• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.264-264
• /
• 2017

Legumes are good sources of various nutrients. Among legumes, soybean and its flour are accessible foods to consumers. However, in case of soybean flour, there is a disadvantage of easily going rancid. Thus, this study aimed to investigate how the quality of soybean flour changes during storage according to the packaging materials and storage temperatures. The raw and roasted soybean flours were packed in two types of packaging, polyethylene (PE) and polypropylene (PP) film bags respectively, and stored at three different storage temperatures (4, 20, and $45^{\circ}C$) for 1 year. The acid value, conjugated diene value, peroxide value, p-anisidine value, thiobarbituric acid (TBA) value, lipoxygenase activity, and fatty acid content of raw and roasted soybean flours were measured at the point of starting storing, and after 1, 2, 4, 8, and 12 weeks of storage. The acid value of soybean flour was increased for 4 weeks and thereafter significantly decreased (p < 0.0001). The conjugated diene value was significantly increased after 4 weeks storage at $45^{\circ}C$ with PE and PP film bags (p < 0.0001). The peroxide value had no changes during 4 weeks storage at $45^{\circ}C$ with PE and PP film bags, and then those was dramatically increased after 8 weeks (p < 0.0001). The p-anisidine values in all of storage conditions were decreased after 4 weeks. Lipoxygenase activity was decreased at 12 weeks storage at $20^{\circ}C$ and $45^{\circ}C$ with PP film bags. Acid value had positive correlations with p-anisidine value (r = 0.30 and p < 0.0001) and lipoxygenase activity (r = 0.36 and p < 0.0001), and had negative correlations with conjugated diene value (r = -0.45 and p < 0.0001) and peroxide value (r = -0.25 and p < 0.001). Conjugated diene value had a high positive correlation with peroxide value (r = 0.76 and p < 0.0001), but that had a negative correlation with lipoxygenase activity (r = -0.51 and p < 0.0001). Peroxide value had negative correlations with p-anisidine value (r = -0.20 and p < 0.01) and TBA value (r = -0.15 and p < 0.05). The degree of reduction in fatty acid content of raw soybean flour was higher than the roasted soybean flour during the storage. Total fatty acid content had positive correlations with acid value (r = 0.45 and p < 0.0001) and p-anisidine value (r = 0.58 and p < 0.0001), but had a weak negative correlation with conjugated diene value (r = -0.19 and p < 0.01). This study showed how the rancidity of the raw and roasted soybean flours progressed during storage. Thus, our findings can be used as base data to do a further study of finding and developing more stable storage conditions of the soybean flour.

• Korean Chemical Engineering Research
• /
• v.43 no.6
• /
• pp.647-661
• /
• 2005

The stereoselective synthesis of chiral terminal epoxide is of immense academic and industrial interest due to their utility as versatile starting materials as well as chiral intermediates. In this review, we investigate the research and development trend in the asymmetric ring opening reactions using cobalt salen catalysts. Hydrolytic kinetic resolution (HKR) technology is the very prominent way to prepare optically pure terminal epoxides among available methods. We have synthesized homogeneous and heterogeneous chiral dinuclear salen complexes and demonstrated their catalytic activity and selectivity for the asymmetric ring opening of terminal epoxides with variety of nucleophiles and for asymmetric cyclization to prepare optically pure terminal epoxides in one step. The resolved ring opened product combined with ring closing in the presence of base and catalyst afforded the enantioriched terminal epoxides in quantitaive yield. Potentially, these catalysts are using on an industrial scale to produce chiral intermediates. The experimental results of HKR technology applied to the synthesis of various chiral compounds are presented in this paper.

• Journal of the Korean Ceramic Society
• /
• v.38 no.10
• /
• pp.894-900
• /
• 2001

The spinel $Li{Mn_2}{O_4}$ catalysts for $CO_2$ decomposition were synthesized by a sol-gel method using manganese acetate and lithium hydroxide as starting materials through drying at $150^{\circ}C$ for 12 hrs under oxygen atmosphere followed by heat treatment at $480^{\circ}C$ for 12 hrs. The synthesized $Li{Mn_2}{O_4}$ were reduced by hydrogen for 3 hrs at various temperatures and the decomposition rate of carbon dioxide was investigated at 300, 325, 350, 375 and $400^{\circ}C$ using the $Li{Mn_2}{O_4}$ reduced by hydrogen gases. As a result of experiment, the optimum temperature of hydrogen reduction and $CO_2$ decomposition was shown $350^{\circ}C$. The physicochemical properties of the spinel $Li{Mn_2}{O_4}$ the reduced $Li{Mn_2}{O_4}$ and the $Li{Mn_2}{O_4}$ after $CO_2$ decomposition were examined with XRD, SEM and TGA.

• Hwankyungkyoyuk
• /
• v.4 no.1
• /
• pp.89-211
• /
• 1993

The Korean government embarked upon ambitious economic development plans in the 1960's the goals of development policy at that time were the elimination of absolute poverty and the alleviation of unemployment. With scant natural resources, the government had to push for industrialization based upon borrowed foreign raw materials with surplus local labor. Preoccupation with the economic goals of industrialization and export expansion left little room for considering environmental protection. It is evident that Korea's exported industrialization strategy of the past three decades has been a success in terms of income, production, and other macroeconomic indicators, but it cannot be denied that a host of undesirable side-effects have been created. These include environmental problems. congestion in several large cities, poor wealth distribution, and regional disparities. The environmental problems were recognized even in the early stage of development, but preoccupation with the pending economic goals of industrialization and export expansion left little room for considering environment protection. The perceived and actual seriousness of the problems, however, has reached such a level that further negligence may imperil political stability and developmental problems facing the world arise from a world economic order characterized by ever expanding consumption and production, which exhausts and contaminates natural resources and creates and perpetuates gross inequalities between and within nations. It will be necessary to develop new culture and ethical values, transform economic structures, and reorient, our lifestyles. Changing lifestyles can not be promoted by government policy initiative alone but through self=generated educational efforts and mutual training by people themselves. The citizens group for environment (NGOs) should assume these educational and training responsibilities starting from grass-root level of people. It must be reawakened to the reality that the environmental preservation for better quality of life is based on the development of human relationships, creativity, spirituality, reverance for the natural world and celebration of life, and is not dependent upon increased consumption of non-basic material goods. To carry on such environment education social movements and NGOs should (1) provides educational methodologies, which focus on values clarification and moving beyond clarification and moving beyond blame to constructive action. (2) provide training for leaders of business and industry, government, union and others on consumption and production. (3) initiate and support the training and work of environmental counselor who encourage responsible consumption. (4) cooperative with media to initiate and strengthen educational programs on the social environmental programs on the social environmental impacts of consumption and production and to build awareness of consumer responsibility and potential. Economic and social development can be compatible with environment protection : both can be achieved simultaneously. Effective environmental management depends on the various factors : political will, institutional arrangements, appropriate legislation, and availability of the requistite financial and technological resources, which is possible with a strong public awareness of the importance of environmental preservation.

• Applied Biological Chemistry
• /
• v.41 no.5
• /
• pp.399-404
• /
• 1998

Genipin was obtained from hydrolysis of geniposide isolated from gardenia fruits with ${\beta}-glucosidase$. Reaction of genipin with glycine, alanine, histidine, lysine, phenylalanine and glutamate in aqueous buffer solution converted colorless starting materials to blue pigments. Effect of pH for the formation of blue pigments was tested using UV/Vis spectrophotometer. The optimum pH for the formation of blue pigments was 7.0. No pigment and trace amounts were formed at acidic (pH 3.0) and alkaline (pH 12.0) conditions, respectively. The amount and tincture of blue color were distinct with different amino acids. In contrast with lysine $({\lambda}_{max}=573\;nm)$, glycine $({\lambda}_{max}=595\;nm)$, phenylalanine $({\lambda}_{max}=602\;nm)$ and alanine $({\lambda}_{max}=595\;nm)$, the reaction of genipin with histidine $({\lambda}_{max}=601\;nm)$ and glutamate $({\lambda}_{max}=601\;nm)$ produced relatively small amounts of blue pigments. Rate constants for the formation of blue pigments from genipin with amino acids at various temperatures $(60,\;70,\;80,\;90^{\circ}C,\;pH\;7.0\;phosphate\;buffer)$ were obtained. Rate constants of genipin with basic amino acids were larger than neutral or acidic amino acids. Arrhenius activation energies of the formation of blue pigments indicated that activation energy of glycine $(E_A=9.8\;kcal/mol)$ was especially lower than those of other amino acids $(E_A=13.3{\sim}15.4\;kcal/mol)$.

• Nuclear Engineering and Technology
• /
• v.50 no.2
• /
• pp.268-279
• /
• 2018

The ALCYONE multidimensional fuel performance code codeveloped by the CEA, EDF, and AREVA NP within the PLEIADES software environment models the behavior of fuel rods during irradiation in commercial pressurized water reactors (PWRs), power ramps in experimental reactors, or accidental conditions such as loss of coolant accidents or reactivity-initiated accidents (RIAs). As regards the latter case of transient in particular, ALCYONE is intended to predictively simulate the response of a fuel rod by taking account of mechanisms in a way that models the physics as closely as possible, encompassing all possible stages of the transient as well as various fuel/cladding material types and irradiation conditions of interest. On the way to complying with these objectives, ALCYONE development and validation shall include tests on $PWR-UO_2$ fuel rods with advanced claddings such as M5(R) under "low pressure-low temperature" or "high pressure-high temperature" water coolant conditions. This article first presents ALCYONE V1.4 RIA-related features and modeling. It especially focuses on recent developments dedicated on the one hand to nonsteady water heat and mass transport and on the other hand to the modeling of grain boundary cracking-induced fission gas release and swelling. This article then compares some simulations of RIA transients performed on $UO_2$-M5(R) fuel rods in flowing sodium or stagnant water coolant conditions to the relevant experimental results gained from tests performed in either the French CABRI or the Japanese NSRR nuclear transient reactor facilities. It shows in particular to what extent ALCYONE-starting from base irradiation conditions it itself computes-is currently able to handle both the first stage of the transient, namely the pellet-cladding mechanical interaction phase, and the second stage of the transient, should a boiling crisis occur. Areas of improvement are finally discussed with a view to simulating and analyzing further tests to be performed under prototypical PWR conditions within the CABRI International Program. M5(R) is a trademark or a registered trademark of AREVA NP in the USA or other countries.

• Journal of Industrial Convergence
• /
• v.21 no.9
• /
• pp.33-39
• /
• 2023

Nano-sized materials can be coated on various substrates, and since this material is transparent and conductive, it can be used as a transparent electrode for electronic devices or an electrode for power supply. In this study, CNT and Ag nanowires were repeatedly coated using the silk screen technique, and samples formed up to 5 times were fabricated, and their optical and electrical properties were measured and analyzed. It was confirmed that marks were formed on the surface of the silkscreen-coated sample according to the coating direction, and the trend of transmittance and surface resistance according to the number of times of coating was investigated. As the number of coatings increased, transmittance and surface resistance tended to decrease. In particular, in the case of transmittance, the range of change was large in the samples coated 2 and 5 times. These changes were confirmed by the Ag nanowire coating. In addition, starting from 700 nm, the previous wavelength region increased according to the wavelength, while the above showed a tendency to decrease. The surface resistance was lowered from 9Ω/cm² when coating once to 0.856Ω/cm² when coating five times. It was found that the resistance value was affected by Ag similarly to the permeability. In the future, it is necessary to realize a desired transparent electrode through Ag concentration and coating of Ag nanowires with other methods and fusion with highly transparent CNT to apply to electronic devices.

• Journal of Korean Institute of Fire Investigation
• /
• v.9 no.1
• /
• pp.103-121
• /
• 2006

We are living in more comfortable circumstances with the social developments and the improvement of the standard of living, but, on the other hand, we are exposed to an increase of the occurrences of tires on account of large-sized, higher stories, deeper underground building and the use of various energy resources. The materials of the floor in a residence modern society have been going through various alterations in accordance with the uses of a residence and are now used as final goods in interioring the bottom of apartments, houses and shops. There are so many kinds of materials you usually come in contact with, but in the first place, we need to make an experiment on the spread of the fire with the hypocaust used as the floors of apartments, etc. and the floor covers you usually can get easily. We, scientific investigators, can get in contact with the accidents caused by incendiarism or an accidental fire closely connected with petroleum stuffs on the floor materials that give rise to lots of problems. on this account, I'd like to propose that we conduct an experiment on fire shapes by each petroleum stuff and that discriminate an accidental tire from incendiarism. In an investigation, it seems that finding a live coal could be an essential part of clearing up the cause of a tire but it could not be the cause of a fire itself. And besides, all sorts of tire cases or fire accidents have some kind of legislation and standard to minimize and at an early stage cope with the damage by tires. That is to say, we are supposed to install each kind of electric apparatus, automatic alarm equipment, automatic fire extinguisher in order to protect ourselves from the danger of fires and check them at any time and also escape urgently in case of fire-outbreaking or build a tire-proof construction to prevent flames from proliferating to the neighboring areas. Namely, you should take several factors into consideration to investigate a cause of a case or an accident related to fire. That means it's not in reason for one investigator or one investigative team to make clear of the starting part and the cause of a tire. accordingly, in this thesis, explanations would be given set limits to the judgement and verification on the cause of a fire and the concrete tire-spreading part through investigation on the very spot that a fire broke out. The fire-discernment would also be focused on the early stage fire-spreading part fire-outbreaking resources, and I think the realities of police tire investigations and the problems are still a matter of debate. The cause of a fire must be examined into by logical judgement on the basis of abundant scientific knowledge and experience covering the whole of fire phenomena. The judgement of the cause should be made with fire-spreading situation at the spot as the central figure and in case of verifying, you are supposed to prove by the situational proof from the traces of the tire-spreading to the fire-outbreaking sources. The causal relation on a fire-outbreak should not be proved by arbitrary opinion far from concrete facts, and also there is much chance of making mistakes if you draw deduction from a coincidence. It is absolutely necessary you observe in an objective attitude and grasp the situation of a tire in the investigation of the cause. Having a look at the spot with a prejudice is not allowed. The source of tire-outbreak itself is likely to be considered as the cause of a tire and that makes us doubt about the results according to interests of the independent investigators. So to speak, they set about investigations, the police investigation in the hope of it not being incendiarism, the fire department in the hope of it not being problems in installments or equipments, insurance companies in the hope of it being any incendiarism, electric fields in the hope of it not being electric defects, the gas-related in the hope of it not being gas problems. You could not look forward to more fair investigation and break off their misgivings. It is because the firing source itself is known as the cause of a fire and civil or criminal responsibilities are respected to the firing source itself. On this occasion, investigating the cause of a fire should be conducted with research, investigation, emotion independent, and finally you should clear up the cause with the results put together.

• Korean Journal of Heritage: History & Science
• /
• v.52 no.3
• /
• pp.38-55
• /
• 2019

The purpose of this study is to clarify the historical flow of baekdong alloy's usage according to the alloying materials mentioned in document records. For this purpose, we first overviewed the use of copper as a base material for white copper alloys and other types of copper alloys. Baekdong is an alloy of copper and other metals and is currently defined as an alloy of copper and nickel. However, depending on the research subjects and time of the scholars, baekdong may be defined as a metal with over a certain percentage of tin added to copper, or as an alloy of tin, zinc, and lead with copper. There is disagreement regarding the interpretation of this term. Baekdong, which started to appear in the literature of the Three Kingdoms Period, has been steadily seen through the Goryeo and Chosun Dynasties to the modern period. It has been used in various ways, according to each age and culture, from the symbol of the office to trading goods, daily life goods, and money. In the literature, baekdong's alloying material is not only copper and nickel, which are currently defined as alloys, but it is the same in that copper is used as the base metal of the alloy, although it varies slightly from generation to generation. In addition to copper, tin, zeolite, and emerald, zinc and lead also appeared. It was found that baekdong, which means alloy, and baekdong, which means white metal, were mixed. Nickel, which is the alloy material of baekdong as it is currently defined, is a metal with a relatively high discovery time and is widely used as a material for modern industrial fields. Nickel was introduced into Korea at the end of the Joseon Dynasty, but its use is not known in detail. In this study, we examined the acceptance and use of nickel-based baekdong in articles of modern newspapers and in statistical data. Based on the experience of craftsmen, we estimated the period when nickel-based alloys were used in crafts. Material is a direct factor in the development and deterioration of technology, and the development of technology is the basis for the changing of civilizations and cultures. In this context, this study was to investigate baekdong with the material of alloys as a starting point.

• Korean Journal of Heritage: History & Science
• /
• v.54 no.1
• /
• pp.120-137
• /
• 2021

There were five palaces built during the Joseon Period. Gyeongbokgung Palace was the first one, founded in the 4th year of King Taejo (1395), and depending on the historical interpretation, Changdeokgung Palace, Changgyeonggung Palace, Gyeongungung Palace (Deoksugung), and Gyeongdeokgung Palace (Gyeonghuigung) were also built. The palaces represent the best architecture of the time. In addition, the palaces of the Joseon period have been rebuilt several times, so they contain the architectural history of the Joseon period over the last 500 years. In this paper, all the excavations of five palaces in the Joseon Period were surveyed, and the foundations of the buildings were analyzed. In particular, the aim of this paper is to investigate Jeoksim (foundations of buildings under cornerstone) to understand the characteristics of each palace by period. Accordingly, the changes of the construction techniques of the foundations of the palaces were studied. There are a total of 23 types of Jeoksim. All five palaces have a certain type (I~V) of construction technique, thus it was confirmed that there was a certain pattern in the method of constructing the foundations of palace buildings in the Joseon Dynasty. In addition, Jeoksim was mainly built by certain materials and construction methods (I-1) during the 14th to the 17th century, but new types of Jeoksim were built in the palaces starting from the 18th century, during the reign of King Jeongjo. In the 19th century, when King Gojong sat on the throne, the Jeoksim was built in various shapes, materials, and in 22 types of construction methods. Up to now, research on the remains of palaces were mainly conducted on the Gyeongbokgung Palace, so it was not possible to confirm the foundations of 17th-18th century buildings, where reconstruction had stopped after the Imjin War in 1592. However, through this study, it was possible to classify the transition periodsstheir features periods of palace building foundation construction from the 14th to the 20th century by comparing the remains of five palace building sites.