• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 2000년도 THE THIRD INTERNATIONAL CONFERENCE ON AGRICULTURAL MACHINERY ENGINEERING. V.II
• /
• pp.287-294
• /
• 2000

Calculation of the flexural rigidity value (EI) is indispensable for prescription of deflection characteristics of crop stalks in harvesting□Conventionally□EI has been determined by either average EI of the whole stalk or average EI of each stems divided into node through the calculation method of cantilever with homogeneous section□However□deflection characteristics of crop stalks caused by mechanical operation such as combine harvester were not exactly presumed by these conventional EI through the experiment by authors. Further, actual EI of a stalk changes in company with a change of moisture contents as time passes during the experiment. Finally, efficient calculation method for determining EI is needed in order to improve these problems. In this study, mechanical model based on actual structure of the crop stalk with variety sectional area was proposed. This mechanical model is calculated by the theory of cantilever with continuous stages. Therefore, improvement of both calculating accuracy on EI and efficiency of measuring system was tried. At first, this calculation method was applied to piano wire of which EI was recognized in advance. As a result, EI calculated from this new method coincided approximately with piano wire's EI. Next, applying to crop stalks as same as piano wire, relationship between loads acting on crop stalks and deflection values calculated by EI using this new calculation method was exactly presumed in comparison with conventional method. Further, measuring time of deflection test was greatly reduced. Finally, new calculation method of EI will be available for estimating mechanical characteristics of so many kinds of crop stalks in harvesting operation. Further, in this study, new deflection test using image-processing apparatus by computer will be introduced.

• 대한인간공학회지
• /
• 제11권1호
• /
• pp.81-92
• /
• 1992

A two-dimensional static biochemical model of lower extremity in the seated posture was developed to assess muscular activities of lower extremity required for a variety of foot pedal operations. We found that the double linear optimization method that has been used for modelling articulated body segments does no predict the forces generated by biarticular muscles reasonably, so the revised double linear optimization scheme was used to consider the synergistic effects of biarticular muscles in our model, assuming that the muscle forces are distributed proportionally based on their physiological cross sectional area. The model incorporated three rigid body se- gments with six muscles to represnet lower extremity. For the model validation, three male subjects performed the experiments in which EMG activities of six lower extremity muscles were measured. Predicted muscle forces were compare with the corresponding EMG amplitudes and it showed no statistical difference. The model being developed can be used to design and assess pedal and foot-related tool design.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 C
• /
• pp.1485-1487
• /
• 2000

A variety of target configurations in sputtering process have been proposed to deposit various structures of thin film alloys and compound films. In this study, we presented the comparative experimental results regarding to the characterization of properties of Cu-Ni thin films deposited by using a magnetron co-sputtering method, as a function of target configurations; one is using a single target with varying the area of Ni chips attached on the Cu target and another is using a dual-type target with two targets of Ni and Cu separated each other. Structural(d-spacing, crystal orientation, crystallite size, cross-sectional morphology) and electrical(resistivity) properties of deposited films are characterized and compared as a function of target configurations as well as deposition conditions.

• 대한인간공학회:학술대회논문집
• /
• 대한인간공학회 1994년도 춘계학술대회논문집
• /
• pp.124-135
• /
• 1994

A biomechanical model of lower extremity in seated postures was developed to assess muscular activities of lower extremity involved in a variety of foot pedal operations. It is found that nonlinear optimization method which has been used for modeling the articulated body segments does not predict the forces generated from biarticular muscles reasonably, so the revised nonlinear optimization scheme was employed to consider the synergistic effects of biarticular muscles in the model, assuming that the muscle forces are distributed proportionally based on their physiological cross sectional area and moment arm. The model incorporated four rigid body segments with the nine muscles to represent lower extreimity. For the model valida- tion, three male subjects performed the experiments in which EMG activities of the nine lower extremity muscles were measured. Predicted muscle forces were compared with the corresponding EMG amplitudes and it showed no statistical difference. The developed model can be used to design and to assess the pedals and foot-related equipments design.

• 농업과학연구
• /
• 제9권2호
• /
• pp.569-575
• /
• 1982

수확기간(收穫期間)에 있어서 벼줄기의 물리적(物理的) 및 기계적(機械的) 특성(特性)을 구명(究明)하고져 일반계(一般系) 품종(品種)인 이리(裡里)348 및 진주(晋州)벼와 통일계(統一系) 품종(品種)인 서광벼 및 태백(太白)벼 4개(個) 품종(品種)을 표준시비구(標準施肥區)에서 선정(選定)하여 압축(壓縮), 인장(引張), 굽힘 시험(試驗)을 실시(實施)하고, 이어서 진주(晋州)벼 및 태백(太白)벼에 대(對)하여 부위별(部位別), 전단각도(剪斷角度) 및 함수율(含水率) 변화(變化)에 따른 전단하중(剪斷荷重)-변형특성(變形特性), 전단력(剪斷力) 및 전단(剪斷) energy등(等) 전단특성(剪斷特性)을 측정(測定) 분석(分析)한 결과(結果)는 다음과 같다. 1. 압축(壓縮), 굽힘, 인장(引張) 및 전단력(剪斷力)은 통일계품종(統一系品種)에 비(比)하여 일반계(一般系) 품종(品種)이 컸다. 2. 전(全) 부위별(部位別)의 전단력(剪斷力) 추세는 진주(晋州)벼에 있어서 하부위(下部位)의 큰 값이 상부위(上部位)로 갈수록 감소(減少)하였고, 태백(太白)벼에 있어서는 하부위(下部位)부터 지상(地上) 21cm까지 비교적 일정(一定)한 큰 값으로 나타냈다. 3. 전단면적(剪斷面積)의 증가(增加)에 따라 전단력(剪斷力) 및 전단(剪斷) energy는 증가(增加)하였고, 그 증가율(增加率)은 전단면적(剪斷面積) $10mm^2$까지는 컸으나 그 이상(以上)에서는 매우 둔화(鈍化)되었다. 4. 예취(刈取) 직후(直後)에 있어서 함수율(含水率)의 감소(減少)에 따른 전단력(剪斷力) 및 전단(剪斷)energy의 감소(減少)는 컸으나 함수율(含水率) 60%(w.b)부터는 큰 변화(變化)가 없었다.

• International Journal of Fluid Machinery and Systems
• /
• 제6권2호
• /
• pp.56-74
• /
• 2013

Stall stagnations in the system of axial-flow compressors and ducts occur in transition from deep surge conditions to decayed or converged stall conditions. The present study is concerned with the boundaries between the deep surges and the stagnation stalls on the basis of analytical results by a code on surge transients analysis and simulation. The fundamental acoustical-geometrical stagnation boundaries were made clear from examinations of the results on a variety of duct configurations coupled with a nine-stage compressor and a single stage fan. The boundary was found to be formed by three parts, i.e., B- and A-boundaries, and an intermediate zone. The B-boundary occurs for the suction-duct having a length of about a quarter of the wave-length of the first resonance in the case of very short and fat plenum-type delivery duct. On the other hand, the A-boundary occurs for the long and narrow duct-type delivery flow-path having a length about a fifth of the wavelength and relatively small sectional area in the case of short and narrow suction ducts. In addition to this, the reduced surge-cycle frequencies with respect to the duct lengths are observed to have respective limiting values at the stagnation boundaries. The reduced frequency for the B-boundary is related with a limiting value of the Greitzer's B parameter. The tendency and the characteristic features of the related flow behaviors in the neighborhood of the boundaries were also made clearer.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제17권3호
• /
• pp.231-238
• /
• 1995

The scapular flap, described by dos Santos in 1986, has been used successfully for the reconstruction of a variety of defects of oro-mandible. Some have defined the gross and vascular anatomy of the lateral border of the scapula, yet useful anatomical information and a complete description of area and contour of each cut surface of lateral border of scapula, which is very important for esthetic and functional reconstruction using dental implants, are missing. These prompted us to clarify the cross-sectional area of lateral border of scapula. Twenty three scapulas of 15 fixed adult Caucasian cadavers were sectioned in every 1cm interval along the lateral border of scapular, and the metric relations and the shape of cut surface were assessed. The lateral border of the scapula, consisting of cortico-cancellous bone measuring $7.86{\pm}0.97mm$ in width, $19.6{\pm}2.86mm$ in height and $12{\pm}1.78cm$ in length, could be harvested as an osteocutaneous scapular flap or as a single vascularized bone flap. The mean thickness of cortical bone of lateral, medial, dorsal and costal surface was $0.46{\pm}1.48mm$, $1.78{\pm}1.34mm$, $1.54{\pm}1.11mm\;and\;1.35{\pm}0.87mm$, respectively. So we have thought that all scapular transplants could be supported osseointegrated implants for fixation of dental prosthesis.

• 한국전산유체공학회지
• /
• 제21권2호
• /
• pp.99-105
• /
• 2016

The present study has been carried out to analyze the flow characteristics with geometric shape and control conditions in subsea by-pass valve. The function of by-pass valve is to prevent reverse flow. In this study, the static analysis has been perform for analyzing fluid flow in open state. In order to consider the turbulent effect, the standard ${\kappa}-{\varepsilon}$ model was used. A variety of parametric studies, such as by-pass valve type or size, volume flow rate, leakage hole size, leakage hole position, block type, block shape, were performed. The pressure difference across the valve in the model broadened the flow channel cross-sectional area was greater than the base model for the same operating conditions. As the pipe diameter in the block decreases the pressure difference is greatly increased. The pressure difference according to block shape such as edge type and round was almost negligible. For the same Reynolds number the pressure difference was little changed according to the size of the valve.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2007년도 춘계학술대회
• /
• pp.515-518
• /
• 2007

Gas hydrates are ice-like crystalline compounds that form under low temperature and elevated pressure conditions. Recently, gas hydrates present a novel means for natural gas storage and transportation with potential applications in a wide variety of areas. An important property of hydrates that makes them attractive for use in gas storage and transportation is their very high gas-to-sol id ratio. In addition to the high gas content, gas hydrates are remarkably stable. The main barrier to development of gas hydrate technology is the lack of an effective mass production method of gas hydrate in solid form. In this study, some performance comparison among several cases classified by different volume sizes of solution were carried to identify the characteristics due to the volume increment. And it is found that one of the main reasons disturbing hydrate formation is related to the lack of cooling heat transfer due to the volume increase of the solution. So, three kinds of heat transfer plates which have different shapes and cross sectional areas were made and tested for the performance comparison following to the shape and area of each plate. Finally it is clarified that the heat transfer is one of the major factors effecting hydrate formation performance and the installation of heat transfer plate can enhance the formation performance especially not in terms of the quantity but the speed.

• 자원환경지질
• /
• 제40권1호
• /
• pp.87-101
• /
• 2007

부산시 도심지 지하 지질과 지질구조 그리고 단층손상에 의한 지질위험도를 해석하기 위해 위성영상 및 전산음영기복도, 203개의 시추공 검층, 텔레뷰어, 그리고 지구물리 탐사 자료들을 종합적으로 분석하였다. 이를 통하여 연구지역 지하 지질은 백악기 안산암질$\sim$데사이트질 화산암류, 반려암, 화강암류로 구성되어 있으며, 동래단층을 비롯한 최소 3개의 단층파쇄대가 존재하고 있음이 밝혀졌다. 지형적 특성, 지질단면상의 파쇄대의 폭과 제4기 퇴적층과 기반암 풍화 잔류물의 심도 분포 등을 근거로 할 때, 연구지역의 동래단층은 북쪽으로 갈수록 파쇄대의 폭과 파쇄강도가 줄어들며 연구지역 북부의 서면교차로와 양정교차로 사이 지역에서 분절될 것으로 판단된다. 또한, 서면교차로보다 남쪽의 도심지 계곡부는 대부분 제4기 동안 해침을 경험한 것으로 해석된다. 한편 단층핵과의 거리, 코아회수율, 암질지수, 일축압축강도, S파 탄성파 속도를 입력변수로 작성된 지질위험도는 연구지역의 지하 단층들에 의한 기반암의 손상정도를 가시적으로 표현하는데 유용하였다. 따라서 이러한 평가방법은 기존 암반분류법을 보완하고 지질학적 요인들을 효과적으로 반영할 수 있는 암반평가를 실시하는데 기여할 것이다.