• Journal of Korea Society of Digital Industry and Information Management
• /
• v.18 no.2
• /
• pp.9-16
• /
• 2022

The nodes constituting the vehicle ad hoc network (VANET) are vehicles moving along the road and road side units (RSUs) installed around the road. The vehicle ad hoc network is used to collect the status, speed, and location information of vehicles driving on the road, and to communicate with vehicles, vehicles, and RSUs. Today, as the number of vehicles continues to increase, urban roads are suffering from traffic jams, which cause various problems such as time, fuel, and the environment. In this paper, we propose a method to solve traffic congestion problems on urban roads and demonstrate that the method can be applied to solve traffic congestion problems through performance evaluation using two typical protocols of vehicle ad hoc networks, AODV and GPSR. The performance evaluation used ns-2 simulator, and the average number of traffic jams and the waiting time due to the average traffic congestion were measured. Through this, we demonstrate that the vehicle ad hoc-based traffic congestion management technique proposed in this paper can be applied to urban roads in smart cities.

• Journal of Multimedia Information System
• /
• v.6 no.2
• /
• pp.61-66
• /
• 2019

VANET (Vehicular Ad-hoc Network) is a mobile Ad-hoc Network which deals with the moving vehicles. VANET supports Intelligent Transport Systems (ITS) which is related to different modes of transport and traffic management techniques. VANETs enabled users to be informed and make them safer. VANET uses IEEE 802.11p standard wireless access protocol for communication. An important and necessary issue of VANET is to design routing protocols. In a network, communication takes place by the use of the routing protocols. There are mainly two types of communications used such as Vehicle to Vehicle (V2V) and Vehicle to Infrastructure (V2I) in VANET. Vehicles can send and receive messages among them and also to and from infrastructure used. In this paper, AODV, DSR and DSDV are compared by analysing the results of simulation on various metrics such as average throughput, instant throughput, packet delivery ratio and residual energy. Findings indicates utilization of AODV and DSR is more applicable for these metrics as compared to DSDV. A network simulator (NS2) is used for simulation.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.49 no.4
• /
• pp.82-88
• /
• 2012

A VANET (Vehicular Ad Hoc Network), a subclass of MANET (Mobile Ad Hoc Network), is an ad hoc network using wireless communication between vehicles without fixed infrastructure such as base station. VANET suffers a frequent link breakage and network topology change because of the rapid movement of vehicles and the density change of vehicles. From these characteristics of VANET, geographical routing protocols such as GPSR (Greedy Perimeter Stateless Routing) using only the information of neighbor nodes are more suitable rather than AODV and DSR that are used in existing MANETs. However, GPSR may have a transmission delay and packet loss by frequent link disconnection and continual local maxima under the low vehicle density conditions. Therefore, in this paper, we propose a DTVR (Delay Tolerant Vehicular Routing) algorithm that perform a DTN-based routing scheme if there is no 2-hop neighbor nodes for efficient routing under the low vehicle densities in VANETs. Simulation results using ns-2 reveal that the proposed DTVR protocol performs much better performance than the existing routing protocols.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.4
• /
• pp.1223-1236
• /
• 2014

With the extension of wireless technology, vehicular ad hoc networks provide important services for the dissemination of general data and emergency warnings. However, since, the vehicle topology frequently changes from a dense to a sparse network depending on the speed of the moving vehicles and the time of day, vehicular ad hoc networks require a protocol that can facilitate the efficient and reliable dissemination of emergency messages in a highly mobile environment under dense or intermittent vehicular connectivity. Therefore, this paper proposes a new vehicular broadcast protocol, called BL-CAST, that can operate effectively in both dense and sparse network scenarios. As a low overhead multi-hop broadcast protocol, BL-CAST does not rely on the periodic exchange of beacons for updating location information. Instead, the location information of a vehicle is included in a broadcast message to identify the last rebroadcasting vehicle in an intermittently connected network. Simulation results show that BL-CAST outperforms the DV-CAST protocol in terms of the end-to-end delay, message delivery ratio and network overhead.

• Convergence Security Journal
• /
• v.21 no.1
• /
• pp.129-135
• /
• 2021

Greedy protocols show good performance in Vehicular Ad-hoc Networks (VANETs) environment in general. But they make longer routes causing by surroundings or turn out routing failures in some cases when there are many traffic signals which generate empty streets temporary, or there is no merge roads after a road divide into two roads. When a node selects the next node simply using the distance to the destination node, the longer route is made by traditional greedy protocols in some cases and sometimes the route ends up routing failure. Most of traditional greedy protocols just take into account the distance to the destination to select a next node. Each node needs to consider not only the distance to the destination node but also the direction to the destination while routing a packet because of geographical environment. The proposed routing scheme considers both of the distance and the direction for forwarding packets to make a stable route. And the protocol can configure as the surrounding environment. We evaluate the performance of the protocol using two mobility models and network simulations. Most of network performances are improved rather than in compared with traditional greedy protocols.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.1
• /
• pp.127-132
• /
• 2018

One of the key issues in the Unmanned Aerial Vehicle (: UAV) technology is the collision avoidance. Specifically, the collision avoidance among multiple UAVs is critical to expand UAV applications to civil sector where large number of UAVs could be operated in the limited space. In this paper, we introduce a collision avoidance scheme based on Flying Ad Hoc Network (: FANET). The proposed scheme adopts collision avoidance mechanism used in wireless data communication networks. Using this scheme UAVs can not only communicate conventional user information, but also share flight information to avoid collision.

• Journal of KIISE:Information Networking
• /
• v.35 no.2
• /
• pp.166-172
• /
• 2008

This paper proposes an autonomous decentralized frame synchronization system for Ad-hoc Inter-Vehicle Communication Network (IVCN). We have to consider the feature of Ad-hoc IVCN: "time variant" about the number and the location of vehicles and receive power in IVCN, frame timing, and fading. Proposed scheme is different from other decentralized synchronization systems that have association with a fixed base station, and from centralized Personal Communication Systems. This system includes an autonomous decentralized frame synchronization scheme for Ad-hoc IVCN, a high-speed algorithm, a protocol for a newly joining subscriber in IVCN, and a utilization of spread spectrum ranging for frame timing error of the system under highway conditions. Performance evaluation of proposed scheme is validated through simulation. It is shown that Ad-hoc IVCN can be carried out among one and surrounding vehicles in such environment.

• Journal of the Institute of Convergence Signal Processing
• /
• v.12 no.3
• /
• pp.199-203
• /
• 2011

The wireless sensor network (WSN) based on ad hoc network is applied to vehicle parking guide system without parking guide man at area or building with large scale of parking lots. The optimum number of cluster heads was derived for getting the minimum power consumption as well as time delay. Through the theoretical analysis of power consumption and time delay with the number of cluster heads in wireless sensor network, it was found that there exists the minimum point in the variation of power consumption and time delay according to the number of cluster heads.

• Journal of Korea Multimedia Society
• /
• v.21 no.8
• /
• pp.897-908
• /
• 2018

In this paper, we propose a security framework for a cluster drones network using the MAVLink (Micro Air Vehicle Link) application protocol based on FANET (Flying Ad-hoc Network), which is composed of ad-hoc networks with multiple drones for IoT services such as remote sensing or disaster monitoring. Here, the drones belonging to the cluster construct a FANET network acting as WTRP (Wireless Token Ring Protocol) MAC protocol. Under this network environment, we propose an efficient algorithm applying the Lightweight Encryption Algorithm (LEA) to the CTR (Counter) operation mode of WPA2 (WiFi Protected Access 2) to encrypt the transmitted data through the MAVLink application. And we study how to apply LEA based on CBC (Cipher Block Chaining) operation mode used in WPA2 for message security tag generation. In addition, a modified Diffie-Hellman key exchange method is approached to generate a new key used for encryption and security tag generation. The proposed method and similar methods are compared and analyzed in terms of efficiency.

• Proceedings of the IEEK Conference
• /
• 2009.05a
• /
• pp.293-295
• /
• 2009

In an Intelligent Transport System(ITS), data dissemination based on inter-vehicle communication is effective for acquiring real-time traffic-jam information. In this paper, we propose a novel method for traffic jam information dissemination in vehicular ad-hoc networks. In our proposed method, vehicles already trapped in a Traffic-Jam elect leaders according to their locations from upstream and downstream respectively. Then each leader generates traffic data which contains their position, velocity and leader counter respectively, and disseminate the information. {{br}}The implementation of our proposed method is evaluated by means of simulation, and we also present simulation result