• Journal of Advanced Marine Engineering and Technology
• /
• 제8권1호
• /
• pp.85-99
• /
• 1984

The stability of the two-phase flow in a heated channel is of great importance in the design and operation of the boilers and light water nuclear reactors, because it can cause flow oscillations and lead to a violation of thermal limits with resultant overheating of the channels and cladding. This paper presents a systematic evaluation to the variation effects of the basic four (4) dimensionless parameters in a homogeneous equilibrium model. The flow stability is examined on the ground of static characteristic curves. The complicated transfer function of flow dynamics which gives consideration to the transport lag of density wave is derived, and the transient flow stability is analysed by applying the Nyquist stability criterion in control engineering. The analysis results summed up as follows 1. The coolant flow becomes stable in large friction number and specific flow, while it is unstabale in small friction number and flow. 2. Large phase-change number and Froude number destabilize the two-phase flow, but small numbers stabilize it. The effect to variation of phase-change number is more dominant compared with Froude number. 3. The dynamic analysis is required to hold the sufficient safety of heated channels since only static results does not keep it. The special attention could be payed in the design and operation of heat engines, because the unstaable region exists within the stable boundary at small and middle phase-change number and Froude number.

• 품질경영학회지
• /
• 제24권4호
• /
• pp.90-102
• /
• 1996

Process incapability index which is intended to evaluate the process capability by measuring process incapability provides more detailed information by dividing information about the process mean and variance. But when the target value is not consistent with the center of specification, it is very difficult to evaluate the process capability accurately. Thus it is necessary to improve the existing process incapability index. The improved process incapability index can identify the variation of the process faster than other process capability indices when applied firstly, to the precision process which can be affected sensitively by the change of the process, secondly, to the ordinary process where cost difference from the change of process is noticeable. By using subindices such as inaccuracy index and imprecision index, it is easier for quality manager to find where the cause of the variation of process is, and to take necessary action in advance.

• 전기학회논문지
• /
• 제62권9호
• /
• pp.1223-1227
• /
• 2013

If the factory test efficiency and field operation efficiency of water turbine are different from each other, issues for efficiency warranty can be raised. So, This paper shows the result for comparative analysis of field operating efficiency vs plant testing efficiency of the water turbine generator installed in agricultural reservoir. The efficiency of the induction generator is analyzed by the change of rotational speed with the parameter obtained by test, the efficiency of water turbine is calculated by the change of head with the design flow. Efficiency deviation of induction generator is lower but the variation of developed power is pretty high near the rated speed and the efficiency variation of water turbine is high by the fluctuation of head for constant flow. It was found that factory test efficiency and total efficiency of water turbine generator calculated according to the rotational speed are very close.

• Applied Microscopy
• /
• 제4권1호
• /
• pp.1-4
• /
• 1974

Hitachi HU-125C 전자현미경에 있어서 각 렌즈 전류의 연동에 따른 카메라 상수의 변화를 주사하였다. 시료의 높이 변화가 카메라 상수의 변동에 현저한 영향을 끼치고 있음도 알 수 있었다. 전자회절상과 시편상의 회전은 결정시료를 사용하여 측정하였다. 금속박막을 조사연구함에 있어서 전자현미경의 실제석인 조작방안을 적정화하기 위한 몇 가지 문제를 조사하였다. 본 실험진행을 전자현미경 작업을 통하여 크게 도와 준 김수철씨에게 진심으로 감사드립니다.

• 한국전기전자재료학회논문지
• /
• 제22권3호
• /
• pp.193-198
• /
• 2009

Recently, characteristic research by the changes in the spectrum, one of the factors that influence analysis of maximum output power of PV module, has been studied. In this paper, a one-day intensity of solar irradiation, change of spectrums with time and electrical output for spectrums are analyzed. As a result, blue-rich wavelength compared with red-rich wavelength has large variation of solar irradiance with time, so we recognized that change of solar irradiance is dominated by variation of blue~rich wavelength. Also in same intensity of solar irradiance, electrical output in blue-rich wavelength was 3-8 % higher than one in red-rich wavelength.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2000년도 제1회 학술대회 논문집
• /
• pp.121-122
• /
• 2000

The understanding of reset scheme is essential for the driving of AC PDP (Plasma Display Panel). The characteristics of reset period of AC PDP was examined with the variation of pulse time and voltage in the ADS (Address Display Separated) driving method presented by Fujitsu,. The addressing characteristics showed drastic change as a function of the erasing time and addressing pulse width. In this paper, these results were explained by the change of wall charge variation, and it was estimated with the currents through each electrode.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제54권8호
• /
• pp.358-363
• /
• 2005

This paper presents the reasonable design parameters of a switched reluctance motor to drive a hybrid electric vehicle by using the equivalent magnetic circuit method. The designed motor can be redesigned by using finite element analysis as a variation of the parameter for the purpose of improving performance. This paper shows that a flat-topped current of a phase can be made from a change of the lamination stack length for high average torque and a lower torque ripple. The change of current falling time as a variation of turn-off angle was shown by finite element analysis. The core loss and copper loss were described. The torque of the redesigned motor is suitable for low and high speed ranges to drive a HEV. which is verified by the speed-torque curve.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2006년도 춘계학술대회 논문집
• /
• pp.288-292
• /
• 2006

Usually, equations that calculate ground resistance of earth electrode was already informed well by form of earth electrode. But, when apply on the spot because general expressions are very insufficient at point that calculate exact ground resistance value by variation of earth electrode, and constant value that corrective coefficient for ground resistance calculation is fixed regardless of change of the earth resistivity specially is presented, it is actuality that difficulty is. Therefore, in this study, about these problem, proposed corrective coefficient for calculation of ground resistance according to change of the earth resistivity.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 1993년도 추계학술발표회논문집
• /
• pp.103-106
• /
• 1993

This paper describes the modeling of winding vibration for a variation of load and temperature. The structural changes in transformer windings due to heat cause the change of vibration patterns. The vibration signals were detected by the accelerometer on the transformer windings. The real values were compared with estimated value using least-squares method, vibration model was cstablished and with this model, error compared with original signal was less than -50[db]. These results could be applied to diagnosis of incipient failures of the power transformers.

• 대한전기학회논문지
• /
• 제43권2호
• /
• pp.233-243
• /
• 1994

Generally, fuzzy PI controller that regulates the gains using fuzzy algorithm shows high performance in speed response. However, it has some problems to the load inertia variation, because the change of speed error(CE) is in a fixed range. As load inertia increases, CE is decreased and the usuage of fuzzy table is limited. Therefore, the output of the fuzzy controller has a limited range. This paper proposes an improved fuzzy PI controller. To reduce the speed overshoot, we adapt a control method that selects a proper CE range with respect to the load inertia variation. The proposed controller is applied to the vector controlled system with 2.2kW induction motor. Some simulation and experimental results are exhibited. With these results, we can easily find that proposed PI controller is more robust than the conventional fuzzy PI controller against the load inertia variation.