• 한국건설관리학회논문집
• /
• 제17권1호
• /
• pp.10-17
• /
• 2016

1996년 국내에 CM 제도가 도입된 이후 지금까지 많은 발전을 이루어 왔고, 그 수요와 계약 또한 꾸준히 증가하고 있다. 또한 향후 CM 시장은 미래 성장 가능성이 있다는 점에서 CM 산업이 지금보다 한 단계 발전하고 해외 경쟁력 향상을 위해서는 발주자의 요구사항과 프로젝트 특성을 반영한 다양한 CM 적용을 위해 산업 공동의 노력이 필요하다. 이에 본 연구는 4가지의 다양한 CM 적용 형태별 사례들을 '업무비중' 및 '업무심도'를 업무기능을 중심으로 분석하고, 사례별로 CM '시장유형' 및 '업무형태'별 유형을 정의하였다. 사례 비교 분석 결과, 각 사례별로 CM 시장 및 적용 업무 유형별 업무 비중과 심도는 다양하게 나타났고, 국내 공공 사례에서 국내 민간 사례, 그리고 해외 민간 사례로 갈수록 시공단계의 품질관리 중심에서 기획, 설계관리, 공정관리 등 사업초기 단계 업무들의 비중과 심도가 높아지면서 전 생애주기 단계에 걸쳐 교과서적인 CM 업무를 수행한 것으로 나타난다. 그러나 현재 대부분의 국내 공공 CM 사업은 시공단계의 감리 업무에 집중된 제도로 인해 CM 적용 다양화를 위한 전 생애주기관점에서 기술경쟁력 강화에 어려움을 겪고 있다는 문제점을 도출하였다. 이에 본 연구는 이러한 문제점을 해결하기 위해 제도, 산업, 그리고 기업차원에서 CM 적용 다양화 방안을 제시하였다.

• 한국전기전자재료학회논문지
• /
• 제20권4호
• /
• pp.342-347
• /
• 2007

$Bi_6Mg_2Nb_4O_{21}(BMN)$ thin films were deposited at various substrates by sputtering system for embedded capacitor applications. BMN thin films deposited at room temperature are manufactured as MIM(Metal/Insulator/Metal) structures. Dielectric properties and leakage current density were investigated as a function of various substrates and thickness of BMN thin films. Leakage current density of BMN thin films deposited on CCL(Copper Clad Laminates) showed relatively high value ($1{\times}10^{-3}A/cm^2$) at an applied field of 300 kV/cm on substrates, possibly due to relatively high value of roughness(rms $50{\AA}$) of CCL substrates. 100 nm-thick BMN thin films deposited on Cu/Ti/Si substrates showed the capacitance density of $300 nF/cm^2$, a dielectric constant of 32, a dielectric loss of 2 % at 100 kHz and the leakage current density of $1{\times}10^{-6}A/cm^2$ at an applied field of 300 kV/cm. BMN capacitors are expected to be promising candidates as embedded capacitors for printed circuit board(PCB).

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2003년도 추계학술발표회 논문집
• /
• pp.33-38
• /
• 2003

We automated high-accuracy data processing routines for various near-real-time GPS applications. The automated system was based on UNIX, and it uses GIPSY-OASIS II and ultra-rapid orbits which is updated twice a day and provided online. The highest error in the estimated site position was 2 cm and 5 cm in the horizontal and vertical directions, respectively. The mean 3-D position error about 2 cm.

• 문화기술의 융합
• /
• 제8권5호
• /
• pp.749-754
• /
• 2022

다양한 의료 응용 분야에서 웨어러블 및 피부 부착형 전자 패치에 피부 표면의 높은 접착력과 내수성이 요구된다. 본 연구에서는 탄소 기반 전도성 고분자 복합 소재에 개구리 발바닥의 육각 채널와 문어 빨판의 흡착 구조 패턴을 모사한 신축성 있는 전자 패치를 보고한다. 개구리의 발바닥을 모사한 육각 채널 구조는 수분을 배수하며, 균열억제 효과를 통해 점착력을 향상 시키며, 문어 빨판을 모사한 흡착 구조는 젖은 표면에서 높은 점착력을 나타낸다. 또한 고점착 전자패치는 실리콘(max. 4.06 N/cm²), 피부 복제 표면(max. 1.84 N/cm²) 등 다양한 표면에 건조 및 젖은 조건에서 우수한 접착력을 가지고 있다. 고분자 매트릭스와 탄소 입자를 기반으로한 고분자 복합소재를 통해 제작된 고점착 전자 패치는 건조 및 습한 환경에서 심전도(ECG)을 안정적으로 감지할 수 있다. 이 연구에서 보여진 특성을 기반으로 제안된 전자 패치는 다양한 생체 신호의 진단을 위한 웨어러블 및 피부 부착 센서 디바이스를 구현하는 잠재적 응용 가능성을 제시한다.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2003년도 The Korea-Japan Joint Symposium
• /
• pp.25-26
• /
• 2003

Electrically conducting polymers such as polypyrrole(PPy) or poly(3,4-ethylene dioxythiophene)(PEDOT) were sequentially polymerized chemically and electrochemically on various kinds of woven fabrics, giving rise to the fabrics with high electrical conductivity. The specific volume resistivity of the fabric prepared in this study was extremely low as 0.2 $\Omega$-cm. We figured out the electrically conducting fabrics were practically useful for many applications such as an EMI shielding material, a flexible surface heating element or a strain sensor for large deformation.

• 한국표면공학회지
• /
• 제47권6호
• /
• pp.330-334
• /
• 2014

In this study, the Zn-Mg alloy coatings with various Mg contents were deposited using an unbalanced magnetron sputtering process. Their surface microstructure, chemical composition, phase, and corrosion property were investigated. The microstructure of the Zn-Mg coatings changed from porous microstructure to dense one with increasing Mg contents in the coatings. As Mg contents in coatings increased, intermetallic phases such as $Mg_2Zn_{11}$ and $MgZn_2$ were detected from X-ray diffraction (XRD) results. The corrosion resistance of the Zn-Mg alloy coatings was investigated quantitatively using electrochemical impedance spectroscopy (EIS) measurement with 3.5% NaCl solution. The results of EIS measurement showed that the charge transfer resistance and the phase angle of the Zn-Mg alloy coatings were increased from $162.1{\Omega}{\cdot}cm^2$ to $558.8{\Omega}{\cdot}cm^2$ and from about $40^{\circ}$ to $60^{\circ}$ with increasing Mg contents from 5.1 wt.% to 15.5 wt.% in the coatings. These results demonstrate that the Zn-Mg coatings with increasing Mg contents showed an enhanced corrosion resistance.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2011년도 추계학술발표대회
• /
• pp.14-14
• /
• 2011

AlInN has been studied extensively over the past few years due to its interesting material properties that are not present in other ternary nitrides. However, basic material study of AlInN has not been reported as much compared to device applications due to the difficulty in the growth. We have performed the material studies from various aspects. A secondary ion mass spectrometry (SIMS) has shown high oxygen content above $1{\times}10^{18}\;cm^{-3}$ with its insensitivity to the growth conditions. While the free carrier concentration observed by the capacitance-voltage (C-V) measurements was about $3{\times}10^{17}\;cm^{-3}$, the activation energy measured by temperature dependent C-V was only about 4 meV. Si doped AlInN (Si level ${\sim}2{\times}10^{18}\;cm^{-3}$) showed almost no carrier freeze-out at carrier density of $1{\times}10^{18}\;cm^{-3}$. More studies were carried out with a transmission electron microscopy, time-resolved photoluminescence and other analytical techniques to understand the results from SIMS and C-V studies. In this report, we will discuss the possible correlations between the abnormal characteristics in AlInN.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.494-494
• /
• 2013

Atmospheric pressure non-thermal plasma of the needle-typed interaction with aqueous solutions has received increasing attention for their biomedical applications [1]. In this context, surface discharges at bio-solutions were investigated experimentally. We have generated the non-thermal plasma jet bombarding the bio-solution surface by using an Ar gas flow and investigated the emission lines by OES (optical emission spectroscopy) [2]. Moreover, The non-thermal plasma interaction with bio-solutions has received increasing attention for their biomedical applications. So we researched, the OH radical density of various biological solutions in the surface by non-thermal plasma were investigated by Ar gases. The OH radical density of DI water; deionized water, DMEM Dulbecco's modified eagle medium, and PBS; 1x phosphate buffered saline by non-thermal plasma jet. It is noted that the OH radical density of DI water and DMEM are measured to be about $4.33{\times}1016cm-3$ and $2.18{\times}1016cm-3$, respectively, under Ar gas flow 250 sccm (standard cubic centimeter per minute) in this experiment. The OH radical density of buffer solution such as PBS has also been investigated and measured to be value of about $2.18{\times}1016cm-3$ by the ultraviolet optical absorption spectroscopy.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제48권12호
• /
• pp.755-760
• /
• 1999

Various fluoride films were investigated for a gate insulator of thin film transistor application. Conventional oxide containing materials like $SiO_2\;Ta_2O_5\; and \; Al_2O_3$ exhibited high interface states which lead to an increased threshold voltage and poor stability of TFT. In this paper, we investigated gate insulators using a binary matrix system of fluoride such as $CaF_2,\; SrF_2\; MgF_2,\; and\; BaF_2$. These materials exhibited an improvement in lattice mismatch, interface state and electrical stability. MIM and MIS devices were employed for an electrical characterization and structural property examination. Among the various fluoride materials, $CaF_2$ film showed an excellent lattice mismatch of 5%, breakdown electric field higher than 1.2MV/cm and leakage current density of $10^{-7}A/cm^2$. MIS diode having $Ca_2$ film as an insulation layer exhibited the interface states as low as $1.58\times10^{11}cm^{-2}eV^{-1}$. This paper probes a possibility of new gate insulator materials for TFT applications.

• Archives of Reconstructive Microsurgery
• /
• 제8권2호
• /
• pp.139-148
• /
• 1999

Since Nakayama's first report about venous flap, many experimental and clinical studies were done about this new type of flap. And due to its various benefits, its applications as arterialized venous free flap type have increased recently. In this study we have attempted to reconstruct composite of defects of the hand with new modification of arterialized venous free flap and simultaneous reconstruction of skin, nerve, tendon were performed successfully. From 1994 to 1999, the defects of the hands in 35 patients were reconstructed with various modifications of arterialized venous free flaps. The range of age was from 19 to 55 years and size of flap ranged from $1{\times}2cm\;to\;14{\times}9cm$. Among them, 12 cases of flap over 20cm in size were included. Indications of flaps were as follows: resurfacing of the defects of the skin (9 cases), simultaneous reconstruction of extensor, skin and digital nerve(2 cases), reconstruction of the skin with extensor(5 cases), as a flap-through type vascular reconstruction(6 cases), for digital nerve reconstruction(2 cases), contracture release(3 cases), and finger tip reconstruction(9 cases). All of the cases except one survived with marginal skin necrosis less than 10%. And relatively large flaps over 20cm in size successfully survived without any delay procedures. Composite reconstructions including tendon and nerve were successful with new modifications of this flap. Arterialized venous free flap is one of the useful procedure in reconstruction of the hand because it has many advantages such as non-bulky and good quality of flap, variable length of pedicle, preservation of major vascular pedicle, less operation time, single operative field and in addition possibility of various modifications.