using nodes in the network to authenticate nodes in the nodes and By encoding the ID, identifying the identity of the data, changing the identity of the ID and decryption algorithm, and identifying the cipher and certification techniques of the external invader, the encryption and authentication techniques could be detected by detecting and verifying the external intruder. Add a monitoring node to the CAN network to resolve this. Share a unique ID that can be authenticated using the server that performs the initial certification of nodes within the network and encrypt IDs to secure data. By detecting external invaders, designing encryption and authentication techniques was designed to detect external intrusion and certification techniques, enabling them to detect external intrusions.

• Journal of the Institute of Convergence Signal Processing
• /
• v.16 no.4
• /
• pp.156-161
• /
• 2015

In this paper, a dual-polarized multi-band multi-layer antenna for a vehicle, which operates in the GPS, bluetooth, and DSRC bands, was implemented. The antenna was designed as a multi-layer structure, and a FR4-epoxy substrate with =4.4 and =1.6mm was used. GPS and DSRC antennas have circular polarized characteristics, and a single probe feeding method was applied. Simulated results by Ansys HFSS v11 was compared with the measured ones. The size of the optimally designed antenna is $67mm{\times}67mm{\times}4.8mm$, -10dB bandwidth of the anatenna was measured to be 820MHz, 127MHz, and 862MHz in each band, and 3dB AR bandwidth of the antenna was simulated to be 19MHz and 110MHz in GPS and DSRC bands. The results confirmed that suggested system satisfies the system requirements.

• Journal of the Korea Computer Industry Society
• /
• v.3 no.3
• /
• pp.369-382
• /
• 2002

The increase of vehicles stagnations leads to the increasing attention to the way customers pay and a large number of Projects on electronic cash system. Tranport system is comprised of a number of advanced technologies, including information processing, communications, control, and electronics. Recently many research on a system which provides contact in order to protect driver's vehicle passage have been carried out. And some potential problems from that system are being reviewed by electronic cash system. In this papers, we suggest RF protocol developing technology using the concept of electronic cash. ATM electronic cash developing is consist of component of pre-developed coin throw, integration of component using its, and production of more requirement-satisfactory ITS solution. Result increase 15-40% pre-type vehicles stagnations. Especially, we expect this proposed concept would be well adapted to our national environments.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.11 no.6
• /
• pp.103-110
• /
• 2012

In Vehicle Safety Communication (VSC), noted as a representative application of VANET technologies, emergency warning messages (EWM) are broadcast over vehicles in response to an emergency situation. However, as the number of vehicles increases, the so-called Broadcast Storm Problem often occurs due to a huge number of redundant EWM transmitted. Though many approaches in the literature have been proposed to solve the problem, most of them require the preliminary phase for setting up or refreshing neighbor relationship through exchanging beacon messages with nearby vehicles, thereby further increasing the traffic load. In this paper, we propose Longest Leaping Relay (LLR) scheme which can efficiently solve the Broadcast Storm Problem without any preliminary phase for setting up neighbor relationship. Through computer simulations, we compared the performance of the proposed scheme with competitive schemes and verified the proposed scheme outperforms the existing schemes.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.11
• /
• pp.2078-2082
• /
• 2007

Recently, according to traffic accident statistics, traffic accidents occurring at night are as frequent as those during daytime, but their death rate is 1.5 times higher than that of daytime traffic accidents. This problem originates that the insufficient range of vision security of a driver causes the inappropriate accident confrontation. Therefore, in this paper, a microcontroller-based digital control method for the superior performance in headlight system is presented for optimal control that can adapt complex transient state, steady state and various environments. Specially in vehicles# headlight, its fundamental purpose is to implement the artificial headlight system which automatically controls the lighting patterns most adaptive to driving, road and weather conditions. Therefore we aimed at the development of headlight system, focused on the implementation of an artificial vehicle, of more advanced convenience and safety for drivers.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.1
• /
• pp.99-107
• /
• 2008

Recently route guiding system using GPS is spread widely. In the parking management system of complex mall, RFID is mainly used to control status of parking lots. However, in a case that a vehicle only with RFID tag enters into small market-populated district with service of parking lots, there is no parking route guiding system optimized with information of real tine status of parking lots and the system only with GPS can't provide a function of using real time status of parking lots. This paper proposes a location recognizing method of RFID tag object for parking control system to integrated several parking lots in the business district and database-linked route guiding system optimized for parking. The proposed location recognizing method makes the search of optimized parking route possible by abstracting decoding order of tag and antenna number and recognizing direction of tag linked with database. Ihe implemented system that is composed of RFID tag, reader, middleware, server, parking lot clients and mobile clients shows that the proposed method works well and it will be useful for integrated parking control system.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.5
• /
• pp.1004-1012
• /
• 2007

In this paper, we proposed a new car license plate recognition method using an unsupervised ART2 algorithm with HSI color model. The proposed method consists of two main modules; extracting plate area from a vehicle image and recognizing the characters in the plate after that. To extract plate area, hue(H) component of HSI color model is used, and the sub-area containing characters is acquired using modified fuzzy binarization method. Each character is further divided by a 4-directional edge tracking algorithm. To recognize the separated characters, noise-robust ART2 algorithm is employed. When the proposed algorithm is applied to recognize license plate characters, the extraction rate is better than that of existing RGB model and the overall recognition rate is about 97.4%.