• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.9
• /
• pp.1684-1692
• /
• 2011

Recently, several vector hysteresis models such as vector Preisach, vector Jiles-Atherton and dynamic E&S model have been proposed to describe vector magnetic properties of electrical steel sheets. However, it is still difficult to find an adequate vector hysteresis model in finite element application for both the Non-oriented and Grain-oriented electrical steel sheets under alternating and rotating field conditions. In this paper, an improved E&S vector hysteresis model is suggested to describe the vector magnetic properties of both Non-oriented and Grain-oriented electrical steel sheets under various magnetic field conditions including alternating and rotating magnetic field conditions. The validity of the proposed model is tested through comparisons with the experimental results under various magnetic field conditions.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.20 no.9
• /
• pp.84-89
• /
• 2006

This paper presents the thickness effect of hysteresis ring of hysteresis motor using finite element method combined with a vector hysteresis model. From the magnitude and direction of the magnetic field intensity, the magnetization of each ring element is calculated by a vector hysteresis model. The developed torque can be obtained with the vector sum of individual torque of each element on the hysteresis ring. From these calculations, it can be found that the motor torque is not in proportion to the thickness of the ring. As a result, there exists a proper point of thickness and that can be determined using the proposed methoㅇ in this paper.

• Proceedings of the KIEE Conference
• /
• 1997.11a
• /
• pp.679-682
• /
• 1997

This paper presents finite element analysis algorithm combined with vector hysteresis model for accurate analysis of the hysteresis motor. Magnetization-dependent vector model is adapted to calculate the vector magnetization. That is to say, from the magnitude and direction of the magnetic field intensity, the magnetization of each ring element is computed by the vector model. By comparing the simulation results with the experimental ones, it is found that good results are obtained.

• Journal of Power Electronics
• /
• v.13 no.1
• /
• pp.59-69
• /
• 2013

An alternative technique to control multilevel inverters with vector approximations has been presented. The innovative control method utilizes specially designed two-dimensional hysteresis comparators to simplify the implementation and improve the resultant waveform. The multistage inverter designed with maximum number of levels is operated in such a way to approximate the reference voltage vector by exploiting the large number of multilevel inverter vectors. A three-stage inverter with the main high voltage stage made of three phase, six-switch and singly-fed inverter is considered for application to the proposed design. The proposed control concept is to maintain a higher voltage stage state as long as it can lead to a target vector. High and medium voltage stages controllers are based on surface hysteresis comparators to hold the switching state or to perform the necessary change to achieve its reference voltage with minimal switching losses. The low voltage stage controller is designed to approximate the target reference voltage to the nearest inverter vector using the nearest integer rounding and adjustment comparators. Model simulation and prototype test results show that the proposed control technique clearly outperforms the previous control methods.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.11 no.4
• /
• pp.293-301
• /
• 2006

This paper proposes a control algorithm for STATic synchronous COMpensator(STATCOM), based on Space Vector Modulation(SVM) and Hysteresis Current Controller(HCC) techniques. STATCOM is used to reactive power compensation on a distribution network. The proposed algorithm utilizes the advantages of the fast dynamic response of the hysteresis current control and the reduced switching number of the SVM scheme. The controller determines a set of space vectors from a region detector and applies a space vector. A set of space vectors including the zero vector, to reduce the number of switching, is determined from output signals of two hysteresis comparators. The presented control system was tested with digital simulation in the Borland C++ program and demonstrate the advantage of the proposed hysteresis current controller.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• v.11B no.4
• /
• pp.164-168
• /
• 2001

In this paper voltage source FEA for hysteresis motor considering magnetic hysteresis characteristics is presented. The Preisach model is used as a hysteresis model. System matrix whose unknown variables are vector potentials and currents is formulated for voltage source. The stiffness matrix is maintained constant by using M-iteration method. Therefore the calculation time and efforts are reduced with Choleski direct method. Current waveform can be calculated for arbitrary voltage vaveform considering hysteresis effects.

• Journal of the Korean Magnetics Society
• /
• v.7 no.2
• /
• pp.109-116
• /
• 1997

This paper describes an implementation of the rotational hysteresis analysis using the finite element method and a vector hysteresis model. The vector hysteresis model is extended from the magnetization-dependent Preisach model. The magnetization of each element is calculated for a given history of the rotating field. The lagging angle and the magnitude of the magnetization for an applied field are evaluated. The experimental results show that the magnetization characteristics of the magnetic materials under the rotating field can be analyzed accurately by the proposed method.

• Journal of international Conference on Electrical Machines and Systems
• /
• v.2 no.2
• /
• pp.165-170
• /
• 2013

This paper presents the iron loss prediction of rotating electric machines taking account of the vector hysteretic properties of electrical steel sheet. The E&S vector hysteresis model is adopted to describe the vector hysteretic properties of a non-oriented electrical steel sheet, and incorporated into finite element analysis (FEA) for magnetic field analysis and iron loss prediction. A permanent magnet synchronous generator is taken as a numerical model, and the analyzed magnetic field distribution and predicted iron loss by using the proposed method is compared with those from a conventional method which employs an empirical iron loss formula with FEA based on a non-linear B-H curve. Through the comparison the effectiveness of the presented method for the iron loss prediction of the rotating machine is verified.

• Tribology and Lubricants
• /
• v.14 no.4
• /
• pp.44-50
• /
• 1998

This paper describes the simulation of the levitation force between permanent magnet and high Tc(critical temperature) superconductor(HTSC). Levitation force is evaluated numerically on the basis of the magnetic vector potential method and the critical state model. The superconductor is approximated to 2-D slab model. By performing computations, the following characteristics have been investigated: the process of the generation of hysteresis, the various hysteretic behaviors. The characteristics of hysteresis are important for the application to magnetic bearing, for the damping and the nonlinear stiffness is related to hysteresis.

• Proceedings of the KIEE Conference
• /
• 1999.07f
• /
• pp.2529-2533
• /
• 1999

This paper proposes a modified hysteresis current control method based on space vector modulation. The proposed method differs from former works in that it uses effective voltage vectors instead of zero vectors while not significantly increasing the circuit complexity. The circuit uses outer band that is slightly wider than the usual current limit band (inner band) to detect the phase of current command and thereby the region information. The comparator output signals associated with the inner and outer band are used to determine the proper voltage vector that minimizes the current error and number of switching, with simple logic circuitry. The utilization of effective voltage vector is of particular importance when the ac-side emf is relatively large. Both the simulation and experiment show that the proposed method is more effective than the conventional one that uses zero vectors, in reducing the number of switching over a range of ac-side emf variation.