• 한국동물위생학회지
• /
• 제33권3호
• /
• pp.223-231
• /
• 2010

A total of 191 samples collected from the commercial swine farms located in Chungnam province were investigated by PCR to estimate the prevalence of Lawsonia (L.) intracellularis infection. In the group of the pigs with proliferative enteritis, 14 (93.3%) of 15 intestinal samples and 12 (80.0%) of 15 feces were positive in PCR. In contrast, a relatively low positive rate (18.0%, 29 of 161 samples) was determined in the group of normal healthy pigs. The group of pigs over 120 days showed the highest positive rates (26.8%, 15 of 56 samples). In the comparison of the sequences of 210bp for species specific fragments and 301bp for outer membrane protein, the isolates (L1. L2) showed almost 100% identity with the reference L. intracellularis (L08049, USA). For the sequences of partial 16s rDNA, the homologies among the 5 isolates (L1-L5) were 97.4% to 99.3%, and those of 5 sequences (L1-L5) versus 5 overseas reference strains of L. intracellularis ranged from 98.6% to 99.8%. In the comparison of the nucleotide sequences among 5 isolates and other species in Desulfovibrionales showed 82.4 to 99.5% identities. The 5 isolates shared relatively low identities (76.9% to 84.4%) with the species of alpha-proteobacteria. In phylogenetic analysis based on the 16s rDNA sequences, all of the 5 isolates (L1-L5) were located in the same branch with the strains of L. intracellularis that were previously isolated from the pigs in USA and China. Seven strains of Desulfovibrio sp. were clustered in the neighboring branches, whereas alpha and gamma Proteobacteria showed distant relationship with L. intracellularis strains. The present findings suggest that L. intracellularis infection is endemic in the swine farms in the regions, and that the domestic isolates maintained very limited genetic variation.

• Journal of Pharmaceutical Investigation
• /
• 제30권4호
• /
• pp.247-252
• /
• 2000

The advantages of transdermal administration are avoiding hepatic first pass effect, minimizing inter- and intra-patient variation, maintaining steady-state plasma level to provide long-term therapy from a single dose, and allowing a rapid termination of drug input. Clenbuterol, a selective ${\beta}_2-adrenergic$ receptor stimulant, has been introduced as a potent bronchodilator for patients with bronchial asthma, chronic obstructive bronchial disease. For the development of transdermal systems containing clenbuterol, two limiting factors - long lag time and low flux - must be overcome. In this study, we attempted to select optimal formulation for preparation of clenbuterol patch using hairless mouse skin and flow-through diffusion cell. The flux of clenbuterol increased as the percent of clenbuterol dose dependently in the concentration range of 5-15%. Based on this result, we fixed the concentration of clenbuterol as 15%. The effect of various penetration enhancers on percutaneous absorption of clenbuterol through hairless mouse skin was investigated. Labrafil was the most effective enhancer, which increased the permeability of clenbuterol approximately 4-fold compared with the control without penetration enhancer. Optimal enhancer concentration was 3%. The effect of various adhesives on penetration of clenbuterol was also investigated. Among the adhesives studied, MA-31 was the most effective adhesive. Furthermore, the clenbuterol patch composed of 15% clenbuterol, 3% Labrafil and 82% MA-31, which gave most excellent penetration of drug in in vitro penetration study, maintained therapeutic plasma levels in in vivo study using S.D. rats. These studies demonstrated a good feasibility of clenbuterol administration through the intact skin using a transdermal patch, and show a possibility of the development of clenbuterol patches.

• Geomechanics and Engineering
• /
• 제18권2호
• /
• pp.189-203
• /
• 2019

Brine leakage is a common phenomenon during construction facilitated by artificial freezing technique, threatening the stability of frozen wall due to the continual thawing of already frozen domain. This paper takes the frequently encountered soft clay in Wujiang District as the study object, and remolded specimens were prepared by mixing calcium chloride solutions at five levels of concentration. Both the deformation and pore water pressure of frozen specimens during thawing were investigated by two-stage loading tests. Three sections were noted from the changes in the strain rate of specimens during thawing at the first-stage load, i.e., instantaneous, attenuated, and quasi-stable sections. During the second-stage loading, the deformation of post-thawed soils is closely correlated with the dissipation of pore water pressure. Two characteristic indexes were obtained including thaw-settlement coefficient and critical water content. The critical water content increases positively with salt content. The higher water content of soil leads to a larger thaw-settlement coefficient, especially at higher salt contents, based on which an empirical equation was proposed and verified. The normalized pore water pressure during thawing was found to dissipate slower at higher salt contents, with a longer duration to stabilize. Three physical indexes were experimentally determined such as freezing point, heat conductivity and water permeability. The freezing point decreases at higher salt contents, especially as more water is involved, like the changes in heat conductivity. The water permeability maintains within the same order at the considered range of salt contents, like the development of the coefficient of consolidation. The variation of the pore volume distribution also accounts for this.

• Journal of Acupuncture Research
• /
• 제27권4호
• /
• pp.67-84
• /
• 2010

Objectives : To review RCTs on acupuncture treatment for shoulder pain in order to establish a standard acupuncture treatment model in treating shoulder pain. Methods : RCT articles on traditional acupuncture treatment for shoulder pain were searched through online database. Quality of studies were assessed using the FEAS and the modified Jadad score. Results : Eighteen trials of acupuncture for shoulder pain were analyzed. Based on the results of these reviews the following factors might contribute to optimal results from acupuncture treatment. 1) Usage of LI, SI, TE meridians, usage of $LI_{15}$, $TE_{14}$, $GB_{21}$, $LI_{11}$, $LI_4$, $SI_{14}$, $LI_{14}$, $TE_{15}$ acupuncture points. 2) More than four acupuncture points should be used. 3) More than 15 minutes of needle retention time. 4) Needle length-40mm and diameter-0.30mm. 5) More than 9 times treatment 6) More than 5 weeks treatment duration. Conclusions : There was no relation between quality of article and effectiveness of acupuncture. To improve the remedial value, it is necessary to mention De-qi, stimulation of acupuncture and correct variation in diagnosis with the above-mentioned. It is better that clinical trials of acupuncture treatment is designed that type of RCT and double blind. Also when it is set that sham nonpenetrating acupuncture, no treatment group as a control group, and participants don't distinguish wheather acupuncture treatment or not, it will be more meaningful.

• Geomechanics and Engineering
• /
• 제11권4호
• /
• pp.531-552
• /
• 2016

The greenschist in the Jinping II Hydropower Station in southwest China exhibits continuous creep behaviour because of the geological conditions in the region. This phenomenon illustrates the time-dependent deformation and progressive damage that occurs after excavation. In this study, the responses of greenschist to stress over time were determined in a series of laboratory tests on samples collected from the access tunnel walls at the construction site. The results showed that the greenschist presented time-dependent behaviour under long-term loading. The samples generally experienced two stages: transient creep and steady creep, but no accelerating creep. The periods of transient creep and steady creep increased with increasing stress levels. The long-term strength of the greenschist was identified based on the variation of creep strain and creep rate. The ratio of long-term strength to conventional strength was around 80% and did not vary much with confining pressures. A quantitative method for predicting the failure period of greenschist, based on analysis of the stress-strain curve, is presented and implemented. At a confining pressure of 40 MPa, greenschist was predicted to fail in 5000 days under a stress of 290 MPa and to fail in 85 days under the stress of 320 MPa, indicating that the long-term strength identified by the creep rate and creep strain is a reliable estimate.

• Asian Pacific Journal of Cancer Prevention
• /
• 제15권4호
• /
• pp.1879-1883
• /
• 2014

Background: The relationship between obesity and prostate cancer aggressiveness is controversial in recent studies, partly because BMI is the only generally applied marker of obesity. Our study aimed at evaluating the correlation of periprostatic fat (PF) on magnatic resonance imaging (MRI) and adipocytokines with prostate cancer aggressiveness. Patients and method: A total of 184 patients who underwent radical retropubic prostatectomy (RRP) were analyzed retrospectively; different fat measurements on MRI slices and levels of adipocytokines were compared with the clinical and pathologic factors using SSPS ver.13.0. Result: The PF rates showed a statistically significant variation (p=0.019, 0.025) among groups, that is to say, more adipose tissue was distributed in periprostatic areas of high risk patients. Logistic regression analysis adjusted for age revealed a statistically association between the PF, the ratio and the risk of having high-risk disease (p=0.031, 0.024). The levels of IL-6, leptin and c-reactive protein (CRP) significantly increased with the aggressiveness of prostate cancer, and also with PF and its ratio. The strongest correlation was seen between IL-6 and PF (Pearson r coefficient=0.67, P<0.001). No association was observed between adipocytokines and BMI. Conclusion: Periprostatic adiposity not only affects prostate cancer aggressiveness, but also influences the secretion of adipocytokines. IL-6, PF and CRP have promoting effects on progression of prostate cancer.

• Geomechanics and Engineering
• /
• 제28권5호
• /
• pp.531-546
• /
• 2022

Ground displacements caused by the construction of overlapping twin shield tunnels with small turning radius are complex, especially under special geological conditions of construction. To investigate the ground displacements caused due to shield machines in the unique calcareous sand layers in Israel for the first time and determine the main factors affecting the ground displacements, field monitoring, laboratory geological analysis, theoretical calculations, and parameter studies were adopted. By using rod extensometers, inclinometers, total stations, and automatic segment-displacement monitors, subsurface tunneling-induced displacement, surface settlement, and displacement of the down-track tunnel segments caused by the construction of an up-track tunnel were analyzed. The up-track tunnel and the down-track tunnel pass through different stratum, resulting in different construction parameters and ground displacements. The laws of variation of thrust and torque, soil pressure in the chamber, excavated soil quantity, synchronous grouting pressure, and grout volume of the two tunnels from parallel to fully overlapping orientations were compared. The thrust and torque of the shield in the fine sand are larger than those in the Kurkar layer, and the grouting amount in fine sand is unstable. According to fuzzy statistics and Gaussian curve fitting of the shield tunneling speed, the tunneling speed in the Kurkar stratum is twice that in the fine-sand stratum.

• Steel and Composite Structures
• /
• 제38권1호
• /
• pp.17-31
• /
• 2021

Post-earthquake fire is a common disaster which causes serious safety issues to infrastructures. This study aims to investigate the residual loading capacities of circular concrete-filled steel tube (CFST) columns under post-earthquake fire experimentally and numerically. The experimental programme contains two loading steps - pre-damage cyclic loading at room temperature and transient state tests with constant compression loads. Three finite element models are developed and validated against the test results. Upon validation, a total of 48 numerical results were generated in the parametric study to investigate the effects of thickness and strengths of steel tube, axial compression ratio and damage degree on the fire resistance of circular CFST columns. Based on the analysis on experimental and numerical results, the loading mechanism of circular CFST columns is discussed. A design method is proposed for the prediction of fire resistance time under different seismic pre-damage and compression loads. The predictions by the new method is compared with the newly generated experimental and numerical results and is found to be accurate and consistent with the mean value close to the unity and a coefficient of variation around 1%.

• Asian-Australasian Journal of Animal Sciences
• /
• 제19권3호
• /
• pp.315-318
• /
• 2006

Associations were analysed between polymorphisms localized in intron 3 of the growth hormone gene (GH-MspI) and milk production traits of 543 China Holstein cows. A PCR-RFLP method was used for identification of genotypes. The following frequencies of genotypes and alleles were found: 0.77, 0.21 and 0.02 for +/+, +/- and -/-, respectively, and 0.87 and 0.13 for $GH^+$ and $GH^-$, respectively. Significant differences between herds were observed in the frequencies of both genotypes and alleles. The results of least squares analysis showed that in all three lactation phases the GH +/+ cows yielded most milk (p<0.01 for lactation I and p<0.05 for lactations II and III), whereas +/- cows showed higher milk fat content than +/+ individuals (p<0.05 for lactation I and II, and p<0.01 for lactation III). The +/+ cows yielded more fat than +/- individuals (p<0.01 only in lactation I). The +/+ cows yielded more milk protein than +/- individuals (p<0.01 for lactation I, II, and III). The +/+ cows produced milk of higher protein content than that of +/- individuals (p<0.05 only in lactation II). Based on these results, we conclude that the +/+ of GH locus should be the favored genotype in China Holstein cow breeds for use in marker-assisted selection programmes.

• Journal of Electrical Engineering and Technology
• /
• 제11권3호
• /
• pp.609-617
• /
• 2016

Belt-driven Starter Generator (BSG) differs from other mild hybrid systems as the crankshaft of vehicle are not run off. Motor permits a low-cost method of adding mild hybrid capabilities such as start-stop, power assist, and mild levels of regenerative braking. Wound rotor synchronous motor (WRSM) could be adopted in BSG system for HEV e-Assisted application instead of the interior permanent magnet synchronous motor (IPMSM). In practice, adequate torque is indispensable for starter assist system, and energy conversion should be taken into account for the HEV or EV as well. Particularly, flux weakening control is possible to realize by adjusting both direct axis components of current and field current in WRSM. Accordingly, this paper present an off-line current acquisition algorithm that can reasonably combine the stator and field current to acquire the maximum torque, meanwhile the energy conversion is taken into consideration by losses. Besides, on account of inductance influence by non-uniform air gap around rotor, nonlinear inductances and armature flux linkage against current variation are proposed to guarantee the results closer to reality. A computer-aided method for proposed algorithm are present and results are given in form of the Look-up table (LUT). The experiment shows the validity of algorithm.