• 한국지능시스템학회논문지
• /
• 제4권3호
• /
• pp.32-48
• /
• 1994

This paper proposes the compensation algorithm of conventional shift pattern using fuzzy reasoning in automatic transmission vehicles. Recently, automatic transimssion vehicles are continually increasing because of theire ease to drive. Also users require the high performance which includes the smooth shift quality and shift scheduling that matches driver;s intentions. So the shift scheduling has been inproved significantly through the application of electronic control. But, in spite of this development, vehicles using conventional shift pattern are sometimes in discord with driver's intention on roads. In this paper, the paper, the proposed compensation algorithm makes a automatic transmission vehicle be able to select an optimal gear shifting time and position using fuzzy reasoning and make a vehicle driver feel confortable even when the vehicle runs on roads which is extremely changed. Therefore, a vehicle driver can expect to reduce the nimber of unnecessary gear shifting and expect the fuel efficiency high. To show usefulness of the proposed method, some simulation are made to compared with conventional gear shifting. Paper prosposes the compensation mehtod of conventional shift pattern using fuzzy reasoning for the purpose that a vehicle can select an optimal gerar shifting time and position in automatic vehicle. Though the conventional shift pattern has no pliability, vehicle driver can feel comfortable and can reduce the number of unnecessary gear shifting using the proposed method on variable road condition. Therefore, it can be expected the fuel efficiency.

• 전자공학회논문지 IE
• /
• 제45권4호
• /
• pp.33-41
• /
• 2008

텔레매틱스 시스템의 기능 중 현실적으로 상품성 있는 기능으로 "차량 원격 진단 기능", "운전 패턴 분석 기능"이 있으며 이를 구현하기 위한 기술로는 차량 신호 인터페이스 기술, 자가 진단 인터페이스 기술, 가속도/자이로 센서 인터페이스 기술, PS 신호 처리 기술, 운전 패턴 분석 기술, 무선통신(CDMA) 처리 기술 등이 사용된다. 이러한 기술을 기반으로 본 논문에서는 차량 주행 중에 자각의 EMS(Engine Management System), TMS(Transmission Management System), ABS/TCS, A/BAG 능에서 진단된 차량의 이상 유무를 실시간으로 분석하고, 운전자 주행 패턴 및 차량 관리에 대한 사항을 점검하여 무선통신(CDMA)을 통해 정보센터로 전송하여 이를 DB화함으로써 효율적 차량 관리 및 운전자 관리가 가능하다. 본 연구는 이러한 차량 원격진단 및 운전 패턴 분석기능을 구현하는 H/W와 S/W를 설계 및 제작하고 실차 시험을 통해 이를 검증한다.

• 한국음향학회지
• /
• 제40권4호
• /
• pp.314-319
• /
• 2021

수중운동체의 수중방사소음을 측정하기 위해서는 수중음향 최근접점 거리의 계산과 해표면 반사 등에 의한 음향간섭이 음향준위에 미치는 영향이 고려되어야 한다. 그러므로 본 논문에서는 해표면 반사에 의한 음향간섭으로 발생하는 로이드 미러 효과가 수중운동체의 수중방사소음 측정 결과에 미치는 영향을 분석하고자 하였다. 수중운동체의 수중방사소음 측정결과에 로이드 미러 효과에 의한 주파수스펙트럼 레벨의 변동이 나타나는 것을 확인하였고, 이론식으로부터 예측한 로이드 미러 패턴이 측정결과와 일치됨을 확인할 수 있었다. 확인된 로이드 미러 패턴으로부터 수중운동체의 최근접점거리를 추정하였으며, 표면 간섭으로 나타나는 로이드 미러 효과가 수중운동체의 수중방사소음 준위 분석에 영향을 미치는 것을 확인하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 춘계학술대회논문집
• /
• pp.340-343
• /
• 2006

As the needs of consumer on ride comforts increase and the reduction of road traffic noise tightened step by step, the power unit noise emitted by cars has been reduced. It has been found that tire noise dominates noise produced by the power-train when vehicles are driven at high speeds. Therefore, in these days, tire/pavement noise is concerned. Tire/pavement noise is affected by pavement type and vehicle???s transmission loss. Tire noise mechanism is produced by several mechanisms. The sound of tire can propagate either through the air or through the structure of vehicle. Pattern noise is the result of pressure variations through the air to the interior side of vehicle. Especially, on smooth asphalt the periodicity of tread design, pitch sequence is important factor, which have an influence on the reduction of tire noise.

• 융합보안논문지
• /
• 제8권4호
• /
• pp.105-113
• /
• 2008

차량의 이동성으로 인하여 이동컴퓨팅 환경에서 안정된 서비스 품질(QoS)로 차량소유자가 원하는 정보를 제공받는데 많은 한계점이 있다. 차량의 이동성과 더불어 무선 네트워크의 낮은 대역폭, 높은 전송지연 등의 고유 특성을 부분적으로 보완하기 위해서 유효 데이터의 캐슁 혹은 프리페칭 기법의 적용이 심도 있게 연구되고 있다. 본 논문은 사용자의 프로파일(User Profile, UP)기반 프리페칭 기법을 제안한다. UP기반 프리페칭은 차량의 속도, 이동차량이 과거에 방문한 장소의 빈도수, 이동 차량소유자마다 특정장소에 머무는 시간 그리고 일반적인 사용자들의 특정장소에 대한 사용자들의 개인적 성향에 대한 프로파일을 고려하여 프리페칭 영역을 설정하는 방법이다. 제안된 방법은 기존의 방법들보다 높은 정보의 활용률과 정보검색 실패율을 최소화시키는 성능을 보이고 있다.

• 한국공작기계학회논문집
• /
• 제16권1호
• /
• pp.69-74
• /
• 2007

Topology optimization of the inner reinforcement for a vehicle's hood has been performed by evolutionary structural optimization(ESO) using a smoothing scheme. The purpose of this study is to obtain optimal topology of the inner reinforcement for a vehicle's hood considering the static stiffness of bending and torsion simultaneously. To do this, the multiobjective optimization technique was implemented. Optimal topologies were obtained by the ESO method. From several combinations of weighting factors, a Pareto-optimal solution was obtained. Also, a smoothing scheme was implemented to suppress the checkerboard pattern in the procedure of topology optimization. It is concluded that ESO method with a smoothing scheme is effectively applied to topology optimization of the inner reinforcement of a vehicle's hood considering the static stiffness of bending and torsion.

• 한국분무공학회지
• /
• 제21권1호
• /
• pp.1-6
• /
• 2016

A gasoline injector rig which can measure cumulative injected fuel mass under a vehicle driving condition was developed. The measurement system consists of an engine control unit (ECU), data acquisition (DAQ) and injected fuel collection system using loadcells. By supplying reconstructed sensor signals which simulate the real vehicle's sensor signals to the ECU, the ECU drives injectors as if they were driven in the vehicle. The vehicle's performance was computer simulated by using $GT-Suite^{(R)}$ software based on both engine part load performance and automatic transmission shift map. Throttle valve position, engine and vehicle speed, air mass flow rate et al. were computer simulated. The used vehicle driving pattern for the simulation was FTP-75 mode. For reconstructing the real vehicle sensor signals which are correspondent to the $GT-Suite^{(R)}$ simulated vehicle's performance, the DAQ systems were used. The injected fuel was collected with mess cylinders. The collected fuel mass in the mess cylinder with elapsed time after starting FTP-75 driving mode was measured using loadcells. The developed method shows highly improved performance in fast timing and accuracy of the cumulative injected fuel mass measurement under the vehicle driven condition.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 추계 학술대회논문집(수송기계편)
• /
• pp.144-147
• /
• 2005

The tire is considered as one of the Important noise sources having an influence on vehicle's performance. The Pattern noise of a tire is the transmission sound of airborne noise. On smooth asphalt road, Pattern noise is amplified with the velocity. In recent, the study on the reduction of Pattern noise is energetically processed. Pattern noise is strongly related with pitch sequence. To reduce the pattern noise, tire's designer has to randomize the sequence of pitch. The FFT is a traditional method to evaluate the level of the randomization of the pitch sequence, but gives no information on time-varying, instantaneous frequency. In the study, we found that Time-Frequency transform is a useful method to non-stationary signal such as tire noise.

• 한국소음진동공학회논문집
• /
• 제16권6호
• /
• pp.627-633
• /
• 2006

The tire is considered as one of the important noise sources having an influence on vehicle's performance. The Pattern noise of a tire is the transmission sound of airborne noise. On smooth asphalt road, Pattern noise is amplified with the velocity. In recent, the study on the reduction of Pattern noise is energetically processed. Pattern noise is strongly related with pitch sequence. To reduce the pattern noise, tire's designer has to randomize the sequence of pitch. The FFT is a traditional method to evaluate the level of the randomization of the pitch sequence, but gives no information on time-varying, instantaneous frequency. In the study, we found that Time-Frequency transform is a useful method to non-stationary signal such as tire noise.

• Journal of Electrical Engineering and Technology
• /
• 제9권5호
• /
• pp.1729-1738
• /
• 2014

The offline verification of state of charge estimation, power estimation, fault diagnosis and emergency control of battery management system (BMS) is one of the key technologies in the field of electric vehicle battery system. It is difficult to test and verify the battery management system software in the early stage, especially for algorithms such as system state estimation, emergency control and so on. This article carried out the virtual environment modeling for verification of battery management system. According to the input/output parameters of battery management system, virtual environment is determined to run the battery management system. With the integration of the developed BMS model and the external model, the virtual environment model has been established for battery management system in the vehicle's working environment. Through the virtual environment model, the effectiveness of software algorithm of BMS was verified, such as battery state parameters estimation, power estimation, fault diagnosis, charge and discharge management, etc.