• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2008년도 추계학술대회 논문집
• /
• pp.193-194
• /
• 2008

• 자동차안전학회지
• /
• 제3권2호
• /
• pp.5-10
• /
• 2011

Under the full frontal crash event, seatbelt system is the most typical and primary restraint device that prevents the second impact between an occupant and vehicle interior parts by limiting the forward motion of an occupant in the vehicle occupant packaging space. Today's restraint systems typically include the three-point seat belt with the pretensioner and the load limiter. A pretensioner preemptively tightens the seat belts removing any slack between a passenger and belt webbing which leads to early restraint of a passenger. After that a load limiter controls level of belt load by releasing the belt webbing to reduce occupant injurys. In this study, load characteristics of load limiters are optimized by the computer simulation with a MADYMO model for a frontal impact against the rigid wall at 56kph and then we suggest performance requirements. We derived optimum load characteristic from the results using four vehicle simulation models represented by the vehicle. Based on the results, we suggest the performance from the results of the second optimization using the simulation considering the design and the standardization. Finally, the performance requirements is verified by the sled tests including the load limiter device for the full vehicle condition.

• 한국자동차공학회논문집
• /
• 제21권1호
• /
• pp.1-8
• /
• 2013

Recently, the automotive technology has developed with electronics and information technology as convergence technology while vehicles had been regarded as machines. Moreover, vehicles are becoming more intelligent and safer devices, assembly of advanced technologies by customers' demand. Even though all of installations of vehicle have attracted as diverting devices, it cause drivers' mistakes like delay of response on traffic condition. Here, we proposed the Field Operational Test (FOT) environment which could be used as driving and road conditions collector(Vehicle motion, Traffic condition, Driver input, Driver state, etc.) for researches about Driver Friendly Intelligent System(SCC, LDWS, etc.), Human Vehicle Interface(Driving Workload, etc.) and Economic Drive Model. Furthermore driving patten and fuel consumption patten of drivers were analyzed by measured data and direction of future research was suggested.

• 한국전산유체공학회지
• /
• 제16권1호
• /
• pp.53-59
• /
• 2011

In this study, steady and unsteady aerodynamic analyses of a huge rocket configuration have been conducted in a transonic flow region. The launch vehicle structural response are coupled with the transonic flow state transitions at the nose of the payload fairing. Before performing the coupled fluid-structure transonic aeroealstic simulations transonic aerodynamic characteristics are investigated for the pitching motions of the rocket at finite angle-of-attack. An unsteady CFD analysis method with a moving grid technique based on the Reynolds-averaged Navier-Stokes equations with the k-w SST transition turbulence model is applied to accurately predict the transonic loads of the rocket at pitching motion. It is shown that the fluctuating amplitude of the lateral aerodynamic loads imposed on the rocket due to the pitching motion can be significantly increased in the transonic flow region.

• 대한토목학회논문집
• /
• 제29권1A호
• /
• pp.31-43
• /
• 2009

본 논문에서는 다양한 차종의 영향을 반영할 수 있고, 차량과 교량의 연성 운동방정식을 구성하여 시간 단계별 직접해를 산정할 수 있는 수치해석기법을 제시하였다. 운동방정식의 해는 직접적분법인 Newmark ${\beta}$을 이용하여 해석 단계별로 구성된 유효강성행렬과 유효하중벡터를 바탕으로 정적평형방정식의 해를 구하는 원리와 동일하게 산정하였다. 또한 해석의 효율성을 증진시키기 위하여 유효강성행렬은 Skyline 법에 의해 재구성하였으며, Cholesky의 행렬 분해기법을 동시에 적용하여 직접적인 역행렬 계산에서 야기되는 오차의 발생을 최소화 하였다. 또한 기존선 철도차량인 새마을 PMC 열차와 디젤 견인 무궁화 열차에 대한 3차원 정밀수치해석 모델을 개발하였고, 각 차량은 차체와 전 후방 대차에 각각 6자유도씩 고려하여 총 18자유도로 수치모델을 작성하였다. 교량은 3차원 공간뼈대 요소를 이용하여 모델링하였고, 차륜과 레일 접촉면의 불규칙성은 미국의 FRA에서 규정하고 있는 연직방향 및 횡방향틀림에 대한 PSD 함수를 이용하여 궤도틀림을 수치적으로 구현하였다. 제시된 수치해석 기법은 12 m, 18 m형 판형교의 실측결과를 이용하여 타당성을 검증하였으며, 실측 및 수치해석결과는 교량의 1차 휨 고유진동수의 2.0배를 기준으로 Low pass filtering 하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2002년도 학술대회지
• /
• pp.201-204
• /
• 2002

This paper describes the hydrodynamic characteristics of a test-bed AUV SNUUV-I constructed at Seoul National University. The main purpose of the AUV is to carry out fundamental control and hydrodynamic experiments. Its configuration is basically a long cylinder of 1.35m in length and 0.25m in diameter with delta-type wings near its rear end. On the edge of each wing, a thruster of 1/4HP is mounted, which is used for both drive and turn the vehicle for horizontal movement as the output control power is varied. A pair of control surfaces installed near its font part generates pitch moments for vertical movement. The 6 DOF mathematical model of SNUUV-I contains hydrodynamic forces and moments expressed in terms of a set of hydrodynamic coefficients. These coefficients can be classified into linear damping coefficients, linear inertial coefficients and nonlinear damping coefficients. It is important to estimate the exact value of these coefficients to control the vehicle precisely. Among these, the linear coefficients are known to affect the motion of the vehicle dominantly. The linear damping coefficients are estimated by using Extended Kalman Filter. The responses of the vehicle to input signals are used to estimate the hydrodynamic coefficients, which can be inferred from output signals measured from an IMU (inertial motion unit) sensor, while the linear inertial coefficients are calculated by a potential code. By using these coefficients estimated as described above, a simulation program is constructed using Matlab.

• 한국항해항만학회지
• /
• 제30권10호
• /
• pp.855-860
• /
• 2006

컨테이너 터미널과 같이 다수의 AGV(Automated Guided Vehicle)를 한정된 공간에서 동시에 운용하는 환경에서는 AGV의 작업생산성에 악영향을 주는 충돌, 데드락(deadlock), 라이브락(liveiock)이 발생할 확률이 높다. 또한, AGV의 가/감속 운동은 AGV의 주행시간을 예측하기 어렵게 만들기 때문에 AGV 라우팅을 더욱 어렵게 만드는 요인이다. 본 논문에서는 AGV 사이의 충돌, 데드락, 라이브락을 방지하기 위해 점유영역 예약테이블(Occupancy Area Reservation table; OAR table)을 이용하는 방법과 최적주행경로를 선택하기 위해 가감속 운동을 고려하여 AGV의 주행시간을 추정하는 방법을 제안한다. 시간중심 시뮬레이 션(time-driven simulation)을 통해 제안방안을 실험 한 결과 제안방안의 효과를 확인하였다.

• 동력기계공학회지
• /
• 제16권1호
• /
• pp.84-90
• /
• 2012

In unmanned vehicles' navigation, the shapes of obstacles are generally irregular and complex. The motion of vehicles based on the range sensor system such as ultrasonic sensors or laser sensors can be unstable due to the irregular shape of the obstacles. In this case, to generate stable trajectory of unmanned vehicles equipped with range sensors, we need an approach that can simplify an obstacle's irregular shape information. In this paper, we propose the trajectory generation algorithm that an vehicle can stably navigate in the environments where irregular shaped obstacles are scattered. The proposed method is verified through the analysis of vehicle's trail and direction data acquired by simulations and implementations.

• Journal of Advanced Marine Engineering and Technology
• /
• 제39권2호
• /
• pp.159-165
• /
• 2015

Motion control schemes are generally classified into three categories (point stabilization, trajectory tracking, and path following). This paper deals with the problem which is associated with the initial deployment of a group of Unmanned Surface Vehicle (USVs) and corresponding point stabilization. To keep the formation of a group of USVs, it is necessary to set the relationship between each vehicle. A forcing functions such as potential fields are designed to keep the formation and a graph Laplacian is used to represent the connectivity between vehicle. In case of fixed topology of the graph representing the communication between the vehicles, the graph Laplacian is assumed constant. However the graph topologies are allowed to change as the vehicles move, and the system dynamics become discontinuous in nature because the graph Laplacian changes as time passes. To check the stability in the stage of deployment, the system is modeled with Kronecker algebra notation. Filippov's calculus of differential equations with discontinuous right hand sides is then used to formally characterize the behavior of USVs. The stability of the system is analyzed with Lyapunov's stability theory and LaSalle's invariance principle, and the validity is shown by checking the variation of state norm.

• 한국산학기술학회논문지
• /
• 제20권5호
• /
• pp.621-626
• /
• 2019

자동차의 과도한 차체 운동과 조종 불안정성을 유발하는 대표적인 외란 입력으로는 운전자에 의해 가해지는 조향 핸들 조작이다. 급격하고 과도한 핸들 조작은 SUV 차량처럼 기하학적 및 동역학적 특성에 따라 차량 전복 현상도 발생시킬 수 있다. 본 연구에서는 이에 대응할 수 있는 제어 시스템의 구조화에 대하여 다음과 같이 기초 연구를 수행하였다. 운전자 조종으로 유발되는 횡방향 거동에 대한 수학적 모델링을 수행하고, 이를 토대로 차체 운동을 제어할 수 있는 제어기를 설계하였다. 파라미터 불확실성으로 인한 모델링 오차에 대해 강건한 제어 성능을 확보하기 위하여 $H_{\infty}$ 알고리즘을 적용하였다. 비 연성화된 1/4 차량을 기반으로, 차체에 작용하는 모우멘트에 상응하는 동적 부하를 모사할 수 있는 모델을 제시하였다. 동적 시뮬레이션을 수행하여 부하 모사 모델의 타당성을 파악하였다. 차체- 차축- 서스펜션- 타이어로 조합되는 1/4 실험 차량 장치와 부하 모사 모듈, 서스펜션 제어 모듈 및 Hils 기술을 적용하는 차체 거동 제어 시스템에 대한 프레임워크를 제안하였다.