• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.10 no.1
• /
• pp.208-222
• /
• 2000

This study was conducted to supplement limit of previous study, The objectives of this study were to select optimal conditions of high performance liquid chromatography(HPLC) operation for detecting urinary 2-thiothiazolicline-4-carboxylic acid(TTCA) and thiocarbamide simultaneously, and to evaluate recovery rates for various liquid-liquid extration method of these metabolites, The results are as follows : 1. The urinary TTCA and thiocarbamide were separate sharply when flow rate is $0.7m{\ell}/min$, using a series $C_8$ and $C_{18}$ column, 50 mM $KH_2PO_4$ : acetonitrile (93.5 : 6.5) and pH 3.5 as a mobile phase. The retention time was TTCA, $12.07{\pm}0.11$(mean${\pm}$SD, n=06), thiocarbamide, $7.85{\pm}0.01$ (mean${\pm}$SD, n=6), respectively. The calibration curve for TTCA and thiocarbamide was linear within the range 0.05 to $30{\mu}g/m{\ell}$. 2. By the liquid-liquid extration, butanol extration with $(NH_4)_2$ as a salting-out reagent was used as a simultaneous extration method for these metabolites in acid state, and recovery rates of this method are urinary TTCA, $49.6{\pm}17.7$ (mean${\pm}$SD, n=16), thiocarbamide, $43,9{\pm}5.50$ (mean${\pm}$SD, n=16), respectively 3. The precision(pooled coefficients of variation for 4 concentration) of the urinary thiocarbamide analysis was 0.03754 by butanol liquid-liquid extraction with $(NH_4)_2$ as a salting-out reagent, and TTCA was 0.04082 by ethyl acetate liquid-liquid extration with $(NH_4)_2$ as a salting out reagent The above results show that the butanol liquid-liquid extraction with $(NH_4)_2$ as a salting-out reagent in acid state, and using a series $C_8$ and $C_{18}$ column, 50 mM $KH_2PO_4$ : acetonitrile (93.5 : 6.5) and pH 3.5 as a mobile phase are suitable for the analysis of urinary TTCA and thiocarbamide simultaneously. The detection limit of TTCA and thiocarbamide was about $0.17{\mu}g/m{\ell}$, $0.07{\mu}g/m{\ell}$.

• Proceedings of the KIEE Conference
• /
• 1996.07c
• /
• pp.1532-1535
• /
• 1996

Diamond-like carbon (DLC) films have been prepared by a widely-used plasma CVD with an rf (13.56MHz) plasma of $CH_4$ gas. The hydrogen incorporated in DLC films plays an important role of determining the film properties, but its exact role has not been clear. In this study, the effect of hydrogen on the film properties of DLC has been examined by adding the hydrogen gas to the $CH_4$ gas during deposition and by exposing the prepared film to the hydrogen plasma. As the content of additive hydrogen gas increases, the density and hardness of the film increase, but the growth rate decreases. The FT-IR spectroscopy results show that the number of C-H bonds decreases with increasing the hydrogen gas. Also, the variation in the position of "G" and "D" peaks due to additive hydrogen, which has been measured by the Raman spectroscopy, indicates of $sp^3$ fraction.

• Journal of the Korean Society for Precision Engineering
• /
• v.14 no.12
• /
• pp.73-85
• /
• 1997

The rolling force and roll deformation behavior in the twin roll type strip continuous casting process has been computed to estimate the thermal charcteristics of a caster roll. To calculation of rolling force, the relationship between flow stress and strain for a roll material and casting alloy are assumed as a function of strain-rate and temperature because mechanical properties of a casting materials depends on tempera- ture. The three dimensional thermal dlastic-plastic analysis of a cooling roll has also been carried out to obtain a roll stress and plastic strain distributions with the commercial finite element analysis package of ANSYS. Temperature fields data of caster roll which are provided by authors were used to estimated of roll deformation. Roll life considering thermal cycle is calculated by using thermal elastic-plastic analysis results. Roll life is proposed as a terms of a roll revolution in the caster roll with and without fine failure model on the roll surface. To obtain of plastic strain distributions of caster roll, thermomechan- ical properties of roll sleeve with a copper alloy is obtained by uniaxial tensile test for variation of temperature.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.62 no.3
• /
• pp.166-171
• /
• 2017

For high-quality colored rice production, the cultivation environment is a critical factor. The major environmental factor is temperature, which includes the accumulated and average temperature during vegetative and reproductive stages. Generally, during the cultivation period, the temperature can be controlled by shifting the transplanting date. This study was carried out to determine the optimum transplanting date for high-quality red-colored rice production. Four red-colored rice varieties (Jeokjinju, Jeokjinjuchal, Hongjinju, and Gunganghongmi) were used as test materials. The transplanting dates were May 20 and June 5, 20, and 30 in 2015~2016. The most variable factor controlled by the transplanting date was the grain filling rate. The varieties transplanted on June 30 showed low yields owing to the decrease in the grain filling rate. In contrast, the polyphenol content increased with increasing delay in the transplanting date. Collectively, these two results indicate that the optimum transplanting date was June 20. The average temperature for 30 days after the heading date (30DAH) highly affected the polyphenol content. A lower temperature during the 30DAH induced higher polyphenol contents but also caused low yield. The optimum 30DAH temperature for obtaining a higher yield and polyphenol content was $22{\sim}23^{\circ}C$. Using the average 30DAH and accumulated temperatures, the optimum transplanting date was calculated as June 18 to 24 in Miryang region. The optimum transplanting date of Kyeungsangnamdo region was approximately mid-June to early July, and that of Kyeungsangbukdo region was approximately early to mid-June.

• Solar Energy
• /
• v.19 no.1
• /
• pp.19-27
• /
• 1999

In this study, basic design data which were required for development of highly efficient ice storage system with low temperature latent heat were experimentally obtained. The ice storage system considered in this study was the one that has been widely used in the developed country and called the ice-on-coil type. Using the system, the ice storage performance for various design parameters which were the flow direction and the inlet temperature of the secondary fluid was tested. In addition, the clockwise variation of the heat transfer characteristics of the PCM in the ice storage tank were investigated. During the melting processes in the ice storage tank with several vertical tubes, decrease of the solid-liquid interface area, which was the heat transfer area, between the floating ice and the water made the decreasing rate of IPF less. Also, the total melting energy for the upward flow of the secondary fluid was higher than that for the downward flow during the melting process, but this trend did not appear if the initial temperature of the PCM was $4^{\circ}C$. The average ice recovery efficiency for the upward flow of the secondary fluid was higher than that for the downward flow.

• Asian-Australasian Journal of Animal Sciences
• /
• v.4 no.4
• /
• pp.395-398
• /
• 1991

Physiological reactions of 24 six months old (22.7 kg. body weight) Barki ram lambs, to hot summer conditions, as influenced by asbestos shading at Maryout area were studied. Animals (12 shaded and 12 Unshaded) developed hyperthermia during summer as their rectal temperature (RT) and respiration rate (RR) were always higher (p<0.01) than normal. Asbestos shading caused higher (p<0.05) RT and RR ($39.5^{\circ}C$ and 69.9 r.p.m. vs. 39.2 and 45.7 r.p.m.) of rams at morning (6-8 a.m.) which became lower ($39.9^{\circ}C$ and 104.3 r.p.m. vs. $40.1^{\circ}C$ and 120.5 r.p.m.) in afternoon (2-4 p.m.) as compared to sun exposure. Shading also resulted in higher hematocrit value (PCV) (35.3% vs. 33.0%) and lower (p<0.05) daily weight gain (128.57 vs. 131.43 g). Diurnal (p<0.01) and monthly (p<0.05) RT and RR changes were closely associated with air temperature (AT) fluctuations. Monthly variation (p<0.05) in PCV was evident. Puberty was reached one month later in the shaded as compared to the unshaded group (265 vs. 232.3 day, respectively). It is concluded that asbestos shading prevents efficient heat dissipation to the sky by hyperthermic rams during summer nights. Construction materials for animal shelters are of extreme practical importance.

• Korean Journal of Animal Reproduction
• /
• v.10 no.2
• /
• pp.192-203
• /
• 1986

Two experiments in this study were designed to compare the potential for in vitro capacitation and in vitro fertilization of ejaculated sperm among individual rabbit bucks. In experiment 1, for in vitro capacitation, the ejaculated sperm were preincubated in DM for 12 hr or 18 hr after HIS treatment, then 12 hr -or 18 hr- preincubated sperm were incubated with superovulated rabbit ova in a 5% CO2 incubator for 36 hr at 38$^{\circ}C$, and a part of cleaved ova was transferred to the recipient does for implantation of embryo. In experiment 2, effect of lysolecithin addition to preincubation medium on induction of accelerated in vitro capacitation and in vitro fertilization of individual rabbit sperm was studied. Experiment 1; 1. Percent acrosome reaction of sperm, noted after staining, after 12 hr or 18 hr preincubation ranged from 52.5 to 76.0% and from 67.5 to 90.0%, respectively and sperm motility index of these sperm ranged from 20.0 to 47.5 for 12 hr-preincubated sperm and from 15.0 to 37.5 for 18 hr- preincubated sperm. There was no a certain relation between percent acrosome reaction and sperm motility index. 2. In vitro fertilization rate (cleavage rate) of in vitro capacitated sperm varied widely among individual bucks, ranging from 0 to 47.8% for 12 hr - preincubated sperm and from 0 to 60.9% for 18 hr -prein- cubated sperm. Cleavage rate of 18 hr - preincubated sperm was higher and faster than that of 12 hr - preincubated sperm. 3. Eight of 44 in vitro fertilized embryos transferred into 6 recipients were implanted in 4 recipients (66.7%) up to day 15 and implnatation rate was 18.2%. Experiment 2; 1. The percent acrosome reaction of sperm before and after 4 hr preincubation in DM without lysolecithin varied significantly among individual bucks, ranging from 0.4 to 18.4% and from 1.7 to 37.4%, respectively and percent acrosome reaction of sperm at 30 min after addition of 60${\mu}$g/ml lysolecithin also was significantly different among bucks, ranging from 19.2 to 67.1%. 2. Effect of accelerated acrosome reaction following lysolecithin addition was more considerable in the individuals showed less percent acrosome reaction before and after 4 hr preincubation. Percentage of motile sperm and motility score showed a trendency towards a decrease with increase of preincubation time and time after lysolecithin addition. 3. In vitro fertilization rate (cleavage rate) at 24 hr postinesmination with pooled sperm were treated to 60 $\mu\textrm{g}$/ml lysolecithin for 30 min after 4 hr preincubation was 24.6%, a higher rate than 13.2% for control. While 80 $\mu\textrm{g}$/ml lysolecithin-added sperm showed a lower cleavage than control and 60$\mu\textrm{g}$/ml-added sperm at both 24 hr and 48 hr postinsemination. These results from 2 experiments suggest that more useful preincubation time for the in vitro capacitation of ejaculated rabbit sperm is 18 hr in DM after HIS treatment, although there is wide variation in vitro capacitation and in vitro fertilization rate among individual bucks, and lysolecithin addition to at least 4 hr - preincubated sperm in DM can result in almost same in vitro fertilization rate as that of 18 hr - preincubated sperm in the experiment 1.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.36 no.6
• /
• pp.545-553
• /
• 1991

To find out the basic data for the possibility of agricultural utilization for GSA (Glutamine Synthetase Activity), the effect of nitrogen on the GSA in wheat leaf discs, the variation of GSA after light treatment and the comparative activity of GS during preservation were studied. The result of this study suggested that GSA could play an important and direct regulatory role in the nitrogen assimilation by wheat. During the growth stage of wheat its integral activity was found to closely match the organic nitrogen content. GS may therefore be the rate limiting enzyme in inorganic N assimilation. Moreover, integral GSA was closely correlated with grain yield and grain nitrogen. GSA could be suitable to utilize as a parameter for super type selection and an indicator for optimum nitrogen fertilization. Throughout the experiment, the contents of NO; were increased by N fertilization so that the NO; content was not attributable to change in the level of GSA. At investigation during dark-light transition of culture, no change in the level of GSA was observed until after 8-14 hours in the light treatment. And the level of GSA in wheat leaf discs during preservation at refrigerated storage $(-20^{\circ}C)$ was stable until 12 weeks, when its leaf discs were sampled with liquid nitrogen.

• Asian-Australasian Journal of Animal Sciences
• /
• v.26 no.6
• /
• pp.864-873
• /
• 2013

In developing countries, biogas energy production is seen as a technology that can provide clean energy in poor regions and reduce pollution caused by animal manure. Laboratories in these countries have little access to advanced gas measuring equipment, which may limit research aimed at improving local adapted biogas production. They may also be unable to produce valid estimates of an international standard that can be used for articles published in international peer-reviewed science journals. This study tested and validated methods for measuring total biogas and methane ($CH_4$) production using batch fermentation and for characterizing the biomass. The biochemical methane potential (BMP) ($CH_4$ NL $kg^{-1}$ VS) of pig manure, cow manure and cellulose determined with the Moller and VDI methods was not significantly different in this test (p>0.05). The biodegradability using a ratio of BMP and theoretical BMP (TBMP) was slightly higher using the Hansen method, but differences were not significant. Degradation rate assessed by methane formation rate showed wide variation within the batch method tested. The first-order kinetics constant k for the cumulative methane production curve was highest when two animal manures were fermented using the VDI 4630 method, indicating that this method was able to reach steady conditions in a shorter time, reducing fermentation duration. In precision tests, the repeatability of the relative standard deviation (RSDr) for all batch methods was very low (4.8 to 8.1%), while the reproducibility of the relative standard deviation (RSDR) varied widely, from 7.3 to 19.8%. In determination of biomethane concentration, the values obtained using the liquid replacement method (LRM) were comparable to those obtained using gas chromatography (GC). This indicates that the LRM method could be used to determine biomethane concentration in biogas in laboratories with limited access to GC.

• Asian-Australasian Journal of Animal Sciences
• /
• v.28 no.6
• /
• pp.862-869
• /
• 2015

The current study was designed to estimate the pork quality traits using metabolites from exsanguination blood and postmortem muscle simultaneously under the Korean standard pre- and post-slaughter conditions. A total of 111 Yorkshire (pure breed and castrated male) pigs were evaluated under the Korean standard conditions. Measurements were taken of the levels of blood glucose and lactate at exsanguination, and muscle glycogen and lactate content at 45 min and 24 h postmortem. Certain pork quality traits were also evaluated. Correlation analysis and multiple regression analysis including stepwise regression were performed. Exsanguination blood glucose and lactate levels were positively correlated with each other, negatively related to postmortem muscle glycogen content and positively associated with postmortem muscle lactate content. A rapid and extended postmortem glycolysis was associated with high levels of blood glucose and lactate, with high muscle lactate content, and with low muscle glycogen content during postmortem. In addition, these were also correlated with paler meat color and reduced water holding capacity. The results of multiple regression analyses also showed that metabolites in exsanguination blood and postmortem muscle explained variations in pork quality traits. Especially, levels of blood glucose and lactate and content of muscle glycogen at early postmortem were significantly associated with an elevated early glycolytic rate. Furthermore, muscle lactate content at 24 h postmortem alone accounted for a considerable portion of the variation in pork quality traits. Based on these results, the current study confirmed that the main factor influencing pork quality traits is the ultimate lactate content in muscle via postmortem glycolysis, and that levels of blood glucose and lactate at exsanguination and contents of muscle glycogen and lactate at postmortem can explain a large portion of the variation in pork quality even under the standard slaughter conditions.